Level transmitters

172 companies | 731 products
Level sensors
  • Category
  • What’s new?
    Submit
  • Technology
    Submit
  • Output signal
    Submit
  • Size
    Submit
  • Protection level
    Submit
  • Application
    Submit
  • Other characteristics
    Submit
  • Domain
    Submit
displacer level transmitter - 294 bar | Modulevel® series

Modulevel® is a series of pneumatic displacer liquid level control from Magnetrol. It generates output signals in direct proportion to changes in liquid level. The series has a sleek modular design with a unique magnetic...

displacer level transmitter - Modulevel® E3

The Digital E3 Modulevel represents an advanced intrinsically safe, vertical in-line, two-wire instrument designed for detection and conversion of liquid level changes into a stable output signal. It's operation...

TDR guided wave radar level transmitter - ECLIPSE® 706

The Magnetrol® ECLIPSE Model 706 features an innovative angled, dual compartment enclosure (first used in 1998) and operates based on the proven guided wave radar (GWR) technology. It...

TDR guided wave radar level transmitter - ECLIPSE® 705

The Enhanced ECLIPSE Model 705 is a 24 VDC loop-powered transmitter. It uses guided wave radar (GWR) technology. This single transmitter is suitable for all probe types. It is reliable...

TDR guided wave radar level transmitter - Eclipse® Enhanced 705

The Enhanced ECLIPSE Model 705 guided wave radar transmitter is available with a 304 stainless steel housing designed specifically for use in hygienic applications. This instrument meets the needs and requirements...

{{productDetail[6020]}}
TDR guided wave radar level transmitter - Eclipse® Enhanced 705

The non-contact level sensors in the U-Series Madison are ultrasonic devices that are part of a complete series of advanced ultrasonic level measurement and standard devices. The use of these products continues to meet demanding applications...

radar level sensor - R Series

Madison is a company that offers a series of low-cost radar sensors, suitable for continuously measuring levels. This series of products come with a logical extension of the ultrasonic sensor series, especially in situations where application conditions...

float  level sensor / ship tank - C series

A magnet-containing float travels the length of the sensing range and interacts with a reed switch/resistor network. The reed switch/resistor network consists of evenly distributed reed switches over the sensing length and corresponding resistors...

hydrostatic level sensor - MAD4500 / MAD4510

The MAD 4500/4510 series is a hydrostatic level sensor that is capable of being submerged and are constructed in accordance to UL/cUL913 Class I, Division 1 and groups C and D. It is specifically used in naturally...

hydrostatic level sensor / for highly viscous applications - MAD4520

The MAD4520 by Madison Company is a Hydrostatic level transmitter designed for highly viscous operations. This specific equipment is used for monitoring viscous material and operation with turbulent...

{{productDetail[11780]}}
hydrostatic level sensor - TeleSensor

KING-GAGE® TeleSensor detects level by sensing hydrostatic pressure created by liquid depth. Acting on the force balance principle, a sensitive diaphragm is exposed to the liquid contents of the tank. Compressed air within the sensor creates a pneumatic pressure that balances the force of the liquid acting against the diaphragm. This diaphragm unit...

radar level transmitter - LevelWAV

Time Domain Reflectometry (TDR) technology continuously measures the levels, volume or ullage process temperatures that range up to 200°C. King-gage® LevelWav guided wave radar level transmitter will offer measurements of liquids and...

hydrostatic level transmitter - ES2

The ES2 transmitters from King-Gage provide liquid level measurement for inventory monitoring. The unit is applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic...

hydrostatic level sensor - AcraSensor

KING-GAGE® AcraSensor unit diagnoses level by sensing pressure owing to fluid profundity and its pneumatic force balance grid system remains unfazed by drift or temperature impacts. These sensors are specifically perfect for a variety of hygienic applications...

