Threaded feet

Leveling foot M12x85x44 For compensating irregularities in the floor up to 5° Fully assembled spindle and base plate Profile finishing: thread in central hole Product attributes - Profile slot - ...

Diameter: 6 mm - 24 mm

... are made up of a threaded spindle and a plate. Each threaded spindle can be combined with one plate. The total height of the swivel foot is calculated from the length of the threaded ...

Diameter: 40 mm - 60 mm

... consist of a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint. The anti-slip plate absorbs vibrations and prevents the swivel foot ...

Diameter: 80 mm - 120 mm

Material: Foot plate and threaded spindle stainless steel 1.4301. Rubber base (NBR) Shore 85 +/-5, FDA tested. Rubber seal, silicone, FDA tested.Version:Foot plate, high-gloss polished. Threaded ...

... Knuckle Foot D60, M12x75, black Knuckle Foot D60, M12x75, white aluminium, similar to RAL 9006 Knuckle Foot D60, M12x75, stainless Knuckle Foot D30, M6x45, black Knuckle ...

Diameter: 25 mm - 60 mm

... steel threaded stem. - LX-S: zinc-plated steel threaded stem, base with screwdriver slot. - LX-AS: zinc-plated steel threaded stem, base with SBR rubber no-slip disk, supplied assembled ...

Diameter: 25 mm - 50 mm

BASE Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. ARTICULATED STEM Threaded zinc-plated steel with regulation hexagon. STANDARD EXECUTIONS - LS.A: without no-slip disk. - ...

Diameter: 60 mm - 125 mm

BASE Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. ARTICULATED STEM Threaded zinc-plated steel with regulation hexagon. STANDARD EXECUTIONS - LV.A: without no-slip disk. - ...

Diameter: 99, 119, 77 mm

... leveling and to compensate for any slope when setting up machines and systems. The thread d2 can also be used as a through-hole for attachment from below. The fine thread d3 laws precise adjustment ...

Diameter: 24, 12, 18 mm

... spherical washer are permanently connected together. The external diameter of the spherical washer d4 is smaller than the thread core diameter d1, thereby also making mounting possible when the seating is inaccessible. After ...

Diameter: 50, 60 mm

... direction. The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions, bending loads or angular loads are not uncommon ...

Diameter: 8 mm - 60 mm

Material: Black Thermoplastic. Note: For certain minimum quantities special studs lengths available upon request.

Diameter: 8, 10 mm

The PRTN adjustable feet is made up of black thermoplastic and an aluminum steel base. It can also be supplied with pins of various projection, we can provide up to maximum of 70mm for special measures and required minimum quantity of ...

Diameter: 8 µm - 112 µm

PRTB - ADJUSTABLE FEET Black Thermoplastic. For certain minimum quantities special studs lengths available upon request. PRTR - ADJUSTABLE FEET Black Thermoplastic. For certain minimum quantities special studs lengths available ...

Load capacity: 300 kg
Diameter: 8 mm

Socket Mount Leveling Feet: Mount Type - Threaded Stud, Thread Length - 60.0 mm | 2.362 in Item code: 550095 48 In stock Stainless Steel Socket Mount Leveling Foot has a 50.0 mm ...

F1 is crafted from PA-6 with 30% glass fibre and the F2 product is crafted from PP and metal. The color is black. As for the application, while the F1 model can be positioned in literally any angle needed, the F2 model is perfectly suited ...

Made from Nylon 6 (PA-6), Steel bright Zinc plated Ideal for heavy applications with a load capacity given in column D Integral hexagonal nut allows adjustment under load Screwdriver slot in base enables fast assembly with power tools Feet ...

Diameter: 80, 100, 120 mm

... feet in Hygienic DESIGN Material: Foot plate and threaded spindle stainless steel 1.4301. Rubber base (NBR) Shore 85 +/-5, FDA tested. Rubber seal, silicone, FDA tested. Version: Foot ...

Swivel feet steel Description Material: Foot plate and threaded spindle steel. Anti-slip plate (NBR) 70 Shore. Version: Foot plate painted yellow. Threaded spindle ...

... absorbed thanks to the high quality rubber-metal joint. The machine feet can be screwed onto the machine using a threaded spindle. Supplied with Threaded spindle M16X105 is supplied fully assembled as ...

The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.

The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.

The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.

Load capacity: 0 kg - 600 kg

... with extende base Base plate for safe subsequent mounting threaded rod: Material: steel / stainless steel Surface: galvanized / bright Alternative: ball head with internal thread Optionally ...

Load capacity: 0 kg - 900 kg

Adjustable feet in over 20,000 variations - fixed adjustable foot - hinged adjustable foot function: - screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze ...

Load capacity: 2,300 lb - 10,000 lb
Diameter: 1 in - 3 in

Tru-Center™ Tapped Leveling Pads Provides a greater surface area where heavy loads are to be applied or where heavy pressures must be exerted on flexible or softer materials. Pad face swivels and aligns with no damage ...

Load capacity: 2,300 lb - 10,000 lb
Diameter: 1 in - 3 in

Tru-Center™ Threaded Leveling Pads Material: 4140 Finish: Zinc Plated Pad Heat Treat: Rc 36-40 Thread: UNC-2A (Metric: 6g) Available in FixtureProDesign Software and PartSpec CD

Load capacity: 700 lb - 20,000 lb
Diameter: 1 in - 4 in

Material: 1214 Steel Zinc Plated, Yellow Finish ROHS Compliant Non-Skid Material: Neoprene Case hardened, file hard Swivel 10° in all directions Available with non-skid on base

Diameter: 10, 8, 16, 12 mm

Material threaded rod, nut and washer (see tables); Base in reinforced polyamide, anti-slip material in thermoplastic elastomer. State of supply complete with nut, washer and removable anti-slip seal (if provided, see ...

Support element with fine thread and base element 6425FB Body and base element, tempered steel, burnished. Spindle and bearing smooth, tempered steel, plasma-nitrided and burnished. Can be used on T-slots and grid ...

mk offers a large selection of levelling feet, floor plates and the corresponding accessories needed to stabilise or firmly anchor your machine frames, belt conveyors, industrial workstations and much more. All levelling feet have an ...

Load capacity: 1,400 kg - 2,800 kg
Diameter: 60 mm - 125 mm

Load capacity: 1,122 kg - 2,855 kg
Diameter: 50 mm - 120 mm

Diameter: 40, 50, 100 mm

Swivel foot with ESD-capable Anti-Slip-PlateMaterial: Swivel foot: stainless steel Anti-Slip-Plate: ESD-capable rubberColor: Swivel foot: silver glossy Anti-Slip-Plate: blackPackaging ...

Diameter: 30 mm - 100 mm

Swivel plates for threaded rod with ball head for compensating uneven floors. According to the size with fastening holes (SW02) or without fastening holes (SW01) Material: PA Color: black Packaging Unit: 10 ...

Diameter: 30 mm - 100 mm

Base plate with anti-slip plate. According to the size with fastening holes (SW02) or without fastening holes (SW01) Material: Base plate: PA; Anti-slip plate: rubber Color: black Packaging Unit: 10 pcs.

Load capacity: 400, 550, 650 kg
Diameter: 10, 12, 8 mm

PDB ADJUSTABLE FEET - MOVABLE BASE WITH THREAD Material: Base : PP black - PA black (available for PDB58) Screw : Zinc-plated steel Dimensions : metric Adjustable feet with movable base with the thread Ref. ...

Diameter: 30, 25 mm

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, ...

Diameter: 37 mm

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, ...

Diameter: 30, 25 mm

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, ...

Diameter: 38 mm

... Each of these feet come with a Polypropylene & Steel thread pairing, ensuring their ability for use with heavier applications such as machinery/conveyors. Coming with an 'articulating base' each foot ...

Diameter: 20, 30, 50 mm

... These Teflon Adjustable Feet.offer the ability to add a foot to an otherwise threaded application such as a Furniture Leg, but are also compatible with our range of Threaded Tube Inserts ...

... installation. Each Foot can easily be cleaned off thanks to the rounded design of the base, enabling quick and efficient management of regular cleaning procedures. We stock these Stainless Steel Feet with a Rubber ...

Diameter: 25, 35, 40, 50, 60 mm

Materials: High density polyethylene, (HDPE). Surface: Satin. Colour: Black (RAL 9011). Inserts: Zinc plated steel threaded stud, (thread tolerance 6g). SPECIAL REQUESTS: It's possible to supply the inserts ...

Diameter: 37, 49 mm

... density polyethylene, (HDPE). Surface: Satin. Colour: Black (RAL 9011). Inserts: Zinc plated steel revolving threaded stud, (thread tolerance 6g). SPECIAL REQUESTS: None.

Diameter: 80, 105, 130 mm

... Satin. Colour: Black (RAL 9011). Inserts: P903: Threaded and articulated stem (joint ball R.15) type A with hexagonal base in zinc plated steel, (thread tolerance 6g). P903CIN: Threaded and ...

Load capacity: 200 kg

Drawing number 6010-00 Dimension floor bolting M16 x 105 recommended load 1 kN Maximum adjustment load 2 kN Hexagonal wrench for adjustment 24 mm Vulcanised isolation 30° Shore A Weight of wedge 0,59 kg

Load capacity: 500 kg

Drawing number 6020-00 Dimension floor bolting M16 x 105 recommended load 2,5 kN Maximum adjustment load 5 kN Hexagonal wrench for adjustment 24 mm Vulcanised isolation 50° Shore A Weight of wedge 0,59 kg

Load capacity: 1,000 kg

Drawing number 6030-00 Dimension floor bolting M16 x 105 recommended load 3,5 kN Maximum adjustment load 10 kN Hexagonal wrench for adjustment 24 mm Vulcanised isolation 70 ° Shore A Weight of wedge 0,59 kg

Load capacity: 60 kg - 3,500 kg
Diameter: 40 mm - 205 mm

These machine mounts can be loaded in compression, to protect from severe vibrations, shocks and noises.Machine base consisting of a circular metal plate bonded to the elastomer. It allows easy installation and levelling of the machine.High ...

Load capacity: 33, 26, 60, 90, 150 kg
Diameter: 30, 35, 40, 55 mm

This machine mount can be loaded in compression, to protect from severe vibrations, shocks and noises.Machine base consisting of a circular metal plate bonded to the elastomer. It allows easy installation and levelling of the machine.High ...

Load capacity: 50, 100, 65, 115 kg
Diameter: 38, 45, 30, 35 mm

... and noises.Machine mounts consisting of two parallel metal plates bonded to a trapezoid shaped rubber inset and of a twin threaded stud bobbins.High quality natural rubber compounds are employed to produce these series, ...

Load capacity: 500 kg - 4,000 kg
Diameter: 80 mm - 200 mm

Series of mounts utilised as support for various plant and machinery. They come in various sizes. APPLICATIONS Gensets, engines, special equipment, tooling machinery, pumps, HVAC STANDARD PRODUCTION Plates: Steel DC04 (UNI EN 10130) Washers: ...