|
|
The glues hotmelts polyolefin reticulated joint, SikaMelt®-9181 and 9180 combine the performance of hotmelts PUR and a direct accession to the media to low surface tension.
SikaMelt®-9180 and 9181, hotmelts reticulated polyolefin, develop a good grip on materials oléfiniques non polar, such as the polypropylene (PP) and polyethylene (PE), and without any preparation of specific surface.
SikaMelt®-9180 and 9181 reticulated in contact with humidity contained in the air and present after hardening resistance high and an excellent resistance in aging and temperature. They are also more flexible than the traditional hotmelts polyolefin.
|
|
High Adhesive pumbable hot melt butyl mastics.
The product is hot melt and can be dispensed from a standard press or from a displacement drum pump.
Bu-tylene Drum 533 can be applied to any surface even at low temperatures.
The mastics are pasteurized to offer the most homogenous product between the various drums and production batches.
The mastics are vacuum manufactured and outgassed.
|
|
SikaMelt adhesives meet a very wide range of customer´s performance requirements.
Some typical applications are:
Adhesive tapes (one or double side) for construction industry, manufacturing industry or home use.
Self Adhesive "Hook and Loop" tapes
Transfer films
losure systems, self adhesive document bags, etc.
The SikaMelt UV PSA hotmelts combine the advantages of a hotmelt with adjustable properties of a crosslinking adhesive. These SikaMelt adhesives are mainly used for applications requiring maximum resistance to heat, plasticizers or chemicals. Typical applications are e.g. high-temperature labels.
|
|
OEM-Approved Solutions.
Sika's AutomotiveLine products provide best performance and
application for expert repair solutions.
Developed for professional users, our product range follows
the highest safety standards and offers OEM-approved systems.
Applications for:
Automotive Glass Replacement
SikaTack-MOVE IT
SikaTack-Drive (New Formulation)
Sikaflex-256
SikaTack-MOVE Transportation
Pre-treatment & auxilary materials
Sika AGR Installation Guide
Crash Body Repair
Sprayable Cavity Wax
Underbody Coating Protection
Anti-Stone Chip Coating
|
|
General Overview :
Hot melt adhesives, at room temperature, are one hundred percent solid, solvent-free thermoplastic adhesives products. When the adhesive is heated to 100º-175ºC (200º-350ºF), depending on adhesive chemistry, it becomes a liquid that is capable of quickly bonding paper, wood, plastics and metals.
|
|
| ... products without technical information |
| |
|
|
|
|
Pearson Packaging Systems' CS40-G Case Sealer is the newest addition to the Pearson product line. This fully-guarded case sealer is available in either mild or stainless steel construction. The CS40-G will top seal a wide-range of case sizes with hot melt glue at speeds up to 40 cases per minute.
Designed to Perform
Pearson's CS40-G is a fully automatic case sealer that includes a host of new and innovative features. By utilizing continuous motion and Pearson's innovative Compensating Independent Roller System™ (patented) and our Synchronous Drive System™, the CS40-G will consistently and reliably seal cases weighing up to 65lbs (29.5Kg). Need to go faster than 40 cases per minute? As the length of the case gets smaller the machine will seal cases even faster. Plus, with the newly designed, externally accessible adjustment points, changing over to different case sizes is easier and quicker than ever.
Reliability Plus
The Pearson CS40-G Case Sealer is engineered for safe, reliable performance. Like all Pearson machines, the CS40-G is constructed using only the highest quality components. Plus, each design is rigorously tested by our team of Six Sigma quality experts before any machine is shipped. Our manufacturing and quality control processes ensure reliability in the most demanding production environments.
Every CS40-G is supported by Pearson's team of service and technical support professionals who are available 24-hours a day, 7-days a week-worldwide.
|
|
HM-1500
Gluing machine Freestanding
Output: 1500 cartons/hour
The automatic carton closing machine HM-1500, freestanding version, is used to close cartons with hot-melt glue.
The machine receives the cartons filled with the product directly to the carton packer Serie MEGA. This machine is linked with conveyor belts.
The introduction, the carton spacer, the closing of the superior layer and the hot-melt glue application are automatic operations.
The machine has got a closer-layer system that is suitable to close rigid carton.
