Plastic pipes

Our corrugated cable protection tubing for abrasion protection provides both superior flexibility and high mechanical strength. It allows easy insertion of cables and provides reliable protection of cables in high-vibration environments. ...

Our cable protection program for impact protection impresses with its high flexibility and high mechanical strength. It enables fast cable pulling and reliable protection of the cable in areas with strong vibrations. The corresponding, ...

... offers safe protection of cables and wires. In addition to fabric hoses and cable ducts, the portfolio also offers corrugated pipe solutions for subsequent installations. The corresponding, wide range of accessories can ...

Inner diameter: 20 mm - 80 mm
Pressure: 13 bar
Temperature: -10 °C - 60 °C

SYSTEM PVR FOR COMPRESSED AIR RINGMAINS / FITTINGS, ACCESSORIES AND PVR PIPES PVR PVC pipes are a tried and tested concept for compressed air supply and distribution. The cold welding assembly system ...

Inner diameter: 0.8 mm - 12.7 mm
Outer diameter: 1.6 mm - 14.7 mm
Temperature: -200 °C - 205 °C

Fluorinated ethylene propylene tubing. It is highly transparent and semi-flexible. This product is gamma stable. Applications This is a fluoropolymer tubing especially recommended for the most aggressive chemicals, pressurized gas ...

Inner diameter: 3.2 mm - 31.8 mm
Outer diameter: 9.5 mm - 40.8 mm
Pressure: 2.3 bar - 15 bar

... processing and all downstream’s critical steps from separation to final fill. Applications This product is braided using a fiberglass yarn. This provides high pressure resistance and a maximum of 220˚C. Customization Hardness 60 ...

Inner diameter: 5.1 mm - 31.8 mm
Outer diameter: 13.1 mm - 46.1 mm
Pressure: 10.1 bar - 25.2 bar

Platinum-cured silicone tubing Platinum-cured silicone tubing high pressure resistant.Silicone tubing is the basic material upon any single use process is built. Its great overall performance and resistance to temperature, moist, ozone ...

Inner diameter: 2.5 mm - 12 mm
Outer diameter: 4 mm - 16 mm
Temperature: -20 °C - 130 °C

HOLID Polyamide Tube excels in pressure resistance, weathering resistance,wear resistanceand low temperature resistance. The polyamide tube offers a long and stable service life without flexing fatigue. Polyamide ...

Inner diameter: 2.5 mm - 12 mm
Outer diameter: 4 mm - 16 mm
Temperature: 55 °C

... because there will be the risk of hose rupture. 2.Polyurethane tubes please be careful for working in the workplace where environment temperature is too high (>55 ℃) or full with chemical gas, because ...

Inner diameter: 2 mm
Outer diameter: 4 mm
Pressure: 45 bar

HOLID Polyamide Tube excels in pressure resistance, weathering resistance,wear resistanceand low temperature resistance. The polyamide tube offers a long and stable service life without flexing fatigue. Polyamide ...

Outer diameter: 16 mm - 400 mm
Pressure: 6, 10, 16 bar
Temperature: -40 °C - 140 °C

PP-H Pressure pipes for connection system by butt or socket welding. PVDF Pressure pipes for connection system by butt or socket welding. PP-H PIPE TECHNICAL SPECIFICATIONS: ...

Outer diameter: 16 mm - 225 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 100 °C

Pipes under pressure with cold chemical weld jointing systems (solvent welding) using suitable solvent cement (TemperGLUE weld-on) and primer-cleaner. PVC-C PIPE TECHNICAL SPECIFICATIONS: Size ...

Inner diameter: 0.21 in - 3.7 in
Outer diameter: 0.33 in - 3.73 in

Series TRO ClearView plastic tubing provides the product protection you need for your packaging applications. Available in standard and heavy wall for added protection and durability. To place an order or request ...

Inner diameter: 0.375 in - 1.375 in
Outer diameter: 0.387 in - 1.39 in

... ClearView™ plastic tubing offers unique packaging and a glass-like clarity. These open-ended tubes make an ideal package for a wide variety of products. The tubing has no side seams and is open at both ...

Temperature: -40 °C - 90 °C

Outer diameter: 25 mm - 355 mm
Pressure: 10 bar

5 m according to EN 1452-2 Dimensions d25x1,5mm – d355x13,6mm Pressure rates PN10 Connections solvent socket Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission Material PVC-U

Outer diameter: 40 mm - 250 mm

We offer different PVC pipe fittings, including: Pipes Bends Ells Deviations Couplings Reductions etc... Diameters ranging from 40mm up to 250mm.

Inner diameter: 300 mm - 4,000 mm
Outer diameter: 300 mm - 5,000 mm
Pressure: 0.1 bar - 10 bar

PP Spiral Wound Profile Pipe PP-HM Spiral Wound Gravity Pipes is of high ring stiffness and lower weight compared to HDPE. PP spiral profile pipe ...

Inner diameter: 300 mm - 5,000 mm
Pressure: 0.01 bar - 1 bar
Temperature: 23 °C

HDPE Spiral Profile Pipe HDPE spiral profile wound pipe systems with various stiffness classes which are designed for utility and industrial applications. It is ...

