Clamping units

A screw type clamping mechanism provides long clamping stroke and firm clamping. Precision-ground jaw is perfect for clamping the workpiece on its finished surface. In ...

Clamping force: 500 N - 1,400 N

Can hold workpiece by a clamping bar with easy handle operation. Long thrusting stroke of a clamping bar allows clamping a recessed part. Note: Clamping bar is separately ...

Clamping force: 1.5 kN

New K5.3 Low Pressure Pneumatic Clamping Module Zero-point clamping system for set-up-time-optimized clamping. The compact size makes it ideal for light duty machining applications as ...

Clamping force: 5, 1.5 kN

For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations. Hardened Stainless Steel Hydraulic or Pneumatic Unlocking Cover and piston hardened Repeatability < 0.005mm (0.0002")

The 2382L model is manufactured by Magtrol, and is a high precision clamping unit that supports cable cross-section from 1 mm² to 1500 mm², which has a measurement length of 1000 mm. It is fitted with ...

Clamping force: 3.3 kN - 26.7 kN

... alloyed steel. Clamping disc steel. Version: Cam screw and clamping disc black oxidised. Note: These fixture clamps have a round washer that can be machined to suit the contour of the workpiece being ...

Clamping equipment for coordinate measuring machines 3D-Flex-Fix The universal clamping system for the CMM provides the solution for your two most challenging requirements: 1. Unlimited clamping ...

Clamping equipment for coordinate measuring machines Precision clamping device Clamp-Fix For the universal use on measuring machines | with quick jaw change system | 6 different standard jaws available ...

MODEL NOLength (min. - opt. - max.)Size2D3DPDF AK2-VT-SO 20 - 23 - 25Size------ BK2-VT-O 27 - 29 - 31Size------ BKS-VT-SO 27 - 29 - 31Size------

CTC MANUAL CLAMPING UNIT The CTC manual clamping unit was designed for rotating applications and is the only quick-clamping system available on the ...

SVC MANUAL CLAMPING UNIT The SVC range is used in static machining. With its short projecting length, SVC has more space for the workpiece and a larger flight radius. The built-in seal effectively ...

... manual clamping unit. The quick-change clamping system (QCS), designed especially for manual quick changes with HSK holders, is compatible with all HSK standards (A, B, E, F, T). It ...

Mechanical raw parts clamping units are used on 5- and multi-axis machines. You get a maximum degree of liberty due to the small dimension in combination with palletizing systems. A maximum clamping ...

Clamping force: 50 kN

The 4-point clamping unit of the zero-point-clamping system MZP allows a quick, simple and time-optimized positioning and clamping of workpieces or fixtures on the machine ...

Clamping force: 25, 55 N

... mechanical clamping unit has high holding- and pull-in/locking forces. The clamping unit can be positioned on the machine table and fastened via mechanical clamping ...

... workpieces and substrates with complex shapes can be mechanically machined. When clamping with ICE-VICE, workpieces are frozen with a water film on to the clamping surface. And that takes place without ...

... quick changeover times. KM® can provide throughput increases in the range of 30% to 50%. They are available as KM™ clamping units and KM™ Systems, both providing a range of options.

HYDRAULIC DUAL ARM CLAMP HFS 80-80 Hydraulic dual arm clamp HFS 80-80 S

Pneumatic work holding fixture & vertical toggle clamp Ideal for quick clamping in repetitive production operations The pneumatic toggle clamps offer an increased productivity by fully automatic hands free operation Direct ...

Clamping block 1 Features Material steel, gunmetal finish Versions for recirculating ball spindles Ø 12mm Nut pitches 2.5 and 5 mm Recirculating ball nuts are adjustable for no-play Clamping blocks ...

TVP Pneumatic vice 100, 160, 200, 250, 315

... place during machining. The flat edge is the same location as our original fixture clamp. It can be used where a stronger clamping surface is required. – Low profile – Made of mild steel for machinability

ROWA ITS ER-028471 Compatible Angle clamping unit Manual ITS Chuck on which angles can be set continuously from 0 to 90°. Application in EDM and WEDM. This chuck makes it easyer to machine lateral ...

The CTC manual clamping unit was designed for rotating applications and is the only quick-clamping system available on the market which is actuated via the coolant hole. The tool can ...

The Modig Universal Holding Fixture Chord Trimmer is used to clamp already bent aluminum extrusions in the process where the extrusion is manufactured in a gantry milling machine. The UHF Chord Trimmer consists of a number of sections ...

... This interface is therefore not only the first choice for lathes, but also for turning/milling centres. The Walter Capto™ clamping units can be used to switch over all common machines and revolvers to ...

... trapped swarf - No loss of pressure thanks to O-ring seal for reliable coolant transfer - No vibration thanks to stable clamping concept, ideal for any machining situation - Precise centring thanks to easily ...

Cap Clamping Jig CCJ series is a chuck with 100N capacity for clamping samples such as caps, connectors and more. Combine it with a force gauge and test stand to complete a testing system. Features - ...

Materials Tensile Attachment This series attachment is mainly used for the materials tensile test. It include hydraulic tensile fixture, wedge tensile fixture and so on. This series attachment is mainly used for the materials tensile ...

zinc plated; for use with No 12614 of same sizes; for separating and extracting ball bearings, roller bearings, bushes, wheels and other tightly fitting parts; applying uniform pulling force to the side bolts will gently separate ...

Clamping unit (Top Loading) For the assembly of FRIALEN XL Top Loading saddle parts without lower clamp for all pipe diameters in the appropriate range of dimensions with extra elastic pneumatic ...

The latest generation of ECL Anode Stem Connection Devices is based on an energy reserve concept. It ensures an appropriate clamping effort even in critical anode stem misalignment situations. These situations occur when ...