Weigh modules

... of this modern automation system, such as integral communication, diagnostics and configuration tools. The SIWAREX FTC weighing module is the optimum solution wherever high demands are placed on continuous ...

... signal preprocessing, directly in the periphery module. The full bridge is fed by the module itself – no additional hardware is needed. Four-wire as well as six-wire sensors are directly connected to ...

SIWAREX WP521 ST and WP522 ST are technology modules for the SIMATIC S7-1500 advanced controller family: SIWAREX WP521 ST is the single channel option for the set-up of one scale and SIWAREX WP522 ST is the two-channel ...

Have you faced these problems of production-line weighing systems? - Weighing is slow. - Instruments take up space. - Weighing sensors do not last long. - Display units are redundant. - Cabling is complex and expensive. The AD-4212C, ...

The AD-4212B Series are weighing sensors developed for highly precise measurement and control applications on production lines. By employing A&Ds unique Super Hybrid Sensor (SHS), the AD-4212B Series enables fast and stable weighing with ...

Fast stabilization (0.8 sec. at 1 mg, 1.1 sec. at 0.1 mg) Slim separate weighing sensor unit (80 mm width) for compact setups Protection mechanism against vertical and transverse overloading due to actuator malfunctions, etc. Adjustable ...

The U2A from HBM is a load cell specially designed for weighing medium and heavy weight suspended tanks, and band scales. Its rugged, EMC approved stainless steel construction is resistant to explosion, and corrosion ...

... supplies HLCM weighing modules that come in maximum capacities of 220 kg, 550 kg, 1.1 t, 1.76 t, 2.0 t, 2.2 t and 4.4 t. They are specially designed for tank weighing applications and are well equipped ...

HBM Z6/M weighing module has been specifically designed for tank weighing applications. Based on the needs, it can handle maximum capacities of 50 kg/200 kg/500 kg. Z6/M is fitted using lateral stay rods. ...

The weighing module Novego® was specifically developed to meet the increasingly stringent requirements of the food industry. This hygienic all-in-one solution boasts a range of innovative properties to ...

More hygiene for your process vessel weighing. The innovative weighing module is the solution for hygienic applications - designed by EHEDG guidelines. Preassembled weighing module, ...

... delivers incomparable value for money. Weighing capacity up to 7 kg; belt speed up to 20 m/min (approximately 66 ft/min). weighing module with feed belts for static weighing and controlling for a ...

... precision of a measurement it is recommended to build the module into the customer's device (e.g. draft shield), thus limiting ambient conditions influence. Power supplier for MAS weighing module ...

MAS.1 standard series of high resolution electromagnetic modules is intended to be incorporated into customer’s weighing systems. Operation of the MAS.1 high resolution electromagnetic module is based ...

... high resolution module is based on an electromagnetic digital converter. The module is designed to be incorporated into customer’s weighing systems. Compact design and inbuilt electronics ensure great ...

... hopper or tank weighing applications Material: Galvanised load module; load cell optionally made of K30N stainless steel or K30S alloyed steel Nominal load: 500 kg - 1000 kg Load ...

... hopper or tank weighing applications Material: Stainless steel or alloyed steel Nominal load: 5 kg - 250 kg Load cell hermetically sealed Particularly robust for long-term use in industrial applications ...

The stainless steel weighing module K24N-MZ with integrated wishbone was specially designed for the weighing of hoppers and tanks. The construction, with a wishbone and an integrated lifting device ...

-Between 200 kg and 2000 kg -Absorbs shocks and vibrations with rubber adaptor -Galvanize steel -Optional stainless steel -Tank, hopper and bunker weighings -Floor scales -Conveyor weighing systems -Weighing applications in OEM machines

-Between 200 kg and 2000 kg -Absorbs shocks and vibrations with rubber adaptor -Flange connection structure -Galvanize steel -Optional top welding plate -Optional stainless steel -Tank, hopper and bunker weighings -Floor scales -Conveyor ...

-Between 200 kg and 2000 kg -Safety use with stoper structure -Absorbs shocks and vibrations with rubber adaptor -Galvanize steel /Opt. stainless steel Tank, hopper and bunker weighings -Floor scales -Dynamic weighing application -Weighing ...

... besides minimizing load cell damage and plant down-time. Each features self contained weigh point with both uplift and side restraint built-in that can be simply installed by bolting the Accupoint Weigh ...

The PT9000TWA MOdel is a weigh module developed by PT. It is built suitable for tanks, reactors, and silos. The system is a fully configured weighing assembly with medium to high capacity. It is engineered ...

