Plastic plugs

Diameter: 0.25 in - 1.25 in
Operating temperature: -30 °C - 80 °C

The Gamm Industrial Handles introduces the new TLT oil level plugs. These oil level plugs are currently available in seven different types with different dimensions that will surely fit most of your industry's ...

Diameter: 3 mm - 160 mm
Operating temperature: -30 °C - 50 °C

These GAMM push in plugs are designed to provide a high level of protection for threaded holes. The plugs are manufactured from high grade polythene material and set in natural colour. The push in plugs ...

Diameter: 10 mm - 193.7 mm
Operating temperature: -30 °C - 50 °C

ROUND INSERT-RIBBED - TT PRINT L.D. Polythene. Black.

Operating temperature: 0 °C - 130 °C

MATERIAL Glass-fibre reinforced polyamide based (PA) technopolymer, red colour similar to RAL 3000, matte finish. PACKING RING NBR synthetic rubber. MAXIMUM CONTINUOUS WORKING TEMPERATURE 100°C. GRAPHIC SYMBOL "DRAIN" According ...

Operating temperature: 0 °C - 100 °C

... -foam" air filter in polyurethane foam mesh (polyester base), air filtration 40 µ (grey splash guard). Zinc-plated steel sheet bayonet. Chrome-plated steel safety chain. MAXIMUM CONTINUOUS WORKING TEMPERATURE 100°C. FEATURES ...

Diameter: 70, 57 mm

... without flat dipstick. SFW-BA+F: with zinc-plated steel sheet bayonet, without flat dipstick. Chrome-plated steel safety chain. SFW+F+a: with flat dipstick. SFW-BA+F+a: with zinc-plated steel sheet ...

Vent screws Material: Housing, cap in thermoplastic polyamide 66. Air filter (Form B only) in polyurethane (PU foam). O-ring in rubber (NBR). Version: Black housing. Red cap. Filter mesh 60 µm. Note: Form A: without air filter Form ...

Screw plugs with dipstick Material: Thermoplast, polyamide 66. Dipstick steel, zinc phosphated. Version: Flat seal asbestos-free. Note: Operating temperature: max. 100°C. Form B has a vent hole on the side of the ...

Diameter: 25 mm - 80 mm

Adjustment plugs, plastic without inserts for round and square tubes Material: Body polyamide. Version: Body black. Note: There should be no load on the feet when adjusting. The specified axial, static ...

Diameter: 0.48 in - 2.94 in

CONDUCTIVE PLUGS FOR THREADED CONNECTORS Designed to plug the more popular sizes of both threaded and non-threaded, bayonet type electrical and electronic connectors, CEP Series conductive plugs ...

Diameter: 0.12 in - 13.25 in
Operating temperature: -94 °F - 300 °F

... design Covers a vast range of cap or plug applications Easy to install or remove Standard Color: Red Optional Color: Green for Flex Temp Applicable Specs: NAS 834 The T Series is also available in a flexible vinyl ...

Diameter: 0.4 in - 2.28 in
Operating temperature: -94 °F - 175 °F

PIP Series push-in-plugs are designed to fit SAE thread sizes. These parts offer the convenience of a push-in plug with the plugging quality of a threaded plug. Standard Color: Black Note: ...

Diameter: 15 mm - 69.7 mm

Close existing threads to secure unused ports for future use. This range fits a variety of Metirc and PG thread sizes and can be applied for plugging threads in panels from 12mm to 63mm in diameter. Standard Colours : Light grey ...

Diameter: 13.9 mm - 67.5 mm
Thickness: 11.2 mm - 16.6 mm

... BSP, SAE J 1926 UN/UNF. Each plug features an integrated tight fit sealing lip along with five complete threads. The plug design stops contaminants from entering, while preventing ...

Diameter: 14 mm - 175 mm

... Push-Fit design allows easy application of plug to pipes racked on the yard. Std. Color: blue Using just one plug. Best choice to cover a large range of ID's and hole sizes with just one Flexible ...

Diameter: 12.3, 4.2, 10.2, 8.2, 16.3 mm
Operating temperature: -30 °C - 150 °C

Cap & Body: Nickel Plated Brass Washer: NBR / EPDM Vent Part: Acrylic Co-Polymer on Nylon Support (Hydrophobic - Oleophobic) Connection thread: Metric (EN 60423) Benefits Balance the pressure inside and outside of your systems ...

Diameter: 4.2, 8.2, 10.2, 12.3, 16.3 mm
Operating temperature: -30 °C - 150 °C

Cap & Body: Stainless steel (ASISI 303/316L) Washer: NBR / EPDM Vent Part: Acrylic Co-Polymer on Nylon Support (Hydrophobic- Oleophobic) Connection thread: Metric (EN 60423) Benefits - Balance the pressure inside and outside ...

