|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Through its Sabre brand Scott Health and Safety was a pioneer of Escape Breathing Apparatus technology. The original concept for the coveted Sabre ELSA - Emergency Life Support Apparatus was developed to help avoid unecessary loss of life, like that seen during the falklands war. During this conflict it was found that 90% of fatalities on HMS Sheffield died through smoke inhalation.
The result of research conducted by Scott Health & Safety led to the development of the 'ELSA', which has now become industry standard terminology for Escape Breathing Apparatus. The ELSA is in now in its third generation and is available in either positive pressure or constant flow models giving 10 or 15 minute escape periods.
|
|
| ... products without technical information |
| |
| Recently, Seelen A/S launched a new horizontal hood stretch machine; the EasyOn, which is a patented solution developed specifically to pack long, homogeneous loads, such as gypsum wallboards, insulation and wooden floors. The EasyOn pushes the products through the foil, allowing products to be packed that up till now had to be shrink packed or stretch wrapped, as they were ill-suited for stretch hood packaging due to their large circumference. |
|
COMBINED MACHINE FOR THERMORETRACTILE MOD. FTB/419
It is able to offer the stretching and the heat shrinking of goods stacked on pallets thanks to a single machine, reducing the spaces of plant. The action of stretching is carried out by a coil in tubular thermoretractile and the heat shrinking is carried out by air partially recycled in a stainless steel ring. This machine works with every type of low-pressure gas reducing at the most the waste of energy. There is the possibility of fitting an appliance in that raises pallets allowing the thermoretractile film to fix itself on the lowest part of pallets. |
|
Bag station (2 models):
501 : for pre-cut pallet covers on rolls. The hood is separated at the perforation.
561 M : for gusseted tubing. Each bag is made at the necessary height (electro-pneumatic sealing and cutting ; motorised film winding down).
|
|
COMBINED SHRINK HOODING MACHINE IMC
Two-real combined hooding and shrinking machine. It automatically forms tubular film hoods and places them over palletised products. The machine may put hoods on pallets with different heights, and is able to work with two film sizes. Automatic selection of one reel or the other allows processing of pallets with widely different base dimensions, even in random sequence, with optimum results in terms of packaging appearance and cost-effectiveness. Extremely simple and reliable, its compact size makes it easy to install in existing handling lines. Complete with four gas burners producing a flameless flow of hot air, individually controlled by a flame control system with safety solenoid valve, guaranteeing perfect combustion and preventing the emission of unburnt gases into the environment. The special distribution of the combustion air inside the burner ensures excellent stability, and thus perfect shrinking, in a single work-station. The machine conforms to current regulations.
TECHNICAL DATA:
Hourly production rate: 50 pallets
Film used: Thermoshrink polyethylene-thickness: 80-200 micron
Rated power: 5,5 Kw
Electrics: 400 V THREE- PHASE 50Hz
Air pressure: 6 bar
Air consumption per cycle: 50 NI
Machine weight : 2000 Kg
Gas used : natural Gas/Lpg
Gas pressure: 40 Mbar
Oven Thermal Potential: 320 Kw max
Gas consumption per cycle: 0,15 m3
The data and dimensions of the standard model refer to a pack with the following dimensions F=800, L=1200, H=1200, T=610. |
|
| It’s a stretch cold extension machine with extensible film as far as a tubular coil, a model with one coil. The cover fitting is suitable for every type of product because there are not flames or warm air. This plant links the thermoretractiles qualities concerning the pallets seal, the protection against some atmospheric agents (water and dust) and the practical use of the extensible film. This machine is available in four models, according to the customers needs. |
|
| Arranged machine BOCEDI mod. FTB 419 allows to realize in an only station the incappucciamento and the termoretrazione of paletizzati cargos and the machine, not leaving from a termoretraibile films coil, form a cap and go to completely cover the paletizzato cargo that then will come termoretratto through given off warm air from a bush in stainless steel. The machine previews the possibility of being able to carry out the raising of the pallet during the process of termoretrazione to the aim to avoid the formation of miniskirts long the pallet in wood. |
|
The pallet stretch hooding machine enables the protection and stabilisation of palletized loads by the application of an elastic hood on 5 sides.
The hood is manufactured from a polyethylene tubular film with a gusset. It is cut to the length corresponding to the measured height of the pallet.
The hood is mechanically stretched to then be released over the load.
This method of hood application is particularly important because it does not use any heat source (the hood is not shrunk) and at a clearly lower operating cost than that of shrink wrapping. |
|
| This system, which carried out two operations, wrapping and shrinking, produces better waterproofing of the load and product conservation, which is ideal for long periods of storage under outside conditions, together with excellent stability that improves transportation and final presentation to the client. Format changeovers are fully automatic and production can reach 100 pallets/hour. Another advantage is the ease with which it can be adapted to existing lines. |
|
Pallet security with shrink-wrap film has proven its area of application for very heavy shipping units and multiple pallet handling.
The film cover, which becomes very stiff after shrinking, especially in the case of greater film-thicknesses, withstands considerable stress caused by accelerative forces. Möllers has developed film-shrinking technology with many advances since its beginnings and has gained the reputation of a technology leader in this field. |
|
Möllers automatic transverse stretch hooders use the security potential of the stretch film in the most effective way: The tubular film hood is radially stretched to the drawn width, with the resultant retractive force the film is tightened around the pallet load during positioning. Through the development of the patented High-Expander and Ultrastretch technologies Möllers was able to significantly improve the transverse stretch hood process.
With the highly extensible films used here considerably higher tensile strengths have been achieved, which significantly improve the load integrity and the bond between load and pallet compared to the stretch films originally used. Further advantages of the modern stretch process are the suitability of a single tubular film width for all usual pallet formats and the reduced film consumption of up to 30 %. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
