Hot air pipe Seeflex 060ES

polyurethanethermoplasticpolyester

Pressure-resistant Seeflex 060ES is a clear, ether-based thermoplastic polyurethane alloy with an internal polyester scrim. The internally bonded scrim restricts the Seeflex sleeve from stretching and provides superior pressure resistance. Application IMPORTANT: Seeflex 060ES is designed to resist extremely high pressure and therefore it should not be used where the connector is intended to act as a pressure-release point. * Engineering adjustments should be made for changes in diameter. For length adjustments or non-static applications, contact BFM®. The Seeflex 060ES Connector replaced the Camlon Connector. Key Features Laminated polyester scrim provides extra strength Physical properties Wall Thickness (+/- 10%) 1.3mm (3/64 inch) Weight 1,220g/m2 / 43oz/yd2 Breathable No Hardness (Shore A) 90 Tensile Strength (MPa) 47 Elongation (100%) 12.5 Elongation (300%) 16 Ultimate Elongation 692 Tear Strength – Die C (N) 131 100% Modulus (MPa) 12.5 Dust tight? Yes Operating Conditions Surge Temp 140°C / 284 ˚F Low Temp / Flexibility Good Air Permeability 0 Vibration Yes Oscillation Yes, depending on the application. Short connectors will not withstand oscillation but connectors over 600mm will be able to. Compression No Certification and Compliance FDA and USDA FDA 21 CFR 177.1680 & 177.2600 and USDA 3A Certified Manufactured from 3A 20-27 certified Seeflex Material and the BFM® cuff and spigot system is a 3A certified 63-04 sanitary fitting. EU Approved (EC) 1935/2004, 2023–2006 & 10/2011 Options Available with SS Rings? (min. length for all is 150mm) No Available with Plastic Rings? (min. length for all is 150mm) No