Piping

High pressure flexible braided hose with continuously extruded Platinum-cured silicone core ensures product integrity while delivering increased pressure capability. BioPure’s Platinum-cured silicone braided hose ...

Inner diameter: 0.5 mm - 25.4 mm
Temperature: -20 °C - 80 °C

Pumpsil platinum-cured silicon tubing is USP IV, FDA and ISO 10993-1 certified and is available in various versions differing in bore size (30), wall thickness (5) and coil length (3) including the bulk reels. It finds applications in ...

Inner diameter: 0.5 mm - 25.4 mm
Temperature: 5 °C - 80 °C

This Bioprene thermoplastic elastomer tube is safe and certified for pharmaceutical and food applications. Bioprene tubes can last ten times longer than other tubing materials which reduces replacement downtime and costs. They also have ...

Inner diameter: 30 mm - 50 mm
Outer diameter: 36 mm - 56 mm

This tube is manufactured from aluminum of type AlMgSi 0.5 F22 and can be used for various applications in the industry, as it comes with a robust design, built to resist the harshest environmental conditions. Depending on the requirements ...

Inner diameter: 2 in - 72 in
Pressure: 600 psi
Temperature: -35 °C - 75 °C

The range of hoses manufactured by Linatex and distributed under the 808 product series come with a custom-built design, which ensures outstanding wear performance. In addition to the resistant rubber components that ...

Inner diameter: 50 mm - 250 mm
Pressure: 150 psi
Temperature: -35 °C - 75 °C

The Linatex® Cut End Hose (800) is the ideal hose to use when pumping and discharging highly abrasive materials. Linatex® premium rubber is renowned for its durability and long-lasting abilities. These ...

Inner diameter: 2 in - 72 in
Pressure: 600 psi
Temperature: -35 °C - 75 °C

... mining hose is built for discharge applications that will see no vacuum or suction. These robust hoses are non-wire construction. Overview The soft wall hose (806) range allows for ...

Vulcane Express extension hose Cat. No. 4770 Reference : 4770 With this blowtorch extension hose, designed for use with the Vulcane Express Cat. No. 472 blowtorch, for plumbing, heating and air conditioning jobs, ...

Inner diameter: 6.3, 8 mm

This hose features crimped unions that measure approximately 3/8 inches. It is an NF EN ISO 3821 model. The unions are located to the left in this female hose.

Inner diameter: 6.3, 8 mm

The Rubber hose 963/10 is a 10 m length and an inner diameter of 6,3 ∅ (mm) with a weigh of 1260 g. It can be placed with crimped unions 3/8" left. This hose is applicable for transferring liquid from ...

Outer diameter: 160, 203 mm
Temperature: 5 °C - 45 °C

The SUS is an elastic extracting hose accessible in two different versions. These two versions are the SUS-5/160 that has a 160mm diameter hose which is used to interfuse to a handy extracting fan MNF. ...

Inner diameter: 4, 5 in
Temperature: 900 °F

High Temperature Exhaust Hose (HT) Highlights The HT hose for fire and emergency service stations can endure exhaust gas temperatures of up to 900˚F (482°C) continuous in a properly designed system. Description Plymovent’s ...

Inner diameter: 4, 5 in
Temperature: 400, 600 °F

Standard Temperature Hose (ST) Highlights The ST hose for fire and emergency service stations can endure exhaust gas temperatures of up to 400˚F (204°C) continuous in a properly designed system. Description The ...

Outer diameter: 15 mm - 25 mm

# Made from polypropylene (PP) # Colour: grey # Quick and handy wire and cable organizer # Suitable under numerous circumstances # Standard length of 150 cm # Special tool for quick assembly available (F2)

Inner diameter: 0.063 in
Outer diameter: 0.125 in
Pressure: 0 psi - 105 psi

The Type 85A Polyurethane Hose 8-Ribbon is intended for use in a variety of supply applications that involve pressures from 0 to 105 psig at temperatures of up to 120 °F. This hose has a bend radius of ...