{{productDetail[11788]}}
float  level transmitter - -30 °C ... +120 °C, min. 750 kg/m³, max. 40 bar | MG 01

The MG 01 from Besta, is a level transmitter made from stainless steel. It comes...

float  level transmitter - -30 °C ... +120 °C, min. 750 kg/m³, max. 40 bar | MG 02

The MG 02 Level Transmitter is a transducer made of stainless steel. It is built with...

float  level transmitter - -30 ... +80 °C, min. 750 kg/m³, max. 40 bar | MG 04

The MG 04 series from BESTA is a level transmitter that is especially engineered with stainless...

float  level transmitter - -10 ... +80 °C, min. 500 kg/m³, max. 3 bar | MG 05

The MG 01 Level Transmitter is manufactured with a housing and stainless steel materials....

{{productDetail[11841]}}
capacitive level transmitter / for liquids - FKE

The FKE is a capacitance level transmitter for liquids, manufactured by Georgin S.A. It offers its SMART transmitter including 4-20 mA DC + HART protocol. This can operate...

{{productDetail[8572]}}
capacitive level sensor / for solids and liquids - KFS / KFA / KFX

RECHNER Captive Level Measurement Systems operate on the three-electrode principal.An additional electrode (here the container) serves as a counter-electrode to the probe electrodes. Thus it makes it essential...

capacitive level transmitter / for solids and liquids - KFS / KFA / KFX

The capacitive filling level system follows the three-electrode principle and can act as a counter-electrode to the probe electrodes. This system requires the container to be made...

{{productDetail[9277]}}
hydrostatic level transmitter - max. 25 bar | STLV

The STLV model engineered by Nuova Fima, is a hydrostatic level transmitter that features...

{{productDetail[14044]}}
hydrostatic level sensor / disconnectable - LMP 308i series


The separable precision stainless steel probe LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital conver-ter. Consequently it is possible...

hydrostatic level sensor / for highly viscous applications / disconnectable - HART® | LMK 358H series

The LMK 358 H is manufactured by BD sensors, and is a submersible probe that is suitable for measuring level in waste water, waste and higher viscosity media....

hydrostatic level sensor / for highly viscous applications - HART® | LMK 382H series

The BD Sensors LMK 382 H series is an array of hydrostatic level transmitter suitable for highly viscous applications such as measuring wastewater, waste and higher viscosity...

hydrostatic level sensor / for marine applications - HART® | LMK 458H series

LMK 458H is a hydrostatic probe that has been developed for measuring the level in service and storage tanks, being a consequence of the certification issued by Germanischer Lloyd, for offshore and shipbuilding applications....

hydrostatic level sensor - LMP 307

The Hydrostatic Level Sensor Series LMP 307 manufactured by BD|SENSORS GmbH, is made of stainless steel probe and it is created for continuous...

{{productDetail[14047]}}
hydrostatic level transmitter / with display - max. 210 m | LevelMate III

The LevelMateII Level system from Ametek is a hydrostatic level transmitter utilizes a standard stainless steel transmitter. It contains a range of perforations In the inferior part of the unit that protects...

hydrostatic level sensor / for highly viscous applications - max. 60 psi, max. 138 ft | 675

The Model 675 is a hydrostatic level transmitter designed for highly viscous applications. It is commonly used in operations where slurry...

hydrostatic level sensor / cost-effective - max. 300 psi, -25 °C ... +60 °C | 375

The 375 model from Metek is a submersible level transmitter which is specifically developed to...

hydrostatic level transmitter / inherent safety - max. 20 bar, max. 211 m | 575 series

The Model 575 is a series of intrinsically safe hydrostatic level transmitter from Ametek that is capable of handling up to 20 bar of pressure at a distance that reaches up...

hydrostatic level sensor / cost-effective - max. 20 bar, max. 211 m | SDT

The Model SDT Transducer is designed to signify and display liquid levels. It functions by continuously...

{{productDetail[14272]}}
hydrostatic level sensor / for corrosive environment - CTE9000 / CTE8000 / KTE8000 / KTE2000

First Sensor presents CTE / CTU / CTW9000...CS hydrostatic liquid level sensors. These sensors are submersible. The provide excellent media compatibility with various industrial fluids. Pressure sensor elements are either made of piezoresistive ceramic or stainless steel. The level transmitters...

capacitive level sensor / non-contact - CLC, CLW

First sensor is a dominant provider of customized detectors for extremely authorized necessities. As per our customer feedback, we have assembled sensors for OPTO and MEMS in varied markets. First sensor developers in-house along the value...

