|
|
With our Aluminium Gear pumps manufacturers and Motors we can offer a complete product range for a wide arrenge of applications
High efficiency
Cont. pressure up to 275 professional bar admissible
Low noise
Wide choice of integrated cocks |
|
| Diener Precision Pumps manufacture the highest quality and most accurate precision external magnetic drive supplier of gear pumps in the world. With flow ranges from 5 ml/min to 10 L/min our pumps are designed to give optimum performance over a wide range of applications. |
|
Pulsefree pumping with suppliers of gear pumps up to 12 liter/min and differential pressures up to 5.6 bar.
REGLO compact gear pumping, footprint only 10 by 18 cm
MCP programmable gear pump, IP65 |
|
A new and complete range of pumps for transferring and delivering oil, operated by direct current motors. PIUSI products respond perfectly to market demand. The pumps are especially designed for transferring oil from drums, or mobile tanks, in situations where electricity or compressed air connections are not available. The motor is equipped with a direct current battery so that oil transfer or delivery operations can always be carried out.
Use the pressure-switch version to deliver oil without the inconvenience of having to start or stop the pump.
Thanks to their compactness and easy installation these pumps can be used for equipping mobile oil pumps on vehicles or used independently with battery equipped trolleys. They can also be used as primary installations when carrying out oil transfer or handling operations in yards, ports, aboard vehicles or boats. |
|
Maag Pump Systems industrial gear pumps are displacement pumps for high pressure environments. Their performance and long lifespan increase the efficiency of your manufacturing plant. They are used in diverse processes as feed, professional reactor discharge and industrial booster pumps for low and high-viscosity applications.
The new extrex® 70-5 HV gear pump has a maximum ∆p of 200 bar and a 25% higher specific volume due to its wider gear design. The new extrex® gear pump is also available in models such as HP for ∆p up to 400 bar, RB for rubber processing, and the standard GP for regular extrusion process applications. |
|
| Maag Pump Systems suppliers of gear pumps are displacement pumps for high pressure environments. Their performance and long lifespan increase the efficiency of your manufacturing plant. They are used in diverse processes as feed, professional reactor discharge and booster pumps for low and high-viscosity applications. |
|
| DPP offers an assortment of quality gear pumps used in a wide range of applications, from critical medical devices to professional ink jet printing; from laboratory analysis equipment to water industrial purification systems; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low pulse-less flow or low noise application requirements. |
|
| Diener Precision Pumps manufacture the highest quality and most accurate precision external magnetic drive gear pumps manufacturer in the world. With flow ranges from 5 ml/min to 10 L/min our pumps are designed to give optimum performance over a wide range of applications. |
|
| DPP offers an assortment of quality manufacturer of gear pumps used in a wide range of applications, from critical medical devices to professional ink jet professional printing; from laboratory analysis equipment to water industrial purification systems; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low pulse-less flow or low noise application requirements. |
|
Industrial gear pumps and motors built in three pieces with an extruded body in high resistance aluminium alloy.
The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in an infinite variety of applications. |
|
| Viking jacketed bitumen / asphalt pumps are used globally for bitumen transfer and metering in bitumen refining and bulk storage, hot mix asphalt plants, for bitumen emulsions and rubberized bitumen, for truck-mounted professional seal coat applications, pipelining and for bitumen sound dampening applications. These cast iron pumps offer shaft packing or manufacturer of mechanical seal options. |
|
Manufacturer of gear pumps made of cast iron in two pieces.
A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space.
Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30 and 40
Max. peak pressure up to 4785 psi (330 bar)
Max. speed up to 4000 min-1 |
|
Single or Multiple configurations
Flows to 29 gpm @ 2400 rpm with pressures to 3000 psi
Motors up to & over 40hp
|
|
Manufacturers of gear pumps are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from choccolate to diesel fuel. Our gear pumps have sturdy design, offering high reliability as well as long life.
Johnson Pump's gear pump design is based on an internal idler gear rotating inside of a larger rotor. Internal gear pumps are robust, give an even flow, handle both low and high viscosity products, are capable of high pressure and are self-priming.
Johnson Pump manufactures the TopGear-series of internal gear pumps; with the TG L-range for low viscosity - high volumetric efficiency, TG G-range for general purpose and the TG H-range for high demanding applications. |
|
External manufacturer of gear pumps from Micropump provide a continuous, pulseless flow. The rigid design of the gears and housing allows for high pressures and the ability to pump a wide range of fluids. Manufactured in an assortment of chemically resistant material options, these compact, magnetically driven gear pumps provide accurate fluid delivery in a durable, leak-free design.
Whether you use the cavity style or the revolutionary suction professional shoe design, Micropump gear pumps are engineered to deliver peak performance in any application and can meet the following specifications:
- Displacement range 0.017 to 24.5 ml/rev
- Flow rates to 42 L/min
- Differential pressures to 8.7 bar
- System pressures to 106 bar
- Max. viscosity 5000 cps
|
|
| Viking external suppliers of gear pumps are available in cast and ductile iron and composite materials, in sealed and mag-drive designs. Their high-pressure capabilities are used in many clean-liquid process, metering and transfer applications, including rotating equipment lubrication. Composite pumps are used for dosing chemicals. Operating at motor speeds, they may be mounted directly to the drive motor, offering a very small footprint. |
|
| Magnus Pump, a Viking Pump brand, offers the APP series external manufacturer of gear pumps. They provide economical, off-the-shelf application flexibility, with superior quality and performance. With 13 sizes and choice of shaft packing, lip seal ring or mechanical seal supplier, these cast iron pumps are truly general-purpose, capable of handling any non-corrosive liquid from very low to very high viscosity. |
|
Series 9000C-O
This planetary oil-bath gear drive pump achieves up to 110-117 gpm (416-443 lpm) and 80 psi (5.5 bar). The series includes models 9000C-O, 9006C-O, 9008C-O, 9016C-O, 9018C-O, and 9028C-O.
Series 9000C-O-SP
This self-priming gear driven pump achieves up to 115-119 gpm (435-450 lpm) and 77 psi (5.3 bar). The series includes models 9006C-O-SP and 90016C-O-SP.
Series 9000P-O
This planetary oil bath gear driven pump achieves up to 94-99 gpm (356-375 lpm) and 80 psi (5.5 bar). The series includes models 9006P-O, 9008P-O, 9016P-O and 9018P-O. |
|
| For handling abrasive liquids like filled bitumens, professional inks, professional paints and abrasive slurries, these pumps feature hard faced professional seals, hard rotor and shaft materials, and various hardening options for the casing and head. Abrasive liquid pumps typically offer several times the life of a standard iron pump in abrasive applications. |
|
Industrial gear pumps are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from choccolate to diesel fuel. Our gear pumps have sturdy design, offering high reliability as well as long life.
Johnson Pump's gear pump design is based on an internal idler gear rotating inside of a larger rotor. Internal gear pumps are robust, give an even flow, handle both low and high viscosity products, are capable of high pressure and are self-priming.
Johnson Pump manufactures the TopGear-series of internal gear pumps; with the TG L-range for low viscosity - high volumetric efficiency, TG G-range for general purpose and the TG H-range for high demanding applications. |
|
Maag Pump Systems Textron builds its manufacturer of gear pumps to a modular design that adapts easily to customers’ requirements and industrial references.
Housings are available in iron, steel or stainless steel, with or without heating jackets. Manufacturer of bearings, industrial shafts and gears offer a similarly wide choice of materials and configurations.
Five classes of axial clearance and eight classes of radial clearance, coupled with Maag’s expertise in simulation, allow individual pumps to be specified for the highest possible efficiency. A wide choice of professional seals ensures safety in demanding applications.
|
|
Industrial gear pumps and motors made of cast iron in two pieces.
A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space.
Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30 and 40
Max. peak pressure up to 4785 psi (330 bar)
Max. speed up to 4000 min-1
High operating pressures
High efficiency at high temperature
Low noise emission
Exceptional working life expectancy
Solid and compact design
Custom design
|
|
When you need to produce and control high pressures, forces and torques permanently for mobile applications, then there are some pre-conditions:
- robust, service-friendly technology
- small size
- low weight
- as flexible multiple use of a component as possible
- easy handling and operation
The KRACHT mobile hydraulic components meet these requirements exemplarily. A glance at the technical data will convince you. |
|
KF manufacturer of gear pumps are used for pumping a wide variety of
fluids.
KF gear pumps are distinguished especially by their wide
range of variants which are assembled as required on the
modular principle and also permit subsequent upgrade.
The pumps are also suitable for media with low lubricating
properties.
The standard housing sections are of grey cast iron.
The gear units are manufactured from high-strength
case-hardening steel, hardened and mounted in special
multi-compound plain bearing bushes.
The standard drive shaft is sealed by rotary shaft
lip-type industrial seal.
All pumping sizes incorporate helical tooth system.
This feature, combined with special gear geometry,
results in extremely low noise levels and reduced
pressure pulsation. |
|
When you need to produce and control high pressures, forces and torques permanently for mobile applications, then there are some pre-conditions:
- robust, service-friendly technology
- small size
- low weight
- as flexible multiple use of a component as possible
- easy handling and operation
The KRACHT mobile hydraulic components meet these requirements exemplarily. A glance at the technical data will convince you. |
|
Gear pumps manufacturer are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from choccolate to diesel fuel. Our gear pumps have sturdy design, offering high reliability as well as long life.
Johnson Pump's gear pump design is based on an internal idler gear rotating inside of a larger rotor. Internal gear pumps are robust, give an even flow, handle both low and high viscosity products, are capable of high pressure and are self-priming.
Johnson Pump manufactures the TopGear-series of internal gear pumps; with the TG L-range for low viscosity - high volumetric efficiency, TG G-range for general purpose and the TG H-range for high demanding applications.
|
|
Internal manufacturers of gear pumps from Micropump. No other technology offers precise and accurate fluid delivery with the same high-pressure and low-flow rate capabilities in such a small package. Tiny micro-annular pumps are suitable for low viscosity liquids such as deionized water, methanol, solvents, oil, and lubricants. High-precision rotors provide accurate flow rate control, helping conserve valuable liquids. Internal gear technology keeps pulsation to an absolute minimum for smooth, constant flow.
Product Summary
- Dispense rates as small as 0.5 microliters
- Flow rates to 288 ml/min
- Accuracy within +/- 1%
- Max. differential pressure 80 bar
- Max. temperature 60 degrees C |
|
Positive displacement pumps
Positive displacement pumps have a capacity directly proportional to the rotation speed and virtually independent of the differential pressure. They can handle liquids of all viscosities by reducing the rotation speed as the viscosity increases. There are many different types, for example, gear pumps manufacturers (internal and external), progressing cavity pumps, screw pumps, lobe pumps, etc. |
|
| The Jacketed Universal Professional seal series heavy duty internal gear pumps suppliers feature jacketing in the bracket and head or relief cock for rapid melting of solids before startup. Available in cast iron, ductile iron, steel or stainless steel, they handle a broad range of liquids and process applications. These pumps offer a unique seal chamber capable of accepting shaft packing, component-type single and double mechanical seals suppliers, cartridge-type single and double mechanical seal and triple lip seals. A broad selection of port sizes and orientations (90- and 180-degree ports) allows easy installation. ATEX conformity available. |
|
|