Operating temperature: -30 °C - 150 °C

Screw plug: Polyamide PA6 V2 Sealing Ring: NBR (on request) Connection thread: Metric (EN 60423)/PG (DIN 40430) Properties - For unused threaded holes - UV resistance (on request) - Halogen free

... Threaded plug/threaded bush: To accommodate adjustable feet on the end face of square tubes or round tubes. Threaded sleeve: To accommodate adjustable feet at right angles to the profile; a hole must be drilled ...

Coupling Plug, 13-pin without plug screw, without current bridge. Glasfibre-reinforced plastic with plug screw rugged version IP 65. For connection directly ...

Diameter: 10 mm - 40 mm
Operating temperature: 0 °C - 100 °C

... Estate guaranteed by a level washer in rubberizing synthetic NBR - They come normally furnished without any label PLASTIC PLUGS WITH BREATHER - Identical for functionality to the serious TMS, carried ...

Diameter: 20, 32, 22, 28 mm
Operating temperature: 0 °C - 100 °C

tecnopolimero with glass Metric and BSP threads - The hexagon socket head plug is useful when want to avoiding protrusions. Carried out entirely in tecnopolimero with glass. Resistant to solvents, oils andother ...

Diameter: 16 mm - 40 mm
Operating temperature: 0 °C - 100 °C

tecnopolimero with glass Metric and BSP threads - Body material: Transparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils with additives, greases, acids and alkali. Avoid contact with alcohol or detergents ...

Diameter: 0.375 in - 2 in

Series of fittings for pipes conveying fluids under pressure with threaded joints.

Diameter: 24 mm

for Gigant-modular-sprinter Gr.14 Technical details Coating: without

Diameter: 25 mm - 104 mm
Operating temperature: 0 °C - 80 °C

PLASTIC BLANK NUT PE 500 EXAMPLE OF ORDER : 961142-25

BIO-SILICO® and SILICOSEN® stoppers are sterilized to provide excellent hygienic performances in applications involving culture media. They are produced via a specialized procedure that provides them with standardized pores. They are ...

SILICOSEN® and BIO-SILICO® are sterile stoppers manufactured in a special process which have regular pores, thus making them ideal for the preparation and sterilisation of culture media. The uniform pores and good permeability to air ...

The Culture plugs have a high air permeability, similar to cotton plugs. In addition, Both versions are chemically and thermally stable and liquid repellent and reusable.

Diameter: 6.4 mm - 55 mm

... use of products such as nylon blanking plug and images Plugs in plastic well in evidence. The site www.panozzosrl.com allows the customer and/or potential customer to find very easily ...

Diameter: 2 mm - 400 mm
Operating temperature: -20 °C - 70 °C
Thickness: 3 mm - 19 mm

... use of products such as parallel protection plug and images Parallel protection plugs in plastic well in evidence. Panozzo has a warehouse of over 700 sqm. which counts more than 5,000 ...

Diameter: 7.6 mm - 83 mm
Operating temperature: -20 °C - 90 °C

... use of products such as tapered cap-plug large flange range and images Parallel protection plugs in plastic well in evidence. Panozzo has a warehouse of over 700 sqm. which counts ...

Diameter: 0.41 mm - 8.71 mm
Operating temperature: 0 °C - 315 °C

... and electroplating industries, these versatile plugs ensure precision and safety by preventing contamination and ensuring clean finishes. Manufactured from premium-grade silicone rubber, our tapered plugs ...

Diameter: 12.7 mm - 28.6 mm
Operating temperature: -40 °C - 105 °C
Thickness: 5.3 mm

... Typically these Snap In Liquid Tight Vent Plugs are used to allow the dissipation of air for venting purposes with heat resistance from -40°C (-40°F) to 105°C (221°F), whilst simultaneously preventing ...

Diameter: 12 mm - 20 mm
Operating temperature: -40 °C - 105 °C
Thickness: 5.3 mm

... Threaded Vent Plugs are manufactured from a Nylon 6/6 with an ultrasonically welded Acrylic Copolymer filter fitted internally, which provides both hydrophobic and oleophobic properties to keep your application contaminant ...

Diameter: 1.8 mm - 127 mm
Operating temperature: 0 °C - 300 °C

The conical rubber caps are used in a wide range of industrial and commercial applications to seal, protect and isolate parts, components or openings. Their conical shape allows them to adapt to various sizes and shapes, providing an ...

Diameter: 3 mm - 55 mm
Operating temperature: 0 °C - 300 °C

The rubber painting protections are devices used in the painting industry to protect specific parts of objects or surfaces during the painting process. These protections can be made in various materials, but the rubber is commonly used ...

Diameter: 18 mm - 94 mm

The paint or rectangular rubber caps with stopper are mainly used in the manufacturing and mechanical industry to protect the ends of pipes, bars or other structures with a square or rectangular shape. These caps provide a hermetic closure ...

Diameter: 9.5 mm - 51 mm
Thickness: 0.5 mm - 3 mm

Seal round holes and avoid ingress of water, moisture and dust. Perfect for covering bores and holes in metal sheets up to 2.5 mm thickness. Snap into position properly.

Diameter: 1.5 mm - 28 mm

"Ribbed plug without flange. Because of its conical design each plug can be used for several thread sizes."

... round lamellar plugs. The surface of these plastic plugs can be either smooth or with a spark erosion structure. They are ideal for sealing pipes, boreholes or other circular ducts. Our ...

Diameter: 10 mm - 100 mm

Tube end plugs AS close off the front of deburred construction tubes to create a visually appealing termination and to protect against injuries. The plastic tube end plugs are made ...

Diameter: 6.4 mm - 16 mm

PARALLEL INSIDE PROTECTION CAPS - WIDE FLANGE AND HEIGHT Material: LDPE Colour : Natural Dimensions : mm Ref. 56 are inside protection caps intended for inside or outside protection with wide flange and height. Available with or without ...

Diameter: 0.5 in - 5 in

SAE HEXAGONAL FLANGE PROTECTION - 3000 & 6000 PSI Material: LDPE Colour : Red, blue Dimensions : mm S3H and S6H are intended for 3000 PSI (210Bar) and 6000 PSI (420Bar) SAE hexagonal flange protection - without place for O-Ring

Diameter: 14.2 mm - 596 mm

PUSH-IN FLANGE PROTECTION - TOTAL COVERS Material: LDPE Colour : Natural Dimensions : mm Push-in flange covers are intended for flange protection total in accordance with DIN3443.

Diameter: 16 mm - 100 mm
Operating temperature: -60 °C - 160 °C

We supply a range of Ex e / Ex d stopping plugs for secure sealing of unused threaded or clearance holes. Available materials: Brass, Nickel plated brass, Stainless Steel 1.4404, V4A, 316L, Aluminum, Polyamide Types ...

Diameter: 15 mm - 70 mm
Operating temperature: -40 °C - 100 °C

Screw plug for the secure sealing of unused threaded or clearence holes. Features: - Temperature range -40 °C / + 100 °C - Protection grade IP66 / IP68 - 5 bar - Test Standard UL 514B

Operating temperature: -40 °C - 120 °C

Screw plug for the secure sealing of unused threaded or clearence holes. Features: - Temperature range depends on the material of the o-ring VMQ: -55 °C / + 120 °C EPDM: -40 °C / + 120 °C NBR: -40 °C / + 100 °C - Protection ...

Protective vents prevents the ingression of a variety of contaminants, such as water, dust and other particles while allowing water vapor molecules to diffuse through the microporous membrane. Equalize pressure and reduce condensation ...

Protective dustproof blind plugs for fiber optic ports. Easy handling pull-tab type for SFP, QSFP and CXP ports. Sold in 10 pcs pack.

USB TYPE-A connector dust cover plug with stopper flap. Hole milling is required for flap installation. Sold in 10 pcs pack.

M6x1.0 Aluminum Metal Venting Screw,Metal Vent Plug, Metal Breathers Code：MIV-06MAS Series：Metal Breather Plug Spec：M6x1.0 Material：AL Color：Silver Brand：MILVENT Model：m6x1.0

transparent color m12*1.5 screw in vents - waterproof - airflow - avoid condensation - heating release

M12*1.5-10 thread length - IP67,IP68 - >500CC/MIN@7KPA OR >2000CC/MIN@7KAP - Plastic Material - Light Grey RAL7035

Diameter: 20 mm - 58 mm
Operating temperature: -40 °C - 110 °C

1. Material : EPDM Specification IP rating : IP67 Temperature range : -40℃ to 110℃

Diameter: 11.7 mm - 59 mm
Operating temperature: -40 °C - 100 °C

1. Material : Polyamide(PA) 2. Temperature range : -40℃ to 100℃ 3. Color : Grey

Diameter: 12 mm - 63 mm
Operating temperature: -40 °C - 100 °C

1. Material : Polyamide(PA) 2. Temperature range : -40℃ to 100℃ 3. Color : Grey