Designed for road and rail scales the PT9010WA has a capacity from 10t to 50t to cater to small footprint and low profile. The central loading design through ball free motion makes it less sensitive to side loads. The unit is constructed ...

The GPA NF by Cachapuz Bilanciai Group is a Stainless steel weigh module which is designed for a wide range of weighing applications. For this specific model, it comes with a standard structure made of ...

The GPA NT weighing kit from Cachapuz has a load cell model NTI. It has a solid stainless steel construction with good protection against overloading.

The GPA T, manufactured by Cahcapuz, is a weighing kit that has been constructed out of galvanized steel. It has a load cell model TI and mechanical accessories for settling and/or thermal expansion equalization.

Weigh Module Compression Load Cell (5t ~ 15t) Nickel Plated Alloy Steel 2mV/V, IP67 Specially designed for midium size truck scales in harsh environments. The effective intégration ...

Weigh Module Specially designed for hopper, bin and tank (100kg ~ 5t) - Self centering design for accurate weighing. - Self checking and overlift protection structure for no check rods needed. - ...

Using sensors, the pressure of the pneumatic suspension system is accurately measured. With this system, any change on the air pressure is electronically detected, and results in an indication -in kg- in the equipment installed at the ...

... vertical overload is easily achieved by setting the adjustable stop mounted in the baseplate. When combined with the T66 load cell (ordered separately) it is an ideal solution for high accuracy weighing of hoppers, ...

... provides a simple way to apply a tensile load to a T66 bending beam load cell, allowing tension measurement from 10kg up to 250kg load cell capacity with OIML C3 approval and IP68/IP69K ingress protection. The mounting ...

... and faster using this simple innovative design. It combines a 316 stainless steel weighing assembly with an OIML approved load cell (bending beam or shear beam) protected to IP68 and IP69K, an ideal combination for ...

The Build-Up-Systems with multiple force transducers allow the calibration of large forces with high accuracy. Systems of three and nine force transducers are common, other systems are possible. Integrated ...

Designed for integration in a control cabinet on top hat rail The weighing module WM-3 can be comfortably programmed using a PC tool. Data can be output to SPS, PLS, or ERP systems easily using the ports. ...

... weighbridge the advantage of reliable POWERCELL® PDX® technology with a Model VKR211 load cell conversion kit. This easy-to-install kit upgrades a weighbridge by using POWERCELL PDX load cells to replace ...

Next Generation in Automated Weighing Check WMF weigh module: With only 25 mm/ 1 inch width, fully integrated electronic and Industrial Ethernet interface, it can be used in most challenging applications ...

Levermount is the most recent and innovative mechanical system of load cells assembly for industrial weighing systems IP68/69 Stainless steel load cells, OIML certified C3 Its basis with three fixing ...

FEATURES • Capacity range: 500, 1.25K, 2.5K, 5K, and 10K lb (227, 567, 1.13K, 2.27K, and 4.5K kg) • High-grade, welded, stainless-steel load beams (1.25K to 10K lb) • Sealed to IP67 standards for washdown service • Fixed, full-floating, ...

The 9102 self-aligning silo mount, combined with the 9102 load cell family, provides high accuracy weighing assemblies suitable for process control, batch weighing, silo/hopper, and belt scale applications. Model 9102 ...

... cell. It features an all stainless steel construction and is available in kits of three or four load cells. Ideal Load Cell to weigh tanks, hoppers and silos The 220 is specifically designed for the ...

Fast precision weighing system Ideal weighing sensor to place on the line of production Description • High resolution and fast response in 0.5 seconds. • With dustproof and splashproof IP-65 protection. • Comparator output (Hi-Ok-Lo) ...

FEATURES Manufactured in stainless steel with IP67 protection. Mounting Kit in Stainless Steel or Zinc Steel. Hostile environmental cable. Mounting compatibility. APPLICATIONS High Capacity and Silos.

Capacity 30 – 50 – 75 – 100 – 150 – 200 – 250 – 300 KgUp to 6000 divisions OIML-R60Measuring element from steel alloyProtected against corrosion by nickel-plated treatmentAvailable in stainless steelProtected against humidity IP-67Avalable ...

... RESISTANCE TO LATERAL FORCES - BOLTS FOR MAINTAINING THE RAISED POSITION, FOR EASY INSTALLMENT AND/OR SUBSTITUTION OF THE LOAD CELL - SELF-CENTERING CONNECTION SEGMENT BETWEEN LOWER AND UPPER PLATES.

... package or as your request Delivery Detail: within 3-7 days after the payment Specifications: 1) Proprietary production load cell 2) higher measurement repeatability 3) SCS electronic truck scale’s key parts ...