{{productDetail[7107]}}
radar level transmitter / pulse burst - 25 GHz  ±3 mm  | PiloTREK

The PiloTrek Level Transmitters from Nivelco are engineered with a 40 mm horn antenna. These units are ideally used for applications that are concerned with fast and precise measurement...

TDR guided wave radar level transmitter - max. 24 m, max. 40 bar | MicroTREK

The MicroTREK (Guided Microwave) LEVEL TRANSMITTERS are built with two-wire TDR Technology, plastic coated stainless-steel probes (PFA, FEP, PP), aluminium and plastic housing. Various probes are also available in explosion proof models. The device offers digital communication...

ultrasonic level transmitter / for liquids - 0.2 - 25 m, 0.3 - 3 bar | EchoTREK

This compact transmitter may have 2 or 4 wires. It meters levels without contact with its 5° beam angle. It processes signals through the QUEST+ software. The 2-wired...

ultrasonic level transmitter / solid - 0.6 - 60 m, 0.7 - 1.1 bar | EchoTREK

The Echo TREK, manufactured by Nivelco®, is an ultrasonic 3/4-wire compact transmitters which offers the best measurement in a non-contact simple package liquid level metering...

ultrasonic level transmitter / for liquids - 0.2 - 15 m, 0.3 - 3 bar |  EasyTREK

The EasyTREK is an ultrasonic level transmitter for liquids, manufactured by NIVELCO. It is equipped with 2 or 4-wire compact transmitter, 5° beam angle and signal processing through...

{{productDetail[7110]}}
admittance RF level transmitter - Universal II

AMETEK Drexelbrook Universal II is an admittance (RF) level transmitter, that can be calibrated...

ultrasonic level transmitter - max. 30 ft | USonic

Drexelbrook's USonic is a US Series transmitter that utilizes US-XX Series Electronics technology....

admittance RF level transmitter - max. 800 ft | Check Well

The Check Well is an admittance RF level transmitter that is generally used to measure...

TDR guided wave radar level sensor - TXXXX series

The TXXXX Series of impulse-guided wave radars is manufactured by AMETEK Drexelbrook. They are TDR or Time Domain Reflectometry guided wave radar level sensors.

The unit is designed for accurate measurement of total...

magnetostrictive level sensor - max. 40 ft | DM330

The DM330 is a two-wire loop powered intrinsically safe sensor with a configurable signal output...

{{productDetail[14122]}}
magnetostrictive level sensor - max. 40 ft | DM330

The Hydrostatic Level Transmitter can hold intense chemical and mechanical loads and are not delicate to electromagnetic...

{{productDetail[12728]}}
level sensor - IP65 / IP66, ATEX | MBA 369

The MBA 369 is a weight and cable level measurement sensor that is commonly used...

radar level sensor / cost-effective - MBA 300

The MBA 300 model, engineered by MBA Instruments, is a cost-efficient radar level sensor that features a continuous...

radar level sensor / for bulk materials - max. 75 m | MBA 400

The MBA400 Radar is a continuous and contact free radar beam with slim. It measures filling levels and comes in slim silos....

{{productDetail[58208]}}
float  level sensor / with analog output / with temperature sensors - AST

This product is a float level sensor with temperature sensor and analog...

float  level sensor / with analog output / with temperature sensors - AST-50

The AST-50, manufactured by Engler, is a float that is an analog level, temperature...

float  level sensor / with analog output / with temperature sensors - 2 x (0 - 10 V) | KS2010

The KS2010 Series manufactured by ENGLER is an analogue level and temperature measuring equipment....

magnetostrictive level sensor - NAMW-40

Showcasing a 0.1-mm resolution rate, Engler's NAMW-40 Magnetostrictive Level Sensor also sports an extensive...

