Pumps

... dewatering pump design offers a high head option exceeding 130 metres, encompassing the speeds for diesel and electrical driven applications. The Warman® DWU dewatering pump has been developed to enhance ...

Flow: 70,000 m³/h
Pressure: 145 psi

... Warman® Q-Series Axial Flow Pumps model QCL model is a horizontal elbow design in fabricated construction with separate pump casing. The pump is designed for continous circulation of ...

Flow: 70,000 m³/h
Pressure: 145 psi

... Warman® Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel. Overview The Warman® Q-Series Axial ...

Electric Compact Pump for use with single-line systems ECP The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line ...

Pressure: 300 bar

SKF KFG piston pump unit for wind turbines has been especially developed for the wind industry. The design is based on SKF's proven KFG series of pumps, which are widely used across the globe in a variety ...

Flow: 1.2, 2.5 l/min
Pressure: 30, 20 bar

The Multi-circuit pump units introduced by SKF are ideally designed to function as gear pumps. They offer choices for pump installation such as units for assembly disconnection from the ...

First among polyurethane machinery manufacturers to develop its own pump more than a decade ago, Cannon has engineered the perfect piston pump to process polyols and isocyanates. Features: •Lower ...

Flow: 1 l/min - 6 l/min
Pressure: 80 Pa

Transfer pumps: Feed material directly from original containers Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer pump. ...

Flow: 0.6 l/min - 6 l/min
Pressure: 20 bar - 400 bar

Drum pumps: High performance piston pumps This drum pump model is available exclusively as a double-acting chop check pump. Along with grease and oils, it also processes ...

... www.dopag.com/products/metering-components-pumps/drum-pumps/pumps-for-lubricants/configurator-for-drum-pumps/ For more detailed information please visit our website ...

The new solenoid-driven metering pump gamma/ XL is the enhancement to our proven gamma/ X and covers a capacity range from 8 – 80 l/h at 25 – 2 bar. The gamma/ XL also has other interfaces, for example CAN bus and Wi-Fi ...

... intelligent peristaltic metering pump. ProMinent is making use of its decades-long experience in the metering pump sector to bring together the best of two worlds. Valve-free metering with the accuracy ...

Flow: 1,079 l/min
Pressure: 8.3 bar

NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP! 3” NON-METALLIC PUMP MODEL ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...

Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar

The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless steel, and hastelloy-C ...

Flow: 1 l/min - 696 l/min
Pressure: 2 bar - 8.3 bar

2'' EXP Non-Metallic Air Operated Diaphragm Pump PD20E-FES-PAA Conductive PVDF ARO® EXP air operated diaphragm pumps with bolted PVDF and conductive PVDF wetted parts offer best in class features ...

Flow: 30 l/min
Pressure: 0.15 bar
Power: 25 W

The Enviro ET30 air pump helps to increase the amount of oxygen in the water. Providing a clean oil free air source, it is exceptionally quiet in operation, as low as 35dB even when running continuously. The ET30 is ...

Flow: 8 l/min
Pressure: 2 bar

... Rated for continuous operation, the Dymax Series is whisper quiet and ruggedly reliable. The diaphragm pump is housed within a clean, tough and compact polycarbonate case which conforms to IEC 1010 for safety.

Flow: 1.6 l/min
Head: 20 m

... Centrifugal pumps incorporate a rotary impeller which draws the liquid into the inlet. The centrifugal action forces the fluid to the extremities of the chamber and through the outlet at pressure. Due to their valveless ...

Flow: 383 l/min

To pump heavy flammable liquids from containers, tanks and open containers. The pump is available in two versions with open conical impeller or a closed centrifugal impeller in different sizes. Technical ...

Flow: 383 l/min
Power: 0.75 kW - 4 kW

... open containers etc. The pump is used either horizontally mounted onto a base plate or fixed vertically.Technical data: Flow rate: max. 383 l/min1 Delivery head: max. 12 mwc1 Viscosity: min. 1 mPas - max. 2500 mPas1 Diameter ...

Flow: 700 l/min
Power: 0.75 kW - 4 kW

... different power ranges. Flow rate: max. 700 l/min1 Delivery head: max. 32 mwc1 Viscosity: min. 1 mPas - max. 150 mPas1 Diameter pump housing: max. 148 mm2 Diameter mounting flanges: max. 265 mm2 Media / Fluids: ...

Pressure: 250 bar

GMG-B Pump aggregate ................................. Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,08 / 0,16 max. delivery pressure in bar: 250 Number of outlets: 1...2 / 6...20 Tank ...

Pressure: 250 bar

GMA-B...-C Piston pump ............................... Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,08 / 0,15 / 0,22 max. delivery pressure in bar: 250 Number of outlets: 1...4 Tank ...

Pressure: 80 bar

Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,04 max. delivery pressure in bar: 80 Number of outlets: 1...6 Tank size in l: 0,38

... Fluid Solutions' pumps are built to last! Our seal-less design makes our pumps leak-proof, and virtually maintenance free. They are environmentally resistant to hot water spray, salt, fog, shock and vibration. ...