The intervention of the machine operator is only necessary in order to regulate the machine to take cartons of different sizes. It is a very simple operation which does not required skilled labour.
|
|
Hot Melt Glue Case Sealer - Wexxar WSH
The WSH is a fully automatic hot melt glue case sealer. Compact, versatile case sealers for top seal only or top and bottom seal. Stationary major flap folding and internal platen-compression system ensures perfectly butt-jointed and aligned flaps.
- Heavy duty compliant side drive belt transport through the machine: gentle to the product yet powerful enough for the heaviest loads
- Excellent accessibility for operation, set-up and service with convenient centrally mounted electrical controls and adjustability from both sides
- Interlocked safety guarding
- Corrosion resistant finished throughout
- Equipped with choice of Nordson or ITW Dynatec hot melt system
- Space saving compact footprint
- PLC (Programmable Logic Controls) equipped
|
|
| ... products without technical information |
| |
« HOT-MELT » BOX SEALER
Top-Bottom sealing for a range of box formats. Semi-automatic HM 900
or automatic HM 1200
STANDARD FEATURES OF HM 900 & HM 1200 SEALERS
- top/bottom sealing, using the « MELTON » hot melt system
- programming of adhesive strip lengths
- « pistol purge » function
- integrated box squaring function
- adjustable output rollers
|
|
|
|
|
|
The Pearson model CE70 Case Erector is essentially the same machine as the Pearson model CE60. However, we have designed the CE70 to fit into a smaller footprint to provide an alternative to those that do not have the space for an CE60.
Like the CE60, the CE70 sets the industry standard for case erecting at both medium and high-speeds. Its innovative design has been time-tested in packaging plants worldwide.
The CE70 can be configured many different ways. For medium speed applications you can configure your CE70 with various combinations of pneumatic and mechanical functions. Of course, if you want more speed and flexibility you can configure your CE70 with servo motors. The choice is yours.
Designed to Perform
Starting with a corrugated blank, the CE70 automatically erects and bottom seals a variety of case styles (see the CE70 Brochure for details.) Blanks are stacked on the 6-foot bed of the horizontal, high-capacity magazine. The case erector sends the blank through an automated folding and gluing process, where the flaps are perfectly sealed.
Reliability Plus
The Pearson CE70 Case Erector is engineered and manufactured for continuous, reliable performance. Every CE70 is supported by Pearson's team of service and technical support professionals who are available 24 hours a day, 7-days a week. Worldwide.
|
|
|
For high speed case erecting, choose the Model 450 case erector and sealer. This case former runs up to 50 cases per minute, providing square, well-sealed cases to high speed lines. Packed inside its compact frame is a workhorse machine, with a hefty 3 hp main drive motor that powers cases through erecting and sealing. With an easy-load case magazine, non-stop servo-controlled case sealing ram, computer-driven operation with touchscreen controls, this case erector is the top choice for speed, durability and reliability.
|
|
|
ITW Dynatec's Hot Melt Glue Applicators are air-operated or pump operated hot melt adhesive applicator assemblies. These glue applicator systems work with the adhesive supply unit and hot melt hose to automatically apply the adhesive to the product in a consistant and accurate mannor.
|
|
|
When it comes to hot melt glue supply units ITW Dynatec leads the industry. We manufacture a complete line of innovative adhesive supply units for low, medium and high-speed packaging operations. No matter what you need, Dynatec has the right hot melt glue supply unit to fit your needs.
|
|
Pattern control AS 50 AK
The »AS 50« is a distance-based pattern control for precise applications of adhesive at variable speeds. The control permits to activate up to four glue heads for the application of hotmelts and coldglues in programmable patterns. In addition the »AK«-version is featuring inputs for checking of the applied glue by means of infrared or coldglue sensors.
Pattern control AS 60 AK
The «AS 60» is an extendable pattern control of modular design. It is suitable for precise adhesive applications at all speeds with inspection of the glue application on hotmelt and coldglue systems.
|
|
|
VersaDrum bulk melters deliver precise application of hot melt adhesives, sealants and butyls. Modular, non-stick platens, available for 200-liter (55-gal) drums, melt adhesive on top surface of drum only, reducing thermal stress and protecting bonding characteristics. Elimination of dead spaces in hydraulic passages makes VersaDrum melters well-suited for reactive adhesives.
|
|
Diamond Head
The world’s first fully insulated application head for hotmelt, the new
SX Diamond application head
Save and safe !
Precise and long lasting
”SX-Diamond” the application head
The first insulated application head for hotmelt !