{{productDetail[69367]}}
capacitive level sensor / fuel tank - 700 - 1 500 mm | LLS-20160

There are several applications supported by this product, ranging from road vehicles and buses to diesel generators, heavy equipment and construction machines. This digital fuel level sensor is type LLS-20160, being dedicated...

capacitive level sensor / fuel tank - 1500 - 6 000 mm | LLS-20230

The LLS 20230 fuel level sensor can be used for storing fuels it can act as a storage fuel tank, mobile fuel tank, and road tanker. It is made to be connected...

capacitive level sensor / fuel tank - 700 - 1 500 mm | LLS-AF-20310

The LLS-AF 20310 Fuel Level Sensor can be used in road cars, buses, heavy devices, diesel generator, and construction machinery. It is made to be connected...

{{productDetail[62147]}}
hydrostatic level sensor / for corrosive environment - max. 10 mH2O | LV35

BCM presents model LV35 submersible liquid level transmitter. It uses the silicon piezoresistive technology. It has been developed for applications where alkali corrosive pressure media is used for producing...

hydrostatic level transmitter - max. 200 mH2O | LV36

The LV36 liquid level transmitter is composed of a BCM piezoresistive pressure sensor and signal conditioning electronics, which are fitted to a stainless steel housing. The unit is suitable for applications...

hydrostatic level transmitter / with surge arrester - max. 200 mH2O | LV39

The LV39 model is manufactured by BCM Sensor, and is a submersible liquid level transmitter that is intended for gauge pressure measurements. It is made up from 316L grade stainless steel with...

hydrostatic level transmitter / with display - LV37

The LV37 is a liquid-level transmitter that is used for gauge pressure application in liquid level measurement. This product is specifically made from a stainless steel 316L, that has a rigid and...

hydrostatic level transmitter / flange-mount - LV38

LV38 liquid level transmitters use BCM piezoresistive technology and are ideal for liquid level measurement in viscous and corrosive pressure media, such as fluids or fluids...

{{productDetail[56103]}}
hydrostatic level sensor - MP series

The MP series, manufactured by Rittmeyer, are pressure transmitters. They are ideally...

{{productDetail[54476]}}
hydrostatic level sensor / ship tank - 4000 mm | OCIO RS485, GSM

The OCIO level meter is an electronic device which facilitates control and measurement of the tank levels. It is suitable for fluids which are not explosive, not flammable, compatible with the materials of the probe and...

hydrostatic level transmitter - 100 mtH2O, 100 °C | 26Y

The 26Y is a series submersible level transmitters from Riels that are suitable for use with inert and corrosive liquids. They are used as inexpensive measuring device for water levels that needs high accuracy....

capacitive level transmitter / for liquids - max. 300 mbar, Aisi 316L | 46X

The 46X Submersible Level Transmitters from Riels are commonly used for level measurement of liquids and dense water. It combines the ceramic measuring cell for low pressure ranges...

hydrostatic level transmitter - 300 mtH2O, RS485, 80 °C | 36XW

The 36XW by Riels Instruments is a hydrostatic level transmitter which is designed for measuring water levels on operations which requires high precision performance. It comes with an advanced technology...

hydrostatic level transmitter - 100 mtH2O, 100 °C | 36XKY

The 36XKY is a series of level transmitters from Riels that has a wide sensing membrane suitable for applications in pumping water stations. It operates with piezoresistive silicon measurement technology and unique microprocessor-based...

{{productDetail[70609]}}
ultrasonic level transmitter - max. 40 m | Blackbox 130

The Blackbox 130 is a compact and cost-saving smart controller that measures levels of solids,...

ultrasonic level transmitter - max. 40 m | Blackbox 133

The Blackbox 133 from Pulsar features a two control or alarm relays with a smooth voltage output of 0 to...

ultrasonic level transmitter - max. 40 m | Blackbox 134

The Pulsar Blackbox 134 Level Measurement with Modbus RTU Digital Communications, a heavy-duty yet cost-efficient intelligent controller, is designed to offer...

ultrasonic level transmitter - max. 40 m | Blackbox 135

Blackbox 135 adds an RS485 port for Profibus DP V0 or V1 digital communications to the Blackbox existing features including two control or alarm relays, with simple 0-5V output proportional to level to...

ultrasonic level transmitter - Blackbox 136

The Blackbox 136 CSO is specially designed to provide a modern finish specifically intended for several applications and purposes. It is considered as a high quality system...

{{productDetail[25501]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation