|
|
The Univesal Hydraulic Tool Box
All sets include Enerpac pump, hose, cylinder, gauge and gauge adaptor
Lock-on or threaded connectors
Complete maintenance set for almost every maintenance application
|
|
for heavy loads up to 565 tons!
We are offering high pressure hydraulic tools and equipment like cylinders, pumps, shop equipment, bearing maintenance etc.
On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance!
|
|
Hydraulic block actuator used by mould-makers to produce the motion required for ejection inside moulds.
This compact actuator is made up of three single-part components :
- the body, with roller burnishing of bore
- the hardened piston-rod
- guide ring
The advantage of such a design is that it minimises replacement requirements and prevents leakage.
We can supply a wide range of standard double acting block actuators with diameters from 16 to 200mm. Special strokes can be produced on demand. A key groove is also present as standard which prevents cylinder movements when the pressure get over 160 bars. The whole range is available with standard seals (Nitrile) or with Viton seals for temperatures from 100° to 150°C.
|
|
pressure, mass, rate of charge, speed
cylinder 100
pressure 100 BARS
rate of charge 50%
speed 8000Kg
The diagrams indicates a maximum speed to accelerate the mass, of 0.44m/s
|
|
DOUBLE ACTING HYDRAULIC CYLINDERS
Capacity 10 Tons to 520 Tons, Stroke 254mm to 1219mm, Collet threads, plunger threads and base mounting holes for easy fixture on most models, Baked enamel finish for increased corrision resistance, Removable hardened saddles protect plunger during lifting and pressing, Built-in safety valve prevents accidental over-pressurization, CR-400 couples included on all models, Plunger wiper reduces contamination, extending cylinder life.
|
|
SINGLE ACTING HYDRAULIC CYLINDERS
Capacity 5 Tons to 95 Tons, Stroke 16mm to 260mm, Designed for use in all position, Heavy duty retun springs, Dust particles corrosion resistant painting, Plunger wiper reduces dust particles contamination for extending cylinder life, Collar threads, plunger threads and base mounting holes in many models for the suitability of most applications.
|
|
gripos-H - Automated clamping
Automated clamping
particularly suitable for series production with hydraulic force generation and for increased clamping forces of up to 70 kN with 250 bar hydraulic pressure.
gripos - clamping units for machining centers
are available in sizes 125 and 160 and for clamping ranges up to 439mm.
Easy conversion
gripos-H can be quickly be converted from a mechanical into a hydraulic vice by removing the mechanical cassette and replacing it with a hydraulic cylinder.
|
|
| ... products without technical information |
| |
Crimping connectors with the Stanley Hydraulic Tools CT Series crimpers is quick and easy. They are 5-10 times faster than hand-pumped tools and more than twice as fast as high pressure double acting crimpers.
The CT Crimpers require no booster or intensifier which means they can be operated directly from the hydraulic circuits already installed on your line trucks, or from a dedicated power unit, or from one of the STANLEY® lightweight, portable HP Power Units.
Swivel Design on all models provides 360° continuous rotation of the die head for easy alignment to give higher quality crimps.
1650 Models allow the use of the CT on almost any hydraulic system of at least 1,650 psi (114 bar). An accurate, built in relief valve ensures that at these system pressures and higher, a full die load is achieved preventing over-crimping.
|
|
System for crimping 10-1200 mm²
We have hydraulic crimp systems to compress connectors from 10 to 1200 mm². The system is built up of pumps and crimping heads that can be freely combined. There is a wide range of accessories for crimping, pre-rounding, cutting, etc.
|
|
Compact, self-contained and rapid electro-hydraulic tool for crimping connectors from 4 to 95 sqmm.
Ergonomic design and light weight enable crimping to be done one-handed.
Electronic speed control in the trigger.
Quick opening and closing head, rotatable 360°.
Adjustable stroke between 5 and 8 mm by rotation of graduated ring reducing the cycling number when crimping small sections.
Automatic release with an audible "click" when force of 35 kN is reached.
Piston return by release trigger.
Operates on 2 types of rechargeable battery :
- 12 V 2000 mAh battery delivered with the tool.
- battery with power load indicator as an option.
100 to 150 crimp operations possible before recharging.
Life :
1000 charges with standard 1 hour fast charger.
1500 charges with 15 min fast charger.
|
|
VAS 240 B
Portable electro-hydraulic with rechargeable battery.
180º swivel head with quick opening.
Safety pressure relief valve with audible discharge.
Interchangeable dies.
Supplied with metal storage case for machine and die holder (415 x 315 x 95 mm)
|
|
Battery powered crimping, cutting and universal tools
0,75 mm2 - 400 mm2
Battery powered crimping tools
Battery powered cutting tools
Battery powered universal tool
|
|
|
The HPA 400 offers the well established advantages of the dieless Novopress indent crimp in combination with a state of the art electro-hydraulic battery drive. With only 7.5 kg and exemplary ergonomics, our HPA 400 sets new standards in terms of operator convenience and safety in its class. Without any die change you crimp in only 9 sec. and up to 120 times per charge, various make of lugs or sleeves in CU and AL quality from 16 to 400 mm2. The 90° rotatable crimping head allows convenient crimping even in restricted working space. Delivered including box, charger and spare battery.
|
|
Manual, ergonomically designed, lightweight hydraulic tool for one-handed crimping of 4 to 95 sqmm connectors.
Quick opening and closing head, rotatable 360°.
Adjustable stroke between 5 and 8 mm by rotation of graduated ring, reducing the cycling number when crimping small sections.
Automatic release with an audible "click" when force of 35 kN is reached.
Return of piston by release trigger.
Possibility of checking force using a control gauge (option).
|
|
VAS 240C
Hydraulic head with a quick coupling to connect to a hydrahulic pumps (VAS 700, VAS-800 & VAS-900) with a maximum pressure of 700 bar.
Interchangeable dies.
Metal storage case (265x90x100mm) Available on request.
|
|
| ... products without technical information |
| |
* Hydromechanical system for index and locking functions
* Low maintenance
* Simple control system
* High speed indexing
* For high-volume production
|
|
|
DSTI's line of SE Series rotary unions are suitable for use in harsh environments. These compact assemblies have a maximum pressure rating of 510 bar, and are suitable for hydraulic oil, air, vacuum & coolant transfer. All of the SE Series rotary unions are available with integrated electrical slip rings for power & data transfer. The slip rings can be protected with a sealed aluminum cover if needed.
|
|
|
|