|
|
Sensy designs and produces a broad range of standard and custom made load pin (clevis pin) for capacities from 0.25t (2.5kN) till 1500t (15MN) and more on request.
Force measurement on hydraulic jacks, load limitation for hoisting equipments and winches, force control on brake system, deported torque control on motors,...
|
|
Magtrol Load Measuring Pins are temperature-compensated transducers used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load.
Features:
From 2.5 to 1250 kN (0.28 to 140 tons)
Admissible overload: 150% of the nominal load
Overload at rupture: 350% to 700% of nominal load (according to the model)
Pin made of high resistance stainless steel.
Insensitive to external mechanical and chemical effects (strain gauges inside the pin)
Ideal for use in hostile environments
Rugged and tight construction; maintenance-free
For new or refitted installations
ISO 9001 Certified
|
|
|
|
|
|
SENSY is one of the most experimented companies in the load limitation for hoisting devices business, because of its 20 years experience in this field of activity. This is why we offer one of the largest product range on the market with strain gauge technology load cells and load pins, electronic load limiters and displays and also dynamometric shackles and wedge sockets.
When it goes about setting in conformity a hoisting equipment, you think about load limitation equipment for production or expedition department overhead cranes (EOT), harbour cranes, … We talk then about heavy loads, Crane classification (FEM) and big investments. Men think that hoisting devices for smaller capacities do not deserve such investment. Therefore, we have developed a range of load cells and electronic load limiters for lower capacities hoisting equipments. We talk about load cells with fast and easy implementation combined with load limitation electronic with 1 or 3 set points. A cost effective solution for equipping your low and medium capacity overhead crane.
|
|
Load measuring pin customized redundant
Typ M-0026-1-RE
Output: DMS x 2
Options:
Pre-amplifier 4-20 mA built in with plug connection
|
|
LA - PRECISION DUAL SHEAR LOAD PIN
APPLICATIONS
- Tension/Compression Measurements
- Clevis Pin/Shackle Loading
- Crane, Lifting & Winch System
- Mooring Line Tension Measurements
- Sprockets & Pulley Axle
FEATURES
- 5,000 to 200,000 lbs. Capacities
- Dual Shear Beam Technology
- Stainless Steel Construction
- Application Versatility
- 0.5% Accuracy Class
- Excellent Overall Performance
- IP67 Environmental Sealing
- Non-Standard Configurations
- Two Year Warranty
|
|
|
Load Pin Transducers (also known as Shear Pin Sensors) measure loads using a strain gage element sensitive to shear loads. Using a laboratory calibration traceable to NIST, shear strain is related to load. Typical sizes range from 5/8 inch to 3.5 inch diameter. Two-component output is available for applications where loads are in the X & Y planes.
|
|
The load pin works according to the strength measuring principle on a transverse basis to the longitudinal axis.
The SB-32 was developed especially for strength measuring at traversing wheels, can be, however, used also at pulleys, cranes, lifts or other mechanical force measurement on working platforms.
It is executed as a stretching bolt with two clipping chases. Crossways chase is it fixed or the like on a side by a diameter extension and on the other side by two for the mounting device of locking plates against slipping axially. Other safety device for example bags drillings, on enquiry. A side is flat to the protection from twisting and to the identification of the strength introduction.
|
|
| ... products without technical information |
| |
|
|