Inner diameter: 0.125 in
Outer diameter: 0.25 in
Pressure: 0 psi - 105 psi

... 1/4" Outer Diameter (Inner Diameter) 1/4" (1/8") Static Burst Pressure Approx. 425 psig at 70°F Type Twin 85A Polyurethane Hose Working Range 0 to 105 psig at 100°F Maximum 120°F

Outer diameter: 0.125 in
Pressure: 0 psi - 105 psi
Temperature: 0 °F - 120 °F

Urethane Hose, 1/8” OD-1/16” ID, Clear, 50’ Roll Notes In normal application hose clamps are not required with hose when used with Clippard hose barb fittings Additional Information Bend Radius 3/16" Color Clear Inner ...

Inner diameter: 12, 16, 20, 25, 32 mm
Outer diameter: 21.1, 44.9, 23.9, 27.9, 35.7 mm
Pressure: 320, 420 bar

Inner diameter: min 9.7 mm
Temperature: -15 °C - 60 °C

FLEXAIR high flexibility hybrid polymer hose extension with prevoS1 safety quick couplers : Prevost's new Flexair high flexibility hose is made using a hybrid polymer that combines the best characteristics ...

Outer diameter: 16 mm - 80 mm
Pressure: 0.02 bar - 16 bar
Temperature: -20 °C - 80 °C

... loss New video contents are available to help you install your PREVOST PIPING SYSTEM compressed air network: www.prevost.eu/how-to-install-compressed-air-network-PREVOST-PIPING-SYSTEM.html

Inner diameter: 1.8 mm - 11 mm
Outer diameter: 3 mm - 16 mm
Pressure: 9 bar - 14 bar

Polyurethane Ester Base Tubes Flexible : and long-lasting Temperature : - 20°C to +70°C Construction : Polyurethane Ester base For use with : Cylinders, PLCs Resistance : to greases and oils Standard : NF E 49-101 Hardness : ...

Inner diameter: 2.5 mm - 51.9 mm
Outer diameter: 4 mm - 59.8 mm
Temperature: -40 °C - 70 °C

... the hose reinforcement core. These materials ensure Flexible and high performance, TPL flexible hoses are crush-proof and has a very low bending radius. Load losses are also minimized, thanks to the ...

Flexible hoses made from natural rubber or PVC are widely used in laboratories. VACUUBRAND provides exceptional hoses made of anti-static PTFE with small flanges of 1.4305 stainless steel. The PTFE tubing ...

Vacuum pulse system for the flexible feeding of reactors, dissolvers and mixers Your AZO advantages: Power connections and drives in media columns Receiver removable without the need for a tool Easy-to-clean receiver parts Large filter ...

Inner diameter: 1.59 mm - 57.15 mm
Outer diameter: 3.18 mm - 69.85 mm
Pressure: 2,200 psi

Clear, Phthalate-Free Tubing Tygon S3™ B-44-3 tubing is specially formulated for transferring a wide variety of beverages including soft drinks, fruit juices, flavored teas and bottled water. In virtually all cases, Tygon S3™ B-44-3 ...

Inner diameter: 0.8 mm - 152.4 mm
Outer diameter: 2.38 mm - 165 mm
Pressure: 2,200 psi

... flexibility can save up to one-third the footage and much of the labor required to install rigid stainless steel or plastic piping. And Tygon S3 B-44-4X's clear, glass-like clarity allows the user to see product flow ...

Inner diameter: 0.5 mm - 50 mm
Outer diameter: 2.5 mm - 60 mm
Temperature: -50 °C - 200 °C

High-Strenght Silicone Tubing Peroxide-cured Versilon SPX-60 silicone tubing is designed for use in applications where flexibility resiliency and durability are required. Produced from a proprietary combination of silicon elastomers, ...

Inner diameter: 2.1 mm - 11 mm
Outer diameter: 3 mm - 16 mm
Pressure: 0 bar - 10 bar

Highly resistant to microbes and hydrolysis, this device has an outside diameter of 3 to 16mm and an internal diameter of 2.1 to 11mm. It can handle water, vacuums and compressed air, and can withstand ambient temperatures between ...