Durability and precision are reflected in „Diamond“
|
|
We asked our customers what they needed in the next generation of hot melt dispensing systems. And you told us.
The result is four lines of melters with features that give you top performance and productivity for your operation. Blue Series melters let you:
- Simplify daily operation.
- Reduce maintenance and associated costs.
- Speed up and ease installation.
- Connect and communicate with other melters and line machinery using standard industrial network protocols.
- Expand to meet future requirements.
- Minimize parts inventory with compatibility to previous-generation Nordson products.
Blue Series melters are the most carefully engineered and thoroughly tested products we have ever manufactured.
Best of all, Nordson Blue Series melters deliver the same superior performance and outstanding reliability that are the cornerstones of all Nordson products.
|
|
|
|
|
|
Large Tank Melters
The hotmelt application systems of the Jumbo and Premelt range are suitable for high melting capacities. They melt and feed thermoplastic adhesives of granular or block form.
Jumbo:
- Volume metering by means of gear pumps with closed loop control for precise glue application.
- Three Tank sizes of 55, 80 und 160 Litres
- Up to 4 gear pumps in 6 different sizes
- Dynamic drives ensure pulsation free application
- Simple operation by language independent operating field
System extensions
- Integrated pattern control for the precise control of up to 8 application heads
- System integration into the host machine by means of: Profibus, SNMP, Ethernet, CAN-Bus, ASI-Bus, RobaPAR
Options & accessories
- Quantity Control
- Electronic glue pressure control and regulation
- Granule feeder
Premelt
- To premelt thermoplastic adhesives for automatic filling of roller troughs and other adhesive containers with liquid hotmelt.
- Fix pump speed. The feeding quantity is controlled by the switch on time.
- Two tank sizes of 80 und 160 Litres
Options & accessories
- Trough heating kit
- Granule feeder
Robatech systems are featuring
- Full modularity and compatibility, system solutions by combining modules
- Few spare parts needed
- Field proven products, low maintenance cost, low life cycle cost
|
|
Applications:
Heating or heat-loss free transport of: oil, grease, wax, resin, glue, hotmelts, tar, paint, water, carbon dioxide, plastics, sealants, etc.
|
|
|
|
|
|
Nordson DuraBraid hot melt handgun hoses operate safely with improved durability and performance that reduces costs and downtime.
New rugged, wear-resistant braid covering exterior eliminates cumbersome corrugated wrap, retains flexibility and improves durability.
Hose covering withstands abrasion caused by friction or dragging of the hose on workbenches or other surfaces in handgun applications.
New gun cuff design that improves the durability of the AD31 hoses in aggressive high-movement applications.
Aramid insulation significantly improves chemical and moisture resistance.
Insulation does not melt or support combustion in the air, allowing hoses to retain flexibility and electrical mechanical properties beyond system operating temperatures.
Hose components are precision fabricated and calibrated prior to assembly, eliminating the need for temperature control calibration at installation.
Controlled watt-density heating element minimizes hot spot potential, reducing char.
Fits all Nordson handguns including AD-31 and AD-41
|
|
|
The HME-500 are particularly suitable for high production speeds with simultaneous high demands on accuracy and cleanliness. They combine the Baumer hhs competence from electromagnetically operated cold glue technology with the special features of hot-melt application.The HME guns are extremely quick switching, free from wear and tear and maintenance friendly. Their compact design without compressed air connection and solenoid gun allows the installation even in the smallest gaps. The use of high quality materials and ideal heat distribution not only guarantee long life but also optimum quality of the glue application.
|
|
|
|
|
|
Jetting Heads
The proven SX- and AX100 jetting heads are applying low- to medium viscose hotmels very precise and without stringing in form of dots or bead pattern. The pneumatically actuated applicator heads are characterized by their high reliability, a minimal need for maintenance and the modular structure.