DurA-Tek Prime is our new booster pump for the school transportation industry. This pump features a magnetically coupled, seal-less design that eliminates leaks improving overall quality, reliability, ...

Flow: 20 us gal/min

Features Pump • Seal-less design for long life • Wet Rotor Design • Cast aluminum pump casing Motor • 24 VDC motor versions available • Efficient brushless DC motor • Environmentally sealed (IP 67) Wear ...

Flow: 20 m³/h
Pressure: 3 bar

... bioprocessing pump with its patented ReNu SU Technology® cartridge. Quantum offers a step change in pump technology enabling higher downstream process yields throughout the pressure range, exceeding the ...

Flow: 0.001 us gal/min - 31.7 us gal/min
Pressure: 100 psi

... flow rates that remain constant right up to 100 psi Qdos peristaltic chemical metering pumps give users a unique advantage over diaphragm metering pumps.Qdos pumps offer long maintenance ...

Flow: 0 us gal/min - 7 us gal/min
Pressure: 30 psi - 100 psi

... LoadSure® elements for 30-100psi operation and one minute maintenance S, U, Du and Bp pumps are NEMA 2 cased pumps. SN, UN, DuN and BpN are NEMA 4X cased pumps

Flow: 116 l/min
Pressure: 6 bar
Head: 36 m

... Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube Alu 41-L-SL made of aluminium, 2 m PVC spiral hose 1" and hose connections, ...

Flow: 124 l/min
Pressure: 6 bar
Head: 35 m

... Viscosity:max. 1000 mPas Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube SS 41-L-SL made of stainless steel, 2 m solvent ...

Flow: 124 l/min
Pressure: 6 bar
Head: 35 m

... Viscosity:max. 1000 mPas Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube SS 41-L-SL made of stainless steel, 2 m universal ...

Flow: 9,000 m³/h
Pressure: 40 bar
Head: 190 m

ANDRITZ single-stage centrifugal pumps from the ACP series are available in a highly wear-resistant, open impeller design. Thanks to their low axial thrust and open channels, these pumps are suitable ...

Flow: 10,000 m³/h
Pressure: 15 bar
Head: 100 m

The SD series from Andritz is designed to be utilized in the waste water industry. It is a single-stage, channel impeller. It has a free passage of up to 200 mm, heads of up to 100 m and a flow rate of up to 10,000 m³/h. It also has a ...

Flow: 900 m³/h
Pressure: 100 bar
Head: 800 m

The Andritz submersible pumps, SU and HDM series are versatile and ergonomically designed pumps that enable an ideal energy consumption by moving the fluid for mechanical operations. Thousands of ANDRITZ ...

Exair reversible drum vacuum system is driven by air pressure, and can be easily mounted to an assembly with a closed head compartment. Its heavy-duty vacuum engine allows filling of a drum with 55 gallon capacity in less than two minutes. ...

Flow: 2.6, 5.1 l/min
Pressure: 10 bar

02C85 Airspray Paint Pump Thanks to its compacity, the 02C85 pump saves waste during flushing and quick color changes. The fluid section special design combined to GT seals allow priming at very low pressure ...

Flow: 7.2, 14.4 l/min
Pressure: 24 bar

Paint circulation pump for medium or low pressure applications. Description - Stainless steel construction - Designed for medium viscosity materials - Extended lifetime Performance: - High output ...

Flow: 7.2, 14.4 l/min
Pressure: 24 bar

Flowmax® paint pump for medium to low pressure applications. Description - Zero maintenance: FLOWMAX® technology - Designed for moisture-sensitive & abrasive materials - Extended lifetime Performance: - ...

The LAGP400 Grease packer by SKF is designed to lubricate open bearings. This packer has a reduced pressure option for utilizing most of the content of SKF grease cartridges. A 3 spout caps is also includes in this unit. For manual grease ...

The SFK TLGH 1 is a grease gun, with the capability to deliver media through 175 mm or 6.9 in extension pipe; it is equipped with hydraulic gripping nozzle. This device is integrated with 500 mm or 19.7 pressure hose that can be attached ...

The SKF Easy grease filling gun contains a 175 mm long extension pipe with a gripping nozzle. It suits the greasing need for cartridges and slight items that has loose grease. This device has a unique piston design that allows a smooth ...

Flow: 16.2 l/min - 150 l/min
Pressure: 0 bar - 275 bar
Power: 1.3 kW - 54.4 kW

Hydraulic mobile pump T6CCZ series is specially designed for Cardan mounting. The double row ball bearing and a needle bearing double the permissible radial load compare to standard version capability. Product Overview Parker's ...

Pressure: 95, 60 psi

The LPD Series variable volume dispense pumps are stepper motor driven, positive displacement pumps that meet the demands of modern day applications: consistent long-term performance and reliability in ...

The LPM Series of Fixed Volume Dispense Pumps are solenoid driven, chemically inert, positive displacement pumps, which provide accurate and repeatable dispense volumes of 10 to 25 µL in a small ...