Pressure: 0 bar - 11 bar
Temperature: -180 °C - 200 °C

- Tube for transporting gas or liquids - Low tube tolerances - Color: translucent white - Inner diameter: Ø 4 mm - Outer diameter: Ø 6 mm - Operating temperature range: max. -180 to +200 °C [-292 ...

Inner diameter: 0.5 mm - 25 mm

PTFE TUBING AND HOSE Tubing and hose with optional diameters in scope of 0.5 - 25 mm and walls with thicknesses 0.2 - 2 mm. The tubing can be made in varies version: as smooth tubing, corrugated tubing ...

Inner diameter: 20 mm - 450 mm

aquatherm green pipe has revolutionised the plastic piping sector and has proven its technical suitability worldwide for decades. The innovative green pipe from aquatherm ...

Inner diameter: 16 mm - 110 mm

aquatherm green pipe has revolutionised the plastic piping sector and has proven its technical suitability worldwide for decades. The innovative green pipe from aquatherm ...

Inner diameter: 16 mm - 630 mm

... cooling sector. aquatherm blue pipe is joined via reliable heat fusion, which produces a virtually leak-free and cohesive unit with excellent safety and durability. aquatherm blue pipe combined with ...

Inner diameter: 82 mm - 356.6 mm
Outer diameter: 90 mm - 400 mm
Pressure: 10 bar - 20 bar

... on-site without adversely affecting the durability of the polymer alloy technology. FITT Bluforce RJ is the ideal piping system for horizontal directional drilling. Test on pressure All pipes ...

Inner diameter: 82 mm - 574.8 mm
Outer diameter: 90 mm - 630 mm
Pressure: 10 bar - 20 bar

Description The revolutionary polymer alloy The technology used to manufacture FITT Bluforce is based on the PVC-A polymer alloy, where “A” refers to “alloy”, made up of two main compounds: the traditional ...

Inner diameter: 57 mm - 675.2 mm
Outer diameter: 63 mm - 710 mm
Pressure: 6 bar - 20 bar

... a high degree of seal stability, resulting in easy assembly, perfect functionality and optimal hydraulic tightness of the pipes over time. The full socketing process entails the formation of the socket on the chuck and ...

Temperature: -50 °C - 90 °C

... not possible to issue the Declaration of Conformity (GMP compliance). Application:for hot gas welding of sheets, rods, tubes made of PE-HD (same melt-flow index) Version:string at 2 kg = 450 m Characteristics:UV-stabilized, ...

... these pipes ensures that threads do not turn brittle , break or chip during the entire life cycle. the threading & dimension standards maintained make these pipes ideally suoitable for using as column ...

> Cappillary tube Material: PTFE PFA FEP Temperature rating: -180~260°C Application: Machinery, Electrical and Electronic, Automotive, Chemical, Communication,Medicine Properties: Resistance of high-temperature ...

> Pipe lining Material: PTFE PFA Size: 0.5 inches - 48 inches Process: extrusion and welding The core technology: the first domestic PTFE pipe butt welding master (general manufacturer for ...

Temperature: -40 °C - 80 °C

PE Pipe For Water Supply plumbing tube pe pipe for drainage hdpe fittings plastic pipe tube Description： - Name of product ...

Outer diameter: 21.34 mm - 406.4 mm
Temperature: 80 °C

... 40 PVC Pipes For Water Supply PVC PIPE (ASTM D1785 SCH40 STANDARD) 1. Material: PVC 2. Size: 1/2"- 16" 3: Standard: ASTM D 1785 4. Warranty: 50 YEARS 5. Certificate: SGS,NSF,ISO,COC 6. Color:Gray ,white,customized ...

JIS PVC Pipe VP Standard:JISK 6741/6742/6743 Application: PCB industry Water supply Water treatment LED industry Agriculture

Inner diameter: 0.25 mm - 610 mm
Outer diameter: 1.01 mm - 650 mm
Pressure: 0.38 bar - 20 bar

Dechengwang PTFE tubes are in extruded and molded type, and are available in virgin PTFE, modified PTFE and PTFE Compounds with the widest range of metric size. Up to diameter 260 mm we can supply standard extruded lengths ...

Inner diameter: 2.5, 4, 5, 6.5, 8 mm

Polyurethane Anti-Static Tube Hardness: 95A-98A Fluid: Air Environment and fluid temperature: -20℃~+80℃ Available by the meter or in 100 meter coils. It meets perfectly the requirements of electronic environments ...

Inner diameter: 5 mm - 64 mm
Outer diameter: 10 mm - 80 mm
Temperature: -5 °C - 65 °C

Technical Information - PVC FIBER REINFORCED TUBE Material - two layer of non-toxic clear flexible PVC with a high tensile synthetic fibre spiraled reinforcement in the middle Fluid - air, water, oil, fuel, weak ...

Inner diameter: 5, 6.5, 8, 6.35, 8.46 mm
Outer diameter: 8, 10, 12, 9.5, 12.7 mm
Pressure: 20 bar

PU BRAIDED TUBES XHnotion polyurethane braided tubing is supplied in two different materials (ether or ester).The ether based hoses make it resistant to attack from moisture and water. Polyurethane Braid tubing ester ...

Inner diameter: 4 mm - 160 mm
Temperature: -56 °C - 200 °C

The above-mentioned properties make of PTFE the material of choice when it is necessary to eliminate a number of complex problems that cannot be solved otherwise. However, there are specific applications which claim for higher product ...