|
|
- 18,000 RPM Extension Vacuum cut-off tool uses 3" (76 mm) diamond cut-off wheels with 3/8" (10 mm) center hole
- 1 hp motor delivers cutting speed power
- Vacuum shroud effectively captures source dust |
|
Nitto Kohki´s "MYTON" Pneumatic sanding machines:
- A wide variety of models are available to a particular job
- Rated Air Pressure: 6 bar
- Free Speed: between 7.100 and 22.000 rpm
- Depressed center wheel: between OD 58 and OD180 mm
- Mass (Weight): between 0,5 kg and 3,4 kg |
|
- 20,000 RPM cut-off tool uses 3" (76 mm) diamond cut-off professional wheels with 3/8" (10 mm) mandrel
- An attached, non-marring plastic flange protects surfaces during cutting
- .7 hp motor delivers cutting speed power
- Tool is equipped with 94300 Dynaswivel®
- A 3" (76 mm ) diamond wheel with integrated mandrel is required (sold separately)
- Unique shroud and flange design add to existing cut-off family
- Ideal for trimming fibreglass/composite parts |
|
LIGHTWEIGHT DYNINGER®
- Air-Powered Abrasive finishing tool to use with Spindle-Mount, Arbor-Mount and Eyelet Sanding Stars.
- Excellent for use on wooden parts, moldings, raised panels and intricate profiles.
- Tool includes 94407 Air-Flow Control Dynaswivel® professional fitting for maximum tool maneuverability and control.
|
|
Die professional grinders of the brands Yokota are used for most light dressing / fettling
applications on fabrications and die setting sets. |
|
Model GR60 Cup Stone Professional grinder
Features:
- 6 inch diameter wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF cock
- 6000 rpm maximum
Model HG60 Bull Nose Grinder
Features:
- 2.5 inch cone wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model HG80 Grinder
Features:
- 8 inch wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model FG10 Frog Grinder
Features:
- Grind Frogs, rail ends or mis-matched rail
- 6 inch wheel
- 5/8 inch - 11 arbor
- 3-position pivot allows for 3 separate grinding operations
- Height adjustment
- Feathering ON/OFF valve
- 6000 rpm maximum
Model PG10 Profile Grinder
Features:
- Grind rail from 90# to 140#
- 6 inch wheel
- 5/8 inch - 11 arbor
- Adjustable flange professional wheels
- Height adjustment
- Feathering ON/OFF valve
- 6000 rpm maximum
|
|
Choose Atlas Copco professional grinders and boost your productivity!
Offering high power-to-weight ratios, Atlas Copco grinders give you maximum material removal with minimum effort, thus boosting your productivity. Available in a wide range of versions covering virtually every application, these robust tools are extremely reliable and simple to maintain, with long service lives.
Their ergonomic design, including efficient noise and vibration damping, makes them easy on the operator in demanding applications.
For a completely new experience, try the GTG and GTR 40 Turbo grinder - twice the power, half the weight and beyond your imagination! |
|
800 Watt Angle Professional grinder W 8-115
High-powered angle grinder with extra high cooling capacity for fast work progress even under the toughest operating conditions
Sturdy, durable Metabo marathon motor
Metabo dust protection technology for extremely long service life of unit: marathon motor with winding protection grid, fully enclosed switch, labyrinth seals on the ball bearing, ...
Ergonomic housing design with distinctive indents for comfortably holding the device during clearing and roughing, as well as slip-proof holding of the unit
Diecast aluminium gear unit housing: robust and resistant to wear
Metabo S-automatic torque limiting professional clutch: to limit any sudden reverse torque that can occur if tools jam or get caught.
Additional vibration damping Metabo VibraTech (MVT) handle for convenient continuous operation
The tool-free adjustment and removal of the protective cover allows you to adjust the device for any application in seconds
Metabo winding protection grid to protect the motor from abrasive effects
Highly durable switch-off carbon professional brush with dust protection housing |
|
Angle Die Professional grinders
The Atlas Copco governed die grinders offer the very best of productivity, reliability and ergonomics.
Best performance, low weight The speed governor keeps the rotational speed close to the maximum free speed when feed-force is applied. The use of a speed governor enables a smaller and smoother design while maintaining access to power.