Pressure: 5 psi
Power: 2 W - 2.5 W

The LPL Series of Fixed Volume Dispense Pumps are solenoid driven, chemically inert, positive displacement pumps, which provide accurate and repeatable dispense volumes of 25 to 50 µL in a small ...

... quantity according to requirements. The pumps are vertical multi-stage high-pressure centrifugal pumps with a fully enclosed, fan-cooled motor. They are designed especially for use in shell boilers. The ...

... capacity of around five tonnes of steam per hour. The fan can be installed on the top of the boiler; this means that the compact system requires little space for installation. Return-on-investment (ROI) is generally ...

The oil supply module is used for extracting and filtering fossil fuels in ring mains for supplying one or more burners. It is preassembled in an oil collection vessel together with all fittings to form a single or double station for ...

In order to stand up to the tough offshore environments, HYTORC has taken our tried and true high flow pneumatic pump and reconstructed it with stainless steel components. Additionally, we have doubled the size of the ...

Pressure: 1,500, 2,500 bar

The PES pump is HYTORC's workhorse tensioning pump. It has the ability to run multiple tools without sacrificing performance. It is reliable and gives our customers consistent results day in and day ...

Flow: 0 l/min - 10 l/min
Pressure: 30 bar

... Series of tension pumps are our latest design for the tensioning market. This pump was designed with maintenance technicians in mind. With a smaller footprint, HY Series tension pumps ...

Flow: 4,500 l/s
Power: 500 kW

in 1978 WAMGROUP started manufacturing PA-type Archimedean Water Screw Pumps. By the mid 1980s the Company had gained a leading position among European manufacturers due to the acquired know-how and expertise in production ...

Flow: 90 l/s - 90 l/s
Head: 21.5 m
Power: 2.2 kW - 7.5 kW

... Submersible Chopper Pumps consist of an electric motor fitted to a pump impeller and a chopping blade. These pumps are desgned and manufactured to convey water, waste water and liquids ...

Flow: 0.71 m³/h - 0.74 m³/h

... size68 Rotor surfacePainted black Terminal box materialGlass-fiber reinforced plastic Pump impeller materialGlass-fiber reinforced plastic Agitator materialPE Pump housing materialGlass-fiber reinforced ...

Power: 48 W

Weight2.0 kg Housing materialShaft: Stainless steel 1.4305 Insulation classF ModeS1 Protection classI (with customer connection of protective earth)

Power: 22 W

Weight0.70 kg Insulation classB ModeS1 CableFlat plug 6.3 x 0.8 Protection classI (with customer connection of protective earth)

Flow: 2 m³/h - 18 m³/h
Pressure: 1 bar - 5 bar

These small pneumatic suction pumps have evolved from the innovative bringing together of smart components: a pressure adjuster, pressure gauge combine, and a vacuum creator of the M SSX series which ...

Flow: 15 m³/h - 320 m³/h
Pressure: 1 bar - 6 bar

At the cutting edge of technological advancement, this pneumatic suction pumps features a splendid ratio between the amount of used and sucked air, and has the ability to adjust the vacuum level and capacity according ...

Flow: 2.7 m³/h - 31 m³/h
Pressure: 0.1 bar - 0.7 bar

... inlet of the suction connection of a vacuum producer of the M.. SSX lineup had permitted development of these compact pneumatic suction pumps. They ship with an extensive list of notable features to include ...

Flow: 252 l/h
Pressure: max 7.0 bar

The pump's acetal body, with its soft seats and st. st. balls, offers universal paint compatibility, including ceramic glaze coatings. The diaphragm's innovative design, with built-in fluid regulator, offers constant ...

Flow: max 450.0 l/h
Pressure: max 6.0 bar

... the ceramic coated pistons and tungsten carbide ball seats. In addition to high-quality materials, the construction of the pump includes surface treatments. Preventative maintenance is not required since there are ...

Flow: max 10200.0 l/h
Pressure: max 9.0 bar

Available in aluminium and stainless steel this versatile 1 air operated double diaphragm pump is ideal for pumping a variety of waterborne and solvent based coatings including; Adhesives, catalyzed varnishes, paints, ...

Flow: 7 m³/h - 204 m³/h
Pressure: 1.75 bar
Head: 5 m - 95 m

This pump offers strong performance and competitive price/value within the lower spectrum of heavy-duty, centrifugal pump applications. It can be installed in a series without fear of seal failure from ...

Flow: 32 us gal/min - 2,300 us gal/min
Pressure: 20, 18, 25, 14 bar
Head: 17'00" ft - 450'00"

... Puma+ series is composed of centrifugal pumps that integrate three standard setup configurations, including a head fitting that obtains 7.8 bar pressure rate, and 135 cubic meter per hour flow ratio. The pumps ...

Pressure: 7 bar - 30 bar

The DW series is an array of rotary lobe pumps manufactured by SPX. These pumps are offered in 26 variants that strictly complies to high hygiene, 3-A and EHEDG standards. They can deliver 3L / 100 revs ...