- Materials - Tools - Components >
- Lubrication >
- Lubricating lubricant
Lubricating lubricants
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Viscosity: 0.000016, 0.000023 m²/s
Flash point: 180, 200 °C
... operators health due to almost no carcinogenic compounds as polycyclic aromatic hydrocarbons present in the oil. Reduced oil mists and less product consumption through evaporation, due to low levels of volatility. Supreme ...
TotalEnergies Lubrifiants
Operating temperature: -3 °C - 240 °C
... biodegradable-based neat cutting lubricant VALONA MS 7010 BIO is a vegetable oil cutting oil designed for turning, drilling, tapping, grinding and honing on ferrous and non ferrous metals. VALONA ...
TotalEnergies Lubrifiants
Pour point: -27, -24, -18 °C
Flash point: 286, 292, 300 °C
... mineral lubricants, specially developed to improve anti-wear and corrosion protection of your highly valued piston aviation engine. These oils already contain an anti-wear additive similar to Textron Lycoming LW 16702. New ...
TotalEnergies Lubrifiants
Operating temperature: -30 °C - 120 °C
SKF LGMT 2 is mineral oil based, lithium soap thickened grease with excellent thermal stability within its operating temperature range. This premium quality, general purpose grease is suitable for a wide range of industrial ...
SKF Maintenance,Lubrication and Power Transmission
Operating temperature: -30 °C - 120 °C
SKF LGMT 3 is mineral oil based, lithium soap thickened grease. This premium quality, general purpose grease is suitable for a wide range of industrial and automotive applications requiring stiff grease. • Excellent ...
SKF Maintenance,Lubrication and Power Transmission
Operating temperature: -20 °C - 110 °C
SKF LGEP 2 is mineral oil based, lithium soap thickened grease with extreme pressure additives. This grease provides good lubrication in general applications subjected to harsh conditions and vibrations. • ...
SKF Maintenance,Lubrication and Power Transmission
Flash point: 260 °C
... pump oil has excellent viscosity characteristics. Its good chemical resistance, low vapor pressure as well as its better stability when pumping oxidants such as acid and alkaline vapors, makes it superior compared to ...
Operating temperature: -20 °C - 150 °C
Flash point: 0 °C
ITW Spraytec
ITW Spraytec
Operating temperature: -20 °C - 150 °C
ITW Spraytec
Operating temperature: 0 °C - 149 °C
... Premium All-Purpose Industrial Grease protects against rust, corrosion and wear. Applications: This NLGI (National Lubrication Grease Institute) No. 2 extreme-pressure grease is ideal for: On- and off-road applications Wheel ...
TIMKEN
Operating temperature: 40 °C
Viscosity: 0.000054 m²/s
Pour point: -15 °C
UNIVERSELLE 55 SC is a multi-purpose oil, free of organo-chlorinated additives, suitable for cold deformation, tapping and lubrication of machine tool parts. PACKAGING DRUM 208 L, IBC 888 KG, BULK
MOTUL TECH
Operating temperature: 40 °C
Viscosity: 0.000145 m²/s
Pour point: -12 °C
UNIVERSELLE 150 SC is a multi-purpose oil, free of organo-chlorinated additives, suitable for cold forming, tapping and lubrication of machine tool parts. PACKAG INGIBC 1000 L, BULK
MOTUL TECH
Operating temperature: 40 °C
Viscosity: 0.00009 m²/s
Pour point: -12 °C
UNIVERSELLE 90 SC is multi-purpose oil, free of organo-chlorinated additives, suitable for cold deformation, tapping and lubrication of machine tool parts. PACKAGING DRUM 208 L, IBC 1000 L, BULK
MOTUL TECH
Operating temperature: -40 °C - 204 °C
Flash point: 300 °C
... nonmelting lubricant that will not carbonize and will remain serviceable at temperatures from -40° to 204°C (-40° to 400°F) and exhibits a very low vapor pressure. Applications Rubber & elastomer lubrication Performance ...
Dow Corning
Operating temperature: -50 °C - 200 °C
... water-repellent properties, good thermal conductivity and is a reasonable mechanical lubricant. This electrical insulating compound can be used as a seal and lubricant for various equipment such as cable ...