Built-in ergonomics for the best working environment The unique suspension of motor and suppliers of spindle of the LSF series prevent unpleasant vibrations from being transferred to the operator's hand. Well tuned motors and air outlet keep sound levels remarkably low.
Minimized burr consumption A suspension of the spindle prevents the burr from chattering. Apart from a smoother die grinding operation, the burr consumption is minimized, in many applications by 20 %.
Wide range You can choose the suitable model for your application - from heavy duty versions to small, angle die grinders. Short and extended models (E).
LSF28 ST030 is lubrication free for clean environment. |
|
CP Industrial professional grinders:
These tools are suitable for high professional production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
CP RediPower grinders:
RediPower tools are suitable where the tool is used intermittently for industrial maintenance or non-intensive production. |
|
TSD 385
Due to the lamella motor, the lubricant-free drive of this industrial grinder is thoroughly unique and patented. Similar to the turbo drive, this machine is lubricant-free yet still slim and easy to handle. The life cycle can be compared to lubricated lamella motors. A double bearing manufacturer set allows the grinder to also be used for extreme applications. |
|
Industrial Tools
Your success is our success
The innovation drive at MANNESMANN DEMAG Drucklufttechnik KG knows no compromise. And the permanent
technical further development of our quality industrial tools always has utmost priority
for more customer benefits.
Focal aspects in the development of new precision tools are therefore
- improvement of performance data,
- extension of the product service life,
- reduction of noise emissions for an added environmental benefit,
- perfection of ergonomic design to make life easier for the worker
In development and design, MANNESMANN DEMAG Drucklufttechnik KG has always used state-of-
the-art technology - from the first CAD 3D drawings right through to the thoroughly tested
end product. |
|
Industrial Tools
Your success is our success
The innovation drive at MANNESMANN DEMAG Drucklufttechnik KG knows no compromise. And the permanent
technical further development of our quality industrial tools always has utmost priority
for more customer benefits.
Focal aspects in the development of new precision tools are therefore
- improvement of performance data,
- extension of the product service life,
- reduction of noise emissions for an added environmental benefit,
- perfection of ergonomic design to make life easier for the worker
In development and design, MANNESMANN DEMAG Drucklufttechnik KG has always used state-of-
the-art technology - from the first CAD 3D drawings right through to the thoroughly tested
end product. |
|
ULTRA-PRECISION MULTI-PURPOSE MICRO-GRINDER :
- Digital display enhances further safety and efficiency.
- Compact and functional design made easy to carry around.
- Soft touch switches permit easy operation and long service life. |
|
ULTRA-PRECISION HIGH TORQUE AIR PROFESSIONAL GRINDER :
- High torque air motor assembled with special vane mechanism.
- Two types of manufacturer of air motors can be selected depending on the application.
- 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected. |
|
The Model 600 machine provide fast and effective graining, finishing, fetling and surface conditioning. Designed to run nylon, flap, wire, and buffing wheels. Variable speed options extend the range and capability of the Model 600 machine.
Composite, vitreous, and stone wheels are prohibited on the Model 600, and Burr King professional grinders.
The Model 800 machine provide fast and effective graining, finishing, deburring and surface conditioning. Designed to run nylon, flap, wire, and buffing wheels. Variable speed options extend the range and capability of the Model 800 machine.
Composite, vitreous, and stone wheels are prohibited on the Model 800, and Burr King grinders.
The Model 1000 deburrs, grains, polishes, cleans, descales, and buffs at a single station, a single machine, and a single operator.
The Model 1200 deburrs, grains, polishes, cleans, descales, and buffs at a single station, a single machine, and a single operator. |
|
- Model HS-24
- Sanding speed 1000RPM
- Grinding belt size 158"x4"
- Table area 48"x24"
- Table height from floor 830mm
- Motor 3hp |
|
Developed from the well proven belt sanding machines for woodworking in outmost robust and long
lasting construction especially for the hard requirements in the metal working.
Special machines on request. |
|
- Disc grinder and Random Orbital grinder Combination
- 12,000 RPM Dynalocke® is truly "two tools in one", easily changing from a rotary Disc Professional sander to Random Orbital Sander with the flip of a switch
- Includes low profile, premium urethane sanding pad
- Very lightweight with ultra-smooth sanding performance
- Ideal for paint stripping and blending |
|
|
|