Inner diameter: 2.7 mm - 8.4 mm
Outer diameter: 4 mm - 12 mm
Pressure: 0 bar - 10 bar

Outside diameter: 4 ... 16 mm Internal diameter: 2.7 ... 10.8 mm Temperature-dependent operating pressure: -0.95 ... 10 bar Ambient temperature: -30 ... 60° C Operating medium Compressed air Vacuum Special ...

Inner diameter: 2.9 mm - 12 mm
Outer diameter: 4 mm - 16 mm
Pressure: 0 bar - 14 bar

With an internal diameter between 2.9mm and 12mm, as well as an outside diameter between 4mm and 16mm, this temperature dependent item should be operated under a pressure that does not exceed 14 bar for the best results. In terms of ...

Inner diameter: 20 mm - 250 mm
Outer diameter: 21 mm - 252.2 mm
Pressure: 0.3 bar - 1.5 bar

This Trelleborg industrial-strength ducting hose by KLEGAINE GPU-FG is food-grade and seamless. It is perfect for sucking-up and moving rough particles for both food companies and pharmaceutical labs. This includes vacuum ...

Inner diameter: 25 mm - 500 mm
Outer diameter: 26 mm - 501.7 mm
Pressure: 0.04 bar - 1.65 bar

This Trelleborg industrial-strength, ducting hose from KLEGAINE GPU-M is movable, which makes it perfect for woodworking, foundries, and other average needs. It works well with transporting powders, harsh materieals, ...

Inner diameter: 2.5 cm - 50 cm
Outer diameter: 26 mm - 501.7 mm
Pressure: 0.15 bar - 1.7 bar

You are looking at one of the finest industrial ducting hoses you will find on the market. In addition to being manufactured by one of the leading companies in the industry, this item also comes with a robust ducting ...

High pressure pipes used with high pressure pumps are sheathed in a PVC hose. The maximum permissible oil pressure is 2 500 bar. The connector to the pump holder is G3/4. The connector to the consumer device is available in the sizes ...

Inner diameter: 4.6 mm - 52 mm
Outer diameter: 12.5 mm - 65.5 mm
Pressure: 40 bar - 250 bar

Properties Application areaLow and medium high pressure circuits Return hoses Inner layeroil resistant synthetic rubber Insertone high tensile steel wire braided insert Outer layersynthetic rubber with high temperature, ...

Inner diameter: 6.2 mm - 26.4 mm
Outer diameter: 14.1 mm - 36.6 mm
Pressure: 88 bar - 225 bar

Properties Application areaLow and medium pressure circuits with extreme temperatures (e.g. foundries, compressors) Hydraulics in mechanical engineering Special featuresoutstanding ozone, weather, UV and temperature resistance Inner layeroil ...

Inner diameter: 6 mm - 26.4 mm
Outer diameter: 13.5 mm - 35 mm
Pressure: 88 bar - 225 bar

This product has several special features including a narrow bending radius, a standard EN 857 1 SC, an inner layer of oil resistant synthetic rubber, an high tensile steel wire braided insert, an outer layer that is oil resistant and ...

Temperature: -73 °C - 232 °C

... this hose the preferred solution for many applications. HAM-LET PTFE hoses are available in smooth, convoluted or conductive carbon lined core with stainless-steel braid or silicon covered stainless-steel ...

Temperature: -254 °C - 705 °C

This ham-Let's silver plated female threads enhances the fitting remakeability while minimizing the risk of galling. Also the amount of torque required for fitting assembly is decreased. Keep in mind that any sort of electropolishing ...

Inner diameter: 8, 9.5, 11, 13 mm
Outer diameter: 12, 13.5, 16, 18 mm
Pressure: 16, 12, 10 bar

Light and flexible Hi-Vis safety hose Excellent resistance to oil, solvents, and other non-aqueous solutions Long service life with outstanding aging qualities CEJN straight braided Hi-Vis hose ...