Jetting Heads SX
* Small dimensions – ideal for smallest space conditions and box formats
* Fast switching – higher machine speeds
* Excellent cut-off – no tripping or stringing
* Integrated filter - prevents nozzle blocking
* Double acting jetting elements
* Long lifetime
Jetting Heads AX100
* Lasting and operationally safe
* Precise and reliable
* No drooling or stringing
* Proven modular design
* Exact temperature control
Jetting Heads AX300
* Medium to higher volume
* Thermoplastic Adhesives, PUR Hotmelts, Sealants, Butyl
* Nozzle diameter 1 … 3.5 mm
* Improved tear-off by means of auxiliary air nozzle (option)
Robatech systems are featuring
* Full modularity and compatibility, system solutions by combining modules
* Few spare parts needed
* Field proven products, low maintenance cost, low life cycle cost
* Swiss quality
|
|
|
|
|
|
Large Tank Melters
The hotmelt application systems of the Jumbo and Premelt range are suitable for high melting capacities. They melt and feed thermoplastic adhesives of granular or block form.
Jumbo:
- Volume metering by means of gear pumps with closed loop control for precise glue application.
- Three Tank sizes of 55, 80 und 160 Litres
- Up to 4 gear pumps in 6 different sizes
- Dynamic drives ensure pulsation free application
- Simple operation by language independent operating field
System extensions
- Integrated pattern control for the precise control of up to 8 application heads
- System integration into the host machine by means of: Profibus, SNMP, Ethernet, CAN-Bus, ASI-Bus, RobaPAR
Options & accessories
- Quantity Control
- Electronic glue pressure control and regulation
- Granule feeder
Premelt
- To premelt thermoplastic adhesives for automatic filling of roller troughs and other adhesive containers with liquid hotmelt.
- Fix pump speed. The feeding quantity is controlled by the switch on time.
- Two tank sizes of 80 und 160 Litres
Options & accessories
- Trough heating kit
- Granule feeder
Robatech systems are featuring
- Full modularity and compatibility, system solutions by combining modules
- Few spare parts needed
- Field proven products, low maintenance cost, low life cycle cost
|
|
|
|
|
|
ECLYSS 5-8 KG 2000-M SERIES PISTON PUMP
The ECLYSS 2000 - M Series of hot–melt applicators were designed for the application of adhesives and thermoplastic material with viscosity 500 and 30.000 Cps. The opportunity to choose between different tank sizes, combined with the option of mounting various microprocessors up to 4 channels with relative glue pattern control, renders the ECLYSS Series very versatile and suited for use in all fields of application, to satisfy the needs of the most demanding customers, where restricted dimensions or reduced glue quantities are necessary. The applicators are equipped with 5 and 8 kg tanks with heated ribs along the base of the tank to increase melting capacity and ease the flow of glue towards the bottom of the tank. All the parts touching the adhesive are coated with a special high temperature scratch-resistant PTFE non-stick surface, this prevents the glue from forming films that could be quickly transformed into carbonaceous residues, which cause premature wear and operational difficulties.Attention to design detail enables the glue filter to be easily reached and replaced. A combination of better adhesive distribution and the Preo progressive melt system prevents the nozzle from blocking due to adhesive residues.All ECLYSS Series applicators are equipped with either pneumatic or gear pumps. The pneumatic pump is a double-acting piston with a compression ratio of 13:1 and electric reversing system eliminating the pulsating effect of a single acting pump, and is recommended for adhesives up to 30,000cps.
|
|
| ... products without technical information |
| |
Gear Flow Meters for High Pressure Applications with Autoclave Connections up to 1,000 bar.
Specifications:
Measuring range: 0.02 up to 7 l/min
Repeatability: ±0.1 % of actual value
Linearity: ±0.5 % of actual value
Pressure: max. 1,000 bar
Temperature: max. +150 °C
Connections: Autoclave 3/8’’_8F-375-CX
Materials:
Housing: stainless steel as per DIN 1.4404
Wheel: stainless steel as per DIN 1.4122
Sealing: Viton
|
|
The pick-up system consists of one or two sensor units,
which are screwed into the cover of the VS flow meter
and of a downstream switched amplifier. This amplifier is
connected with the flow meter by means of a temperature
resistant cable and has to be installed outside the high
temperature area, where the ambient temperature should
not exceed 50°C (122°F).
|
|
|
The HME-500 are particularly suitable for high production speeds with simultaneous high demands on accuracy and cleanliness. They combine the Baumer hhs competence from electromagnetically operated cold glue technology with the special features of hot-melt application.The HME guns are extremely quick switching, free from wear and tear and maintenance friendly. Their compact design without compressed air connection and solenoid gun allows the installation even in the smallest gaps. The use of high quality materials and ideal heat distribution not only guarantee long life but also optimum quality of the glue application.
|
|
|
|
