Lubricant pumps

Flow: 0.01 l/h - 18 l/h
Pressure: 10 bar - 250 bar

The ORLITA Evolution mikro is an innovative micro-metering pump for high pressures. The hydraulic diaphragm metering pump is the first of its kind with an electronically regulated linear direct power ...

Flow: 320 l/h
Pressure: 780 bar

The diaphragm metering pump Orlita® MH has a robust metal diaphragm, which permits precise pump capacities even at very high pressure. The ORLITA® MH has a modular construction and therefore has a versatile ...

Flow: 0 l/min - 22 l/min
Head: 0 m - 7 m
Power: 200 W

Acid pump - B2 Vario PP The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks ...

Flow: 0 l/min - 45 l/min
Head: 0 m - 8 m
Power: 260 W

Cleaning agent pump Battery - B2 Battery Niro The B2 Vario pump set is suitable for thin, watery to slightly viscous media. The set is suitable for dispensing small quantities, such ...

Flow: 0 l/min - 77 l/min
Head: 0 m - 11.8 m
Power: 320 W

... Drum pump - Mineral oils The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with ...

Flow: 120 l/min
Head: 26 m

With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump ...

Flow: 230 l/min
Head: 13 m

... Drum pump F 426 is ideal for mixing and/or pumping inhomogeneous media. You can keep media moving that tend to segregate, even during pumping. With the outlet closed, e.g. via a hand nozzle, the F 426 ...

Flow: 240 l/min
Head: 30 m
Fluid temperature: 60 °C

The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump ...

Pressure: 0 bar - 80 bar

Piston Pump Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,04 Number of outlets: 1...6 Tank size in l: 0,125 / 0,25 / 0,38 / 0,4 / 0,5

Pressure: 0 bar - 350 bar

Piston pump in steel design Medium: oil / grease Dosing volume per stroke and outlet in cm³: 0,08 / 0,15 / 0,22 Number of outlets: 1...24 Tank size in l: 2...25

Pressure: 0 bar - 60 bar

Delivery Pump Medium: oil Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 Number of outlets: 1...4 Tank size in l: 0,7

Flow: 2,500 m³/h
Fluid temperature: 80 °C

The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...

Flow: 2,800 m³/h
Fluid temperature: 180 °C

... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...

Flow: 1,500 m³/h
Fluid temperature: 427 °C

The ClydeUnion Pumps CUP-BB2 is a heavy duty, horizontal, single or two stage, radially split, between bearings, double suction pump, top-top or side-side suction and discharge connections. The CUP-BB2 ...

Flow: 7 m³/h - 725 m³/h
Pressure: 15, 14, 20, 18 bar
Head: 3 m - 130 m

W+ is a comprehensive range of premium sanitary end-suction centrifugal pumps designed with maximum operating benefits and minimal life cycle costs in mind. Reliable and heavy duty design Energy efficient ...

Flow: 32 us gal/min - 2,300 us gal/min
Pressure: 14, 20, 25, 18 bar
Head: 17'00" ft - 450'00"

W+ centrifugal pumps from SPX FLOW are designed to achieve total cost optimization with high efficiency and product dependability. They are installed in countless process facilities around the world helping producers ...

Flow: 7 m³/h - 204 m³/h
Pressure: 1.75 bar
Head: 5 m - 97 m

This pump offers strong performance and competitive price/value within the lower spectrum of heavy-duty, centrifugal pump applications. It can be installed in a series without fear of seal failure from ...

Flow: 0.1, 0.2, 0.5 l/min
Pressure: 30 bar

MKx gear pump units include a pressure-regulating valve and pressure-relief valve. Electrical pressure monitoring is performed by an integrated pressure switch, and fill-level monitoring also is possible. These units ...

Pressure: 240 bar

... allows mobile equipment to remain idling with pump power on, but the timer is deactivated, allowing manual lubrication functionality. All pumps include low-level and ...

Flow: 0.8, 1.6, 3.2 l/min
Pressure: 400 bar

... operated piston pump for dual-line or progressive systems The ZPU 01/02 high-pressure, high-volume pumps can be used as a supply pump for small to midsize dual-line ...

Flow: 0 us gal/min - 285 us gal/min
Pressure: 0 psi - 120 psi
Head: 20'06"

NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP! 3” NON-METALLIC PUMP MODEL ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...

Flow: 0 l/min - 40.1 l/min
Pressure: 0 bar - 6.9 bar

3/8” non-metallic diaphragm pump The ARO nonmetallic 3/8” PD03P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...

Flow: 0 l/min - 54.5 l/min
Pressure: 0 bar - 6.9 bar

1/2” non-metallic diaphragm pump Flow max.: 54.5 l/min Pressure max.: 6,9 bar Fluid control options for pump with electronic interface (PE05 model): • Solenoid-actuated valve for time-based solenoid ...

