Pipes

High pressure flexible braided hose with continuously extruded Platinum-cured silicone core ensures product integrity while delivering increased pressure capability. BioPure’s Platinum-cured silicone braided hose is supported by an industry ...

Inner diameter: 2 in - 72 in
Pressure: 600 psi
Temperature: -35 °C - 75 °C

The range of hoses manufactured by Linatex and distributed under the 808 product series come with a custom-built design, which ensures outstanding wear performance. In addition to the resistant rubber components that make up this incredible ...

Inner diameter: 50 mm - 250 mm
Pressure: 150 psi
Temperature: -35 °C - 75 °C

The Linatex® Cut End Hose (800) is the ideal hose to use when pumping and discharging highly abrasive materials. Linatex® premium rubber is renowned for its durability and long-lasting abilities. These hoses are available in 2" to 14" ...

Inner diameter: 2 in - 72 in
Pressure: 600 psi
Temperature: -35 °C - 75 °C

The soft wall mining hose is built for discharge applications that will see no vacuum or suction. These robust hoses are non-wire construction. Overview The soft wall hose (806) range allows for moderate flexibility and is preferred ...

Outer diameter: 16 mm - 80 mm
Pressure: 0.02 bar - 16 bar
Temperature: -20 °C - 80 °C

The new PREVOST PIPING SYSTEM compressed air network range comprises compact, lightweight and resistant pipes and fittings made entirely from aluminium. Aluminium pipe for compressed ...

Inner diameter: 20 mm - 80 mm
Pressure: 13 bar
Temperature: -10 °C - 60 °C

SYSTEM PVR FOR COMPRESSED AIR RINGMAINS / FITTINGS, ACCESSORIES AND PVR PIPES PVR PVC pipes are a tried and tested concept for compressed air supply and distribution. The cold welding assembly system ...

Inner diameter: 30 mm - 50 mm
Outer diameter: 36 mm - 56 mm

This tube is manufactured from aluminum of type AlMgSi 0.5 F22 and can be used for various applications in the industry, as it comes with a robust design, built to resist the harshest environmental conditions. Depending ...

... There are no electrical or pneumatic components fitted directly on the receiver. The closing devices at the inlet and outlet pipes are connected to the media columns by detachable connectors. The clean gas side is also ...

High pressure pipes used with high pressure pumps are sheathed in a PVC hose. The maximum permissible oil pressure is 2 500 bar. The connector to the pump holder is G3/4. The connector to the consumer device is available ...

Inner diameter: 2 mm - 38 mm
Outer diameter: 4 mm - 420 mm
Pressure: 109 bar - 924 bar

The metric precision steel pipes are designed as per DIN EN 10305-4 standards, contains ST 37.4 NBK (1.0255) steel, are phosphate treated and oiled.

Inner diameter: 2 mm - 66 mm
Outer diameter: 4 mm - 70 mm
Pressure: 48 bar - 670 bar

Metric precision steel pipe 6 m long and manufactured out of Stainless steel 1.4301. It has a working temperature range from -20°C to +120°C and calculation as in DIN 2413 (draft), with a dynamic (up to 200 °C) ...

Inner diameter: 16, 8, 13, 10 mm
Outer diameter: 10, 15, 12, 18 mm

The KUR K copper pipe by Hansa Flex is of refrigerator quality, with a copper conduit design. Individual copper pipes are identifiable by comparing the unique Ø d2 Ø d1 of each copper pipe. ...

HP Tubing, Stainless Steel Acid resistant stainless steel 316L / EN1.4404 cold drawn Industry standard tubing sizes: 1/4", 3/8", 9/16" Over 400MPa working pressure Tested for cyclic pressure resistance Full material ...

Acid resistant stainless steel 316L / EN1.4404 cold drawn Industry standard tubing sizes: 3/8", 9/16" 138MPa working pressure Tested for cyclic pressure resistance Full material traceability Clearly marked individual ...

Temperature: -40 °C - 90 °C

Inner diameter: 43 mm - 207 mm
Outer diameter: 150 mm - 320 mm
Pressure: 6 bar - 16 bar

... production in the above listed sizes, lengths and pressure steps Material lining: polyurethane flange: R St 37, primed pipe: DIN 2448 St 37, primed Applications Pneumatic conveying plants Properties ...

Outer diameter: 16 mm - 225 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 100 °C

Pipes under pressure with cold chemical weld jointing systems (solvent welding) using suitable solvent cement (TemperGLUE weld-on) and primer-cleaner. PVC-C PIPE TECHNICAL SPECIFICATIONS: Size ...

Outer diameter: 16 mm - 400 mm
Pressure: 6, 10, 16 bar
Temperature: -40 °C - 140 °C

PP-H Pressure pipes for connection system by butt or socket welding. PVDF Pressure pipes for connection system by butt or socket welding.

MALE / MALE PIPE QUIBBLE TO PRESS - M TYPE PROFIL M Inox 316L EXAMPLE OF ORDER : 641135-15

MALE / MALE PIPE PENETRATION TO PRESS - M TYPE PROFIL M Inox 316L EXAMPLE OF ORDER : 641156-15

Outer diameter: 17.2 mm - 711.2 mm

ISO PIPE WELDED - STAINLESS STEEL 304L - 316L 316L (Model : 72212) Pipes, sheets, flat bars and profiles »

Outer diameter: 80 mm - 250 mm

The Kongskilde stainless steel pipe components are ideal for pneumatic conveying or other types of evacuation systems based on conveying by air. The simple and flexible pipe systems may be adjusted to ...