... milling, drilling up to grinding, superfinishing and honing. A complete range of neat oils, based on highly refined base oil and proven technology formulated without chlorinated paraffin, meets metalworking requirement ...
CASTROL Industrial
WD-40 Specialist® Bike Wet Chain Lube is a high-performance lubricant specifically formulated for muddy & extreme conditions. The Wet Chain Lube provides a durable coating that helps repel water and mud, and helps protect ...
WD-40
Operating temperature: 160 °C
AMBLYGON TA 30/1 and TA 30/2 are long-term and high-temperature lubricating greases based on mineral oil and polyurea. These lubricating greases are used for long-term lifetime lubrication ...
Klüber Lubrication
... patented Shell PurePlus Technology. Shell Helix Ultra is a range of top-tier motor oil that is formulated using the unique Shell PurePlus Technology, yielding a motor oil that actively helps keep ...
Shell Lubricants
Groeneveld-BEKA offers a variety of grease to guarantee trouble-free operations and proper lubrication of equipment. GreenLube grease is designed for all of our lubrication products. GreenLube greases: ...
Operating temperature: -30 °C - 260 °C
Viscosity: 0.00033, 0.00003 m²/s
... corrosion protection Typical Characteristics NLGI-grade 2 Kinematic viscosity of the base oil at 40 °C 330,0 mm²/s Kinematic viscosity of the base oil at 100 °C 30,0 mm²/s Working temperature ...
CARL BECHEM
Operating temperature: -30 °C - 180 °C
Viscosity: 0.0004, 0.00004 m²/s
Berutox FH 28 KN is a long-life lubricant for various applications subjected to extreme temperatures in the automotive, steel or paper industry. Berutox FH 28 KN convinces by an excellent consistency-temperature behavior ...
CARL BECHEM
Operating temperature: -30 °C - 230 °C
Viscosity: 0.00021, 0.00002 m²/s
Berutox VPT 54-2 is a noise damping long-term lubricating grease for the reduction of friction and wear at high temperatures. Berutox VPT 54-2 is suitable for all approved sliding speeds in grease lubrication ...
CARL BECHEM
Jakob Thaler GmbH
Jakob Thaler GmbH
Jakob Thaler GmbH
Operating temperature: -30 °C - 120 °C
Viscosity: 0.0001, 0.000011 m²/s
... and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -30 °C - 120 °C
Viscosity: 0.00011, 0.000009 m²/s
Flash point: 3 °C
... completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun. Assess the lubrication frequency and ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -25 °C - 80 °C
Viscosity: 0.0001, 0.000009 m²/s
Flash point: 100 °C
OKS 403 is a marine grease for lubrication of machine elements subjected to water or sea water. Areas of application Lubrication of open toothing, friction and rolling bearings, threaded spindles, ...
OKS Spezialschmierstoffe GmbH
Operating temperature: -55 °C - 204 °C
Pour point: 260 °C
Food silicone grease. Silicone fluid grease and synthetic thickener. 20 kg, 50 kg, 180 kg. Available in the following NLGI (Consistency Grade) grades: 000, 00, 0, 1, 2, 3. - Highly resistant and highly mechanically stable. - It has ...
Elesa Lubricantes
Operating temperature: -40 °C - 140 °C
Pour point: 179 °C
Biodegradable grease specially designed for outdoor work. 400 grams, 1 kg, 5 kg, 18 kg, 45 kg, 185 kg and box of 28 cartridges. Available in the following NLGI (Consistency Grade) grades: 000, 00, 0, 1, 2, 3. - Excellent anti-corrosion ...
Elesa Lubricantes
Operating temperature: -40 °C - 180 °C
Pour point: 260 °C
Calcium sulphonate grease with high base oil viscosity, high dropping point and adhesiveness. With excellent EP load carrying capacity and water resistance. 400 grams, 1 kg, 5 kg, 18 kg, 45 kg, 185 kg and box of 28 cartridges. ...