Pressure: 100, 200, 150 bar
Fluid temperature: -20 °C - 20 °C

... metering of adhesives, sealants and lubricants Gear metering pumps from DOPAG offer all the features that are required in industry today. They meter a wide range of materials, including adhesives, ...

Flow: 0.0001 l/min - 0.045 l/min
Pressure: 6 bar - 10 bar

... progressive cavity pump is a high-precision volumetric metering system that operates continuously and pulsation-free. The rotational motion of the eccentric screw ensures highly precise, constant metering, particularly ...

Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
Input diameter: 0.25 in - 0.5 in

Variable speed peristaltic pump designed to handle liquids of low to high viscosity. Ideal for laboratory, processing, and OEM applications. Design Features Economical Compact design for ...

Flow: 34 l/min
Pressure: 3,000 bar
Power: 95 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 34 l/min
Pressure: 2,000 bar - 3,000 bar
Power: 124 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 40 l/min
Pressure: 3,000 bar
Power: 148 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW

This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, ...

Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C

Particularly suitable for use on lubrication systems, with a working pressure of 4 bar This range of pumps is particularly suitable for use on lubrication systems, with a working pressure ...

Pressure: 3 bar

... , that spring will act on the piston by pushing lubricant into the delivery piping. Relative value The relative value determines the number of the Single Line 01 distribution cylinders which the pump ...

Flow: 0 l/min - 520 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 350 °C

External gear pump ZPA The self-priming external gear pump ZPA is particularly suitable for uncritical media without fillers which are compatible to the used standard materials The pump ...

Pressure: 10, 30 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Pressure: 40 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m

... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...

Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m

... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive ...

Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m

... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...

Flow: 4 m³/h - 150 m³/h
Pressure: 24, 18 bar

NEMO® progressing cavity pumps in the FSIP® (Full Service in Place) design allow you to save up to 66 percent on servicing time. Available in three variants, these pumps are versatile and can be utilized ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

... substances – the NEMO® BY progressing cavity pump handles even the most challenging materials gently and with low pulsation, irrespective of pressure and viscosity variations. Furthermore, the progressing cavity pump ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... shear-sensitive, lubricating and non-lubricating, thixotropic and dilatant, as well as abrasive or adhesive substances. The pump is ideally suited for high-pressure applications. With four different rotor/stator ...

Flow: 12, 30, 16, 20 m³/h
Pressure: 3.5 bar
Power: 1.1, 1.5, 1.8 kW

Tank Truck Eccentric Disc Pumps is a polyvalent heavy duty pump able to cover a wide range of applications. Depending on the construction, it can handle fuels, solvents, and waste products such oil, glycol ...

Flow: 110, 15, 25, 40, 65 m³/h
Pressure: 12 bar
Fluid temperature: 250 °C

... vane pumps can be dismantled without disconnecting the suction and discharge lines. Pump reassembly requires no special positioning Replacement parts are extremely competitive The pump ...

Flow: 0 m³/h - 80 m³/h
Pressure: 8 bar
Fluid temperature: 70 °C

Rotary Vane Pumps are vehicle-mounted solutions for loading and unloading petroleum products for trucks and transports. These pumps are ATEX certified and compact, and feature an integrated by-pass designed ...

Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m

... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable ...

Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m

Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution 150 lbs ANSI B 16.5 available ...

Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m

... duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber and seal cartridges to API ...

Input diameter: 0.75 in

Pump Material: Polypropylene Shaft: Polypropylene Seals: depending on the support Range: approx. 0.3 l/stroke* Hose connection: ¾” The telescopic suction tube is adjustable from 500 to 950 mm and has a max diameter. 34mm.

Input diameter: 19 mm

... 1.5m Drain pipe DN 19 x 4; 1.5m Range: approx. 0.25 l/stroke* Drum adapters with M 64x4 and G 2” are integrated into the pump housing, allowing for easy attachment in the drum.

Fluid temperature: 90 °C
Input diameter: 1 in

PUMP TUBES MADE OF ALUMINIUM Drive shaft made of stainless steel AISI 316. Hose connection 1” included.

Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...

Flow: 7.5 m³/h - 118.1 m³/h
Pressure: 200 psi - 300 psi
Length: 314 mm - 703 mm

Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard. Features: No shaft alignment necessary. No coupling guard required. Special base design enhances cleanability. Reduces ...

Flow: 0.1 l/min
Pressure: 0 mbar - 1,000 mbar
Input diameter: 4.7 mm

The DPE-100 is a diaphragm DC liquid pump with rated voltage of 24 V and a flow rate is 100 ml/min with working pressure range 0 - 1000 mbar. The outlet pressure range is 3 bar and the self-priming pressure is 200 mbar. ...