Inner diameter: 8, 10, 12 mm
Outer diameter: 17.5, 19.5, 15 mm
Pressure: 12 bar

... discharge has the potential to cause explosion or damage. The hose offers extreme flexibility in all weather and has a protective cover that stands up well to the elements Technical data Hose material: ...

Inner diameter: 5 mm - 11 mm
Outer diameter: 8 mm - 16 mm
Pressure: 10 bar - 16 bar

... Flexible PUR hose with long service life Pre-assembled and ready to use CEJN Hose Kits come pre-assembled and ready for immediate use. They consist of an extremely flexible, straight braided ...

Inner diameter: 0.125, 0.078, 0.094, 0.25, 0.063 in
Outer diameter: 0.25, 0.125, 0.375, 0.156 in
Pressure: 45 psi - 210 psi

Polyurethane tubing provides excellent flexibility, resistance to kinking and abrasion, superior memory, elasticity, and resists attack by water, ozone, oil, and grease. Designed for application in medical, dental, and industrial fluid-power systems.

Inner diameter: 0.5 in - 2 in

Outer diameter: 20 mm - 158 mm

Inner diameter: 50 mm - 315 mm
Outer diameter: 58 mm - 325 mm

Inner diameter: 57 mm - 628 mm
Outer diameter: 60 mm - 630 mm

This range of horizontally welded pipe model is offered with diameters ranging between 60 mm to 800 mm (2.36 inches to 31.5 inches), as well as wall thicknesses between 1 mm to 3 mm (0.04 inch to 0.12 inch). These pipes may be constructed ...

Inner diameter: 57 mm - 399 mm
Outer diameter: 60 mm - 400 mm
Pressure: 100 mbar

Inner diameter: 140 mm - 254 mm
Outer diameter: 152 mm - 267 mm
Pressure: 0.4 bar - 0.49 bar

Available on request in other lengths and sizes, with customized print transparent with black partial colouring (standard) special colouring on request: partial colouring, complete colouring, transparent Applications Municipal Disposal ...

Inner diameter: 45 mm - 70 mm
Outer diameter: 50 mm - 76 mm
Pressure: 0.2 bar - 0.42 bar

Material wall: TPE wall thickness between spirals approx. 0.6 mm spiral: spring steel wire (stainless steel 1.4310) Applications drinking water applications Properties acc. to TRGS 727 and ATEX 2014/34 EU, with earthing at both ...

Inner diameter: 32 mm - 203 mm
Outer diameter: 40 mm - 214 mm
Pressure: 0.42 bar - 2.52 bar

... thickness between spirals approx. 0.7 mm Applications Phamaceutical industry Chemicals industry Food industry Properties The hose conforms with EU Guideline 10/2011 Approved for food-grade categories: A, B, C, ...

Temperature: -20 °C - 100 °C

The successful use of hose pumps in a number of situations led Verder to develop a hose with an enhanced construction. Hoses in peristaltic pumps generally fail due to fatigue of the ...

Temperature: -20 °C - 85 °C

For safety reasons we do not recommend pumping liquids greater than 85°C (185°F). Verderflex produces a range of standard tubing to meet the requirements of the wide and varied applications of its tube pumps. However, not all tubes are ...

Inner diameter: 2 mm - 13 mm
Outer diameter: 4 mm - 16 mm
Pressure: 6 bar - 20 bar

- Made of polyethylene (PE) - Color black (red, blue, green, yellow, natural, brown, orange and grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature range ...

Inner diameter: 2 mm - 16 mm
Outer diameter: 4 mm - 20 mm
Temperature: -60 °C - 100 °C

- Made of polyamide (PA) - Color black (red, blue, green, yellow, natural, brown, orange and grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature range ...

Inner diameter: 2.3 mm - 11 mm
Outer diameter: 4 mm - 16 mm
Temperature: -35 °C - 70 °C

- Made of polyester-polyurethane (PU) - Color black (red, blue, green, yellow, natural, brown, orange a nd grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature ...