Threaded plugs

Diameter: 10 mm - 40 mm
Operating temperature: 0 °C - 130 °C

... packing ring in the correct position. OTHER STANDARD EXECUTIONS - TCD. (see page 1516): oil fill plugs. - TSD. (see page 1518): oil drain plugs.

Operating temperature: 0 °C - 130 °C

MATERIAL Glass-fibre reinforced polyamide based (PA) technopolymer, red colour similar to RAL 3000, matte finish. PACKING RING NBR synthetic rubber. MAXIMUM CONTINUOUS WORKING TEMPERATURE 100°C. GRAPHIC SYMBOL "DRAIN" According ...

Operating temperature: 100 °C - 180 °C

Material Black anodised aluminium. Marked "MAGNETIC" and graphic symbol, laser engraved. Permanent magnetic element (AINiCo) Aluminium-nickel-cobalt with a high attractive power, to keep metal particles in oil. Standard executions TMB: ...

Diameter: 12 mm - 27 mm

The thread locking PRB (polyamide allround coating) is a clamping lock which prevents the locking screw from being inadvertently being loosened and becoming detached.

Diameter: 8 mm - 48 mm

The gaskets in types AC and AA correspond to the gaskets DIN 7603, type A (flat gaskets). Specification SteelST Tensile strength class 5.8 (500 N/mm²) ultrasonically and tensile tested zinc plated, nano-passivated (silver / yellowish)

... socket is suitable for mating with either safety flush-mouting plugs or plugs model KST6AR-N/... Used together with a flush-mounting plug it acts as an appliance connector and with ...

Diameter: 10 mm - 33.3 mm

... versions, offers the best possible protection for your application and is always available from stock. Each protection cap or plug is available as a CAD data download. We are also happy to send you free samples for testing. ...

Diameter: 7 mm - 18 mm

Optimum protection during production, storage or transport: GPN 550 from the KAPSTO® standard range with over 3,000 versions, offers the best possible protection for your application and is always available from stock.

Diameter: 7 mm - 18 mm

Optimum protection during production, storage or transport: GPN 551 from the KAPSTO® standard range with over 3,000 versions, offers the best possible protection for your application and is always available from stock.

... well as threaded inserts, made of brass. The surface finish is nickel-plated, while the screw-in plugs are used to facilitate easy mounting of swivel pads or swivel feeds to square tubes. Material: Body ...

Diameter: 20, 30 mm

The Gamm Industrial Handles introduces the new TLT oil level plugs. These oil level plugs are currently available in seven different types with different dimensions that will surely fit most of your industry's ...

Diameter: 18 mm

The TO series of oil plugs are specifically designed for drain-filling. All models in the range are made with black thermoplastic material, and feature a seal made of synthetic rubber. A wide range of plug ...

Diameter: 18 mm

The Gamm synthetic rubber seals are designed effectively to hold against oil. The seals are manufactured from high grade, black thermoplastic materials to ensure reliability and durability. The synthetic rubber seals ensures tight fitting ...

Anti-Vibration Plugs are ideal for BSP hydraulic fittings. The notched thread design allows our anti-vibration plugs to prevent parts coming loose during movement. These hydraulic plugs ...

Diameter: 36 mm

Slottex Plugs are screw on protection plugs that can be applied or removed with screwdriver, spanner or socket. They can be tightened manually or with power tool. The range cover a large ...

Diameter: 105 mm

BSP/GAS Threaded Protection Plug: BSP/GAS Compatible Thread Standard, 3-11 Compatible Thread Size, Fully Threaded Item code: 10319 1231 In stock Red ...

Diameter: 42.5 mm

Magnetic probe plug with one or more elements galvanized steel rod alloy ferrite magnets The probe cap with several elements and magnetic arc closing is the equivalent in characteristics to a magnetic column, but more ...

Diameter: 16 mm - 42 mm

Metal plug with level rod and possibility of breather Metric and BSP threads - Made with milled hexagonal head and crown in light aluminium alloy. - Seal ensured by a gasket with oilproof plain washer. - In the TMAS ...

Diameter: 10 mm - 40 mm
Operating temperature: 0 °C - 100 °C

Plastic plug Plastic plug with breather tecnopolimero with glass Metric and BSP threads PLASTIC PLUGS - Identical for functionality to the serious TM, carried out entirely in tecnopolimero ...

Screw plugs hex head with collar DIN 910 Material: Steel. Version: galvanized. Note: Screw plugs with collar and hexagonal head for plugging holes with parallel threads

Screw plugs aluminium Material: Aluminium. Version: Bright. Flat seal asbestos-free. On request: Cap marked OIL. Drawing reference: 1) flat seal

Screw plugs with dipstick Material: Thermoplast, polyamide 66. Dipstick steel, zinc phosphated. Version: Flat seal asbestos-free. Note: Operating temperature: max. 100°C. Form B has a vent hole on the side of the ...

Operating temperature: -20 °C - 120 °C

- Whitworth pipe thread, thread M5 - With hexagon socket - Chambered O-ring FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120˚C - Working pressure range -0.95 to 16 bar

- Constant distance dimension - Whitworth pipe thread - Chambered O-rings - Sealing FPM - Material: 1.4301/1.4307 - Temperature range -20 to +120˚C - Working pressure range -0.95 to 16 bar - Torque for union nut see table

Operating temperature: -20 °C - 120 °C

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - With hexagon socket - Seals FPM - Material with media contact: Brass, dezincification resistant - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure ...

Operating temperature: -30 °C - 150 °C

... Stops Screw plug:Polyamid PA6 V2 Sealing ring:NBR Connection thread:Metric (EN 60423)/PG (DIN 40430) Protection class:IP54 / IP68 (Oring) Temperature range:-20 °C +100 °C / -30 °C +150 °C Properties:For ...

Operating temperature: -20 °C - 100 °C

Protection Taps Material:Polyamide 6 Temperature range:-20 °C +100 °C

Diameter: 7.5 mm - 16 mm

Metal Blind Stops Screw plug:Nickel Plated Brass O ring:NBR Connection thread:Metric (EN60423)/PG (DIN 40430) Protection class:IP 68 Properties:For unused threaded holes :Assembling ...

Diameter: 8 mm - 36 mm

Hex socket pipe plugs metric fine thread Hex socket screw plugs metric fine thread without sealing ring Hex socket pipe plugs pipe thread

Diameter: 10 mm - 26 mm

Hex head screw plugs with shoulder, metric fine thread without sealing ring Hex head screw plugs with shoulder, metric fine thread with magnet Hex head screw plugs ...

Diameter: 0.12 in - 6.63 in

WW Series tapered caps & plugs are designed with a wide, thick flange to insure against being erroneously forced "all the way through" when used as a plug. This versatile part may easily be used as a ...

Diameter: 0.47 in - 2.52 in

ADP Series threaded aluminum plugs offer a dimpled nose section to form a low-pressure seal with tube ends. Optional Gaskets: Neoprene, Butyl, Buna N Rubber Specs: MIL-C-5501/2, NAS-842 Material: ...

Diameter: 0.94 in - 2.31 in

AFO Series threaded aluminum plugs are designed for positive, metal-to-metal threaded protection. Ideal for flat-faced O-ring hydraulic fittings Optional Gaskets: Neoprene, Butyl, ...

Diameter: 8 mm - 39 mm

DIN 906 Hexagon socket pipe plugs (conical pipe thread) A2 | A4

Diameter: 10 mm - 36 mm

DIN 906 Hexagon socket pipe plugs (conical pipe thread) A2 | A4

Diameter: 10 mm - 30 mm

DIN 910 Hexagon socket screw plugs, heavy type (cylindrical pipe thread) A2 | A4

Diameter: 8, 20, 10, 15 mm

DRAIN PLUG - STAINLESS STEEL 316L (Model : 5230) Series 52 - Fittings and piping accessories

Diameter: 4 mm - 16 mm

CAP FOR PIPE - STAINLESS STEEL 316 Series 54 - unions with compression ring (Model : 5465)

Diameter: 12 mm - 55 mm
Operating temperature: 0 °C - 100 °C

Operating temperature: 5 °C - 80 °C

... connector onto the thread until the o-ring seal contacts the test piece. The TW04 seals without wrenches, sealants or tape. NBR seals meet most industrial requirements. WEH® TW04 is available as a connector with media ...

Diameter: 30 mm - 60 mm

Leveling components in polyamide are bolstered by fiber glass where the inner framework of the foot allows circulation of static loads for security. It finds its use in automation, conveyor systems, packaging, work-desk, aluminum structures a.s.o.

... GmbH. It is a push type waterproofing plug, which has a pressure capacity of up to 450 bar. To obtain the expansion and anchorage of sleeve in hole wall, the operator has to press the ball into the sleeve. The plugs ...

The CV Expander plugs with a maximum force of 450 bar can be accessed in various types of components as well as surface processes. Similarly, the CV plugs can also be accessed in metric and inch volumes. ...

The pressure supported by this item is of up to 60 bar, while the press and fit anchoring concept is a new one of the LP series, making use of a press-in sleeve with a conical construction. The adaptation to the bore during installation ...

Diameter: 21 mm - 28 mm

... 400 Series, manufactured by Protec Plastics, is a series of threaded protection plugs generally designed for protecting BCP, metric fittings and thread from damage and contamination. ...

Diameter: 14 mm - 28 mm

The EP 4000 is designed for use in BSP thread sizes. The unit is compatible to work with a power tool. The flangeless radiator plug is constructed from nylon 6 material. Also, it is available in green, ...

Diameter: 3.18 mm - 1,000 mm

These Threaded Sealing Plugs is manufactured by Protecinfo. The product is suitable for internal threads according to DIN 3852, ISO 6149, SAE J 1926 with recessed Flange. The hexagon head allows tightening ...

Diameter: 0.25 in - 4 in

Dimensions d12-1/4“ – d4“ Pressure rates PN10 Connections tapered male thread Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 0.25 in - 2 in
Operating temperature: -25 °C - 180 °C

... cap that features a stainless steel construction with a hexagonal head machine. It offers both male conic threaded BSP and female cylindric threaded BSP. Moreover, this tool presents a lost wax moulding ...

Loose dust cap • With fixing thread • Fits: A 118 SS • Material: stainless steel AISI 316

Loose dust cap • With fixing thread • Fits: A 119 SS • Material: stainless steel AISI 316

Loose steel dust cap • With fixing thread • Fits: A 118

Diameter: 0.5 in

Description To fit leveling feet to square, non-threaded tubes Material Bush: Nylon PA, glass filled reinforced Threaded insert: Nickel plated brass Color Black Pack Quantity 10 pieces Specials conductive, ...