|
|
* Text terminals are suitable for all the oppotunities; they're the right compromise between quality, economy and efficiency....
* Terminals equipped with graphic display provide a realistic appliance or plant interface. Machine supervision is made easier with these products.... |
|
Hardware
VGA 640x480 pixels, lighted, TFT colour graphics LCD display 10.4". (An enhanced TFT display is available as an option).
Resistive touch screen.
Optional PS/2 keyboard / keypad interface.
Ethernet options available. Supports TCP/IP, ModbusTM and other protocols.
4 Mbytes of flash memory and 16 Mbytes RAM.
EIA-232, -422 or -485 serial interface. Additional serial ports available.
RISC 92 MHz MIPS R3000 processor.
The terminal is industrially hardened to operate in rugged environments and meets NEMA-4 specifications for washing, ice and salt spray.
Modular form factor also available.
Software/Firmware·
QlarityTM - Object-based programming language makes application design easy for non-programmers whilst also having the capability of highly complex applications.
Design with pre-defined objects, edit current objects or design new objects for your application
Windows® programming environment - Qlarity Foundry is available for free.
Support for select partner hardware (distributed/remote I/O, motion control).
Keys around the display can be customised and your logo can be added to the legend. Custom hardware, firmware and software options are also available.
Contact us for a free trial demonstration terminal.
|
|
CIMO - monitor operator panels
There is a wide range of CIMO monitor operator panels
to suit every task and every budget.
CIMO monitor operator panel with LCD "TFT display"
Extremely slim design, outstanding colour brilliance,
excellent reading angle, front panel membrane-protected
against chemicals, new ergonomic design -
just a few of the impressive features of this top
product from Wöhrle.
CIMO operator panel with Windows CE - the latest
generation
This particularly high-quality range is the result of
the latest Wöhrle development and closes the gap
between text-oriented computer terminals and traditional
industrial PCs. The operating system is
Microsoft Windows CE. This means that it is possible
to operate all standard applications and utilise the
advantages of this platform, such as the Internet
facility.
TFT LC displays are provided for the operating panels
of the future, providing high resolution and excellent
colour.
These ultra-compact operator panels are setting the
standard.
CIMO operator panel is the economical version
An easy-to-use membrane keyboard and a graphic
black and white LC display make sure that control
and monitoring is cost-effective. A particularly economical
solution.
CIMO monitor operator panel with CRT
This range of equipment with monochrome cathode
ray tubes provides the most innovative and economical
solutions in the field of operating and monitoring
plant and machinery. Protected at the front to IP 65
they also withstand harsh environments.a |
|
Touch Screen Terminals bring ease-of-use and flexibility to the user. The touchscreen is as rugged as the keys on the keypad models. The Touch Screen Terminals on these pages represent a high value solution for many applications.
High Performance Touch Screen Terminals combine the ease-of-use of ESA's standard touchscreens, plus advanced functions to satisfy the requirements of any application.
Sophisticated graphic objects like potentiometers, sliders, dials and high resolution graphic displays are available. Multiple processors, one for the display and one for communications allow high-speed operation. |
|
WOP-iT Web Operating Panel
HMI Panel with additional programmable logic.
From 3,5" to 19" one programming software for all panels: WOP-iT Designer. |
|
The TIU's are not only Text displays but also have the capability for displaying a level of Graphics at Text Unit Prices.
Coupled with a vast number of Drivers, Popular Fieldbus Versions, Free OPC Server Software and Programming software we feel that the TIU offers amazing functionality for its price.
It is these features that has made the TIU a standard product for many PLC and Drives Companies and has allowed us to create many custom designs for OEM Customers.
If you have special requirements, do not hesitate to contact us.
The Operator Station line is designed for compatibility with a variety of manufacturers equipment, and it packs more intelligence through the newest technology via smaller pitch. What does this superior design mean to you? It allows you to increase productivity by increasing the functionality of your present equipment.
If you cannot find the equipment listed that you need to connect to,then contact us. We pride ourselves on the rapid development of Custom Protocols.
You can even perform control via our easy to use scripting language - that's the flexibility of the TIU.
There are many models in the TIU range from 2 Line Text to 12.1" Colour Touch all programmed by the same intuitive software - Cbreeze. |
|
Customised touch screen systems
Individual touch screen systems
Can be combined with other technologies (e.g. with membrane keyboards)
Customised electronic circuitry
|
|
The Motion Coordinator supports two open standards to allow connection to a broad range of third party operator interfaces. (HMIs)
The Modbus RTU protocol provides single point to point communication between the Motion Coordinator and a programmable keypad/display or touch-screen HMI. Implementation of the Modbus slave protocol is provided on serial port 1 for RS232 and port 2 for RS485. Baud rate and slave address can be set in the Trio BASIC program during serial port initialisation.
If the Ethernet daughter board P296 is fitted, then Modbus TCP can be selected to communicate with a suitable Ethernet equipped HMI.
Operator interfaces based on the Windows operating system can use the TrioPC Windows ActiveX component to allow either synchronous or asynchronous connection to the Motion Coordinator over USB or an Ethernet TCP link. One HMI can control multiple Motion coordinators over a local Ethernet network. In addition to the functionality provided, it is possible for a user to implement many other serial protocols using the simple but powerful input functions in Trio BASIC. Serial bytes can be handled either as ASCII characters or as binary data and protocols written include Siemens S39/64 and ANSI. Third party operator interfaces that have been interfaced to a Motion Coordinator using the Modbus protocol include: Automation Direct, Eason Technology, ESA, Exor R&D, Horner, Maple Systems, Pro-face and Total Control. |
|
Operator panels of series AS-Pxx:
The devices allow for simple operation, diagnosis and monitoring of your machines and systems. You can design the user interface according to your requirements.
An intuitive operator prompting via touch screen, assigned function
keys or a combination of both are possible. The use of insertable strips allows for individually labelling the keys.
Operator panels of series V606:
The convenient and cost-efficient operator panels for all systems,
which can be connected via modbus, are particularly suited for simple visualization tasks. In combination with our controllers, it provides you with a complete automation solution. |
|
| The LabVIEW HMI family of industrial panels provides three different hardware platforms so LabVIEW developers and programmers can deploy operator interfaces alongside a broad range of NI product platforms. The National Instruments FPT-1015 is a 15 in. flat-panel touch screen for all PXI embedded controllers and a flat-panel monitor for the NI Compact Vision System. The NI TPC-2006 is a 5.7 in. Windows CE touch panel computer programmed with LabVIEW PDA to create a remote terminal for headless real-time controllers such as Compact FieldPoint and CompactRIO. The NI PPC-2015 is a Pentium 4 PC that runs Windows XP and works with a wide range of I/O devices from National instruments; it connects via Ethernet to all NI PACs. To create an HMI for a broad range of distributed data the LabVIEW Datalogging and Supervisory Control (DSC) Module provides connectivity to NI hardware and third-party hardware through OPC, Modbus TCP/IP, and gateways for industrial communication protocols. |
|
The WindowsCE-based basic platform with the standard visualization tool TSwin .net
- Key or touch screen operation
- Based on Windows CE 5.0
- Ethernet communication
- USB interfaces
- Full-graphics displays
- Open platform allowing you to integrate your own software
- Optional diagnostics and telecontrol (TSDiag+)" |
|
| ... products without technical information |
| |
|
|