... normal transport systems is that the adhesive material can stick to the inside of the transport system. With the anti-sticky pipe system from Kongskilde it is possible to transport adhesive material through a pneumatic ...

Outer diameter: 60 mm - 800 mm

... solutions. The FK pipe system is available in different diameters from 60 mm to 800 mm. The dimensions refer to outside pipe diameters. The FK pipe system's modular design comprises pipes, ...

Inner diameter: 6, 14, 10 mm
Pressure: 200,000 psi

The RESATO high pressure tubing is available for tube sizes of 6 mm, 10 mm, 14 mm, 1/4”, 3/8” and 9/16”, for various high pressure valves and fittings. They can operate on pressures up to high 14,000 bar / 200,000 psi, ...

Outer diameter: 25 mm - 355 mm
Pressure: 10 bar

5 m according to EN 1452-2 Dimensions d25x1,5mm – d355x13,6mm Pressure rates PN10 Connections solvent socket Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission Material PVC-U

Inner diameter: 17 mm - 105 mm
Outer diameter: 20 mm - 110 mm
Pressure: 16 bar

Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...

Outer diameter: 20 mm - 158 mm

Inner diameter: 57 mm - 628 mm
Outer diameter: 60 mm - 630 mm

This range of horizontally welded pipe model is offered with diameters ranging between 60 mm to 800 mm (2.36 inches to 31.5 inches), as well as wall thicknesses between 1 mm to 3 mm (0.04 inch to 0.12 inch). These pipes ...

Inner diameter: 57 mm - 399 mm
Outer diameter: 60 mm - 400 mm
Pressure: 100 mbar

Inner diameter: 77 mm - 628 mm
Outer diameter: 80 mm - 630 mm

Inner diameter: 0.21 in - 3.7 in
Outer diameter: 0.33 in - 3.73 in

The heavy wall ClearView plastic tubing in this product series offers ultimate product protection, representing everything you need for your packaging applications, especially the heavy-duty ones. In addition to this, the wall thickness ...

Inner diameter: 0.375 in - 1.375 in
Outer diameter: 0.387 in - 1.39 in

The TSO Series of Square Cap for Pipes/ Protection/Polyethylene, manufactured by Caplugs, is designed as a clear view plastic tubing. This cap is mainly used for packaging and a glass-like clarity application. It is also ...

Inner diameter: 1.58 mm
Outer diameter: 7.94 mm
Pressure: 10,500 bar

... pressure tubes are made to specific requirements and in accordance with specifications required in high pressure technology. The tubes are manufactured from stainless steel and seamless drawn, being subjected ...

Inner diameter: 2.77 mm - 17.48 mm
Outer diameter: 0.25 in - 1 in
Pressure: 0 bar - 1,550 bar

Maximator offers a line of cold drawn thick wall tubing, with fl ow areas to compliment the large orifce medium pressure valves and fi ttings. This tubing is made under strict manufacturing and quality control standards and inspections, ...

Tubes with a very good recovery behavior and a good chemical resistance. Tubes made of Santoprene are made of a thermoplastic elastomer and have a good chemical resistance to aqueous media, acids, bases ...

Fibre glass reinforced for extra process safety. The peroxide cured, fabric-reinforced tubes made of silicone are highly weather resistant and insensitive against moisture. They are suitable for steam sterilization and ...

Flexible tubes with very good weather resistance. The peroxide cured, fabric reinforced tubes made of silicone are highly weather resistant and insensitive against moisture. They are suitable for steam ...

Inner diameter: 2.5 mm - 12 mm
Outer diameter: 4 mm - 16 mm
Temperature: 55 °C

The excellent characteristics of polyurethane tubes: 1.Transparent polyurethane tubes has good transparency, can see the flowing medium’s state clearly. 2.Using the raw materials which are high-performance polyurethane ...

Inner diameter: 2.5 mm - 12 mm
Outer diameter: 4 mm - 16 mm

HOLID Polyamide Tube excels in pressure resistance, weathering resistance,wear resistanceand low temperature resistance. The polyamide tube offers a long and stable service life without flexing fatigue. Polyamide ...

Inner diameter: min 2.5 mm
Outer diameter: min 4.0 mm

The excellent characteristics of polyurethane tubes: 1.Transparent polyurethane tubes has good transparency, can see the flowing medium’s state clearly. 2.Using the raw materials which are high-performance polyurethane ...

Material: PETG (Polyethylene Terephthalate Glycol)

Pressure: 0 bar - 11 bar
Temperature: -180 °C - 200 °C

... ventilation gas, condensate and liquid samples. The sample lines can be directly connected to our tube fittings, which are part of our product range 7-1... The flexible tubes are available in various ...

Inner diameter: 24 mm
Outer diameter: 28 mm

Description: For Tubesystems. Aluminum Tube 28mm. Material: AlMgSi0,5 Color: Natural Andonized Packaging Unit: 10 pcs./ Pack unit