Chemical product flexible piping Corner Connector 040E

polyurethanethermoplasticfood

A unique corner connector made of clear ether-based thermoplastic polyurethane alloy connector with a 110° bend to aid the transportation of CIP fluid flowing through your process. Our Corner Connector 040E is made from a clear ether-based thermoplastic polyurethane alloy with a tapered infeed end, 110º angled bend and straight drain output end. It is designed to redirect the clean-in-place (CIP) wash fluid flowing through your process ensuring that your equipment stays dry and your product is free from chemicals used to clean your process machinery. Application CIP (clean-in-place) wash processes to replace traditional steel tun-dish and swiveling pipework. Designed for applications where product/material needs to be transported around a bend. Ideal for under compact machinery (i.e. sifter/sieve) where product needs to be redirected into other equipment where there is limited space. Key Features Can be used in applications where product needs to be transported around a bend Replaces steel tun-dish and swiveling pipework Physical properties Construction/ Finish Gloss/Gloss Wall Thickness (+/- 10%) 0.9 mm / 1/32 inch Breathable No Hardness (Shore A) 90 Tensile Strength (MPa) 40 Elongation (100%) 8 Elongation (300%) 15.6 Ultimate Elongation 593 Tear Strength – Die C (N) 67 100% Modulus (MPa) 8 Dust tight? Yes Maximum Number of Rings (on a single connector) 10 Operating Conditions Surge Temp 120ºC / 248ºF Low Temp / Flexibility Good Surface Resistivity (0hms)* 1010 (Tested to ASTMD-257) Air Permeability 0 Vibration Yes Oscillation No Compression No Certification and Compliance FDA and USDA FDA 21 CFR 177.1680 & 177.2600 and USDA