Elesa Lubricantes
... green environmental protection pure vegetable trace lubricating oil, completely soluble in cold water. Product Benefits: Eliminate coolant: no oil mist, improving air quality Eliminate coolant ...
Operating temperature: 320 °C
200 ltrs. drum HTF mineral oil for heat transfer that can be used in any type installations with maximum outlet temperature of 305 °C boiler wall and maximum temperature in the boiler of 320 °C Pirobloc HTF-MINERAL ...
Pirobloc
Operating temperature: -6 °C - 275 °C
200 ltrs. drum HTF synthetic oil for heat transfer that can be used in any type installations with maximum outlet temperature of 275 °C boiler wall. Pirobloc HTF-HIGH FLASHPOINT is a fluid for heat transmission specially ...
Pirobloc
Operating temperature: -10 °C - 315 °C
Viscosity: 0.3 m²/s
Drum of 200 liters of synthetic thermal oil for use in indirect heat processes (-10ºC to 315ºC). Pirobloc HTF-ULTRACLEAN is a synthetic thermal oil for cleaning of systems of heat transfer in liquid ...
Pirobloc
Operating temperature: -45 °C - 232 °C
Flash point: 220 °C
... patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant ...
Synco Chemical Corp
... important as the lubricant itself, as well as the whole implemented mixing / distribution / spraying system. The optimization of the whole system is indissociable and allows in short / middle term : a reduction ...
SOGELUB
... directly on the scoops, at the first contact point of the gob with the delivery system. The lubrication of these systems can be set up with different types of lubricants, wether neat, emulsifiable into ...
SOGELUB
First, these lubricants act as a release agent, preventing the hot glass from sticking to the mould. In order to develop this product range, SOGELUB® initiated a technical survey about the needs and expectations of the ...
SOGELUB
... residues. Its dielectric characteristic restores contacts to their initial efficiency and protects them during operation. LUBRICANT Effectively and durably lubricates all mechanisms, protecting them from wear and degradation ...
arexons
Operating temperature: -56 °C - 120 °C
... Exceptional corrosion resistance for all high strength steel and alloy gear components Excellent shear stability and low oil bleed AEROSPEC 100 is trusted by Aerospace & Defence engineers across the world due to ...
ROCOL
Operating temperature: -73 °C - 120 °C
... 273 AEROSPEC 210 graphite aerospace grease is approved to JSD XG 273 amongst others and designed to give outstanding lubrication performance on equipment such as leaf springs, lift guides, steel wire rope and bowden ...
ROCOL
Operating temperature: -40 °C - 140 °C
... with both anti-friction and plain bearings found in the aviation and shipping industries. Designed to provide long-term lubrication in arduous operating environments. Extending re-lubrication periods and reducing maintenance ...
ROCOL
Viscosity: 0.000129, 0.000019 m²/s
Pour point: -46 °C
Flash point: 243 °C
IGOL RACE FACTORY 0101 10W-50 is a 100% Synthetic Ester and PAO based engine lubricant, specially formulated for powerful, sporty, high speed engines. Improves power by reducing friction and wear. Suitable for petrol ...
IGOL
Pour point: -27, -42, -18, -24 °C
Flash point: 178 °C - 232 °C
Lubrication and hydraulic oils with additives to improve the ageing and oxidation stability. Good wear protection, demulsifying (good water seperation), good air release properties, zinc-containing AW/ EP additive ...
FUCHS PETROLUB SE
Pour point: -45, -48, -36 °C
Flash point: 180, 186, 178, 240 °C
Hydraulic and lubricating oils (machine oils) with a high viscosity index and additives to improve ageing stability, corrosion protection and wear protection. The products of the RENOLIN B HVI range are HVLP hydraulic ...
FUCHS PETROLUB SE
Operating temperature: 40, 15, 100 °C
Pour point: -36, -57, -48 °C
Flash point: 118, 214, 154 °C
Hydraulic and lubricating oils with extremely high viscosity index as well as outstanding cleaning properties and sludge carrying capacity. HVLPD according to DIN 51502 together with DIN 51524-HVLPD ISO 6743-4: ...
FUCHS PETROLUB SE
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining