Threaded feet

Load capacity: 2,300 lb - 10,000 lb
Diameter: 1 in - 3 in

Tru-Center™ Tapped Leveling Pads Provides a greater surface area where heavy loads are to be applied or where heavy pressures must be exerted on flexible or softer materials. Pad face swivels and aligns with no damage ...

Load capacity: 300 kg
Diameter: 32 mm - 80 mm

The PRT's Series's Adjustable Feet is well suited for round tubes. It is manufactured from nylon (PA 6) materials. The adjustable feet comes in black color.

Load capacity: 2,400 kg - 90,000 kg
Diameter: 80 mm - 270 mm

Levelling element, especially for high demands on horizontal stability, e.g. injection moulding machines, presses, punches. GENERAL PRODUCT DESCRIPTION Applications Specifically developed for the mounting of injection moulding ...

Load capacity: 560 kg - 3,800 kg

Material bottom:cast iron Coating:bottom side with slide protection profile; stable vibration damping material that meets high static and dynamic stability requirements; thickness: 16 mm Surface treatment:gray lacquered Hardness: ...

Diameter: 48 mm

The high profile machine mounts are manufactured from synthetic rubber 65-70º shöre and they are designed with an antisliding vent in their base. Available in 10 sizes.

Load capacity: 0 g - 2,500 g
Diameter: 50 mm - 119 mm

Machine Feet, Stainless Steel spindle: stainless steel 1.4305 base plate: stainless steel 1.4301 damper: NBR rubber, oil-proof, 70 shore A

Diameter: 80, 120 mm

Load capacity: 500 kg - 4,000 kg
Diameter: 80 mm - 200 mm

Series of mounts utilised as support for various plant and machinery. They come in various sizes. APPLICATIONS Gensets, engines, special equipment, tooling machinery, pumps, HVAC STANDARD PRODUCTION Plates: Steel DC04 (UNI EN 10130) Washers: ...

The hex nut of the adjustable foot allows easier fitting.The part can be moved in an angle of 23º to 31º. If you want the part without the hex nut, please visit LHVKB.

Diameter: 12 mm - 20 mm

... consist of a plate and a threaded spindle. Any plate can be combined with any threaded spindle. The height of the complete levelling foot is calculated from the length of the threaded ...

Diameter: 30 mm - 120 mm

with adjustment spindle, movable PlacoGrip® Machine levelling feet with adjustment spindle, movable Standard material Reinforced polyamide Adjustment spindle Steel zinc plated Special thread inserts upon request Standard ...

Load capacity: 200 kg

Drawing number 6010-00 Dimension floor bolting M16 x 105 recommended load 1 kN Maximum adjustment load 2 kN Hexagonal wrench for adjustment 24 mm Vulcanised isolation 30° Shore A Weight of wedge 0,59 kg

Diameter: 18 mm

... heavy duty and flexible, with a concentric pattern to provide grip from a large base. The Crutch Feet are easily fitted by hand and come complete with a metal washer moulded into the base to spread the weight out through ...

Load capacity: 60 kg - 3,500 kg
Diameter: 40 mm - 205 mm

These machine mounts can be loaded in compression, to protect from severe vibrations, shocks and noises. Machine base consisting of a circular metal plate bonded to the elastomer. It allows easy installation and levelling of the machine. High ...

Load capacity: 400 kg - 6,000 kg
Diameter: 80, 110, 140, 200 mm

MACHINE ANTI-VIBRATION MOUNT Zinc-plated steel base. Extractable zinc-plated stud with two nuts and two washers. Anti-oil rubber. Rubber hardness: 1st layer: 60ºShore A(±5) 2nd layer: 80ºShore A(±5) Intermediate metallic reinforcement ...

Techn. Data / Items supplied weight = 0.080 kg/piece

Load capacity: 500, 1,000, 2,000 lb

Our high quality levelers are ideally suited for applications in the semiconductor, biotech, medical, and pharmaceutical industries. They are built to order with your choice of pad and stud material. A hardened stainless stud with an ...

Load capacity: 75 kg - 1,000 kg
Diameter: 42 mm - 110 mm

Range of plastic feet. Reinforced polyamide Steel or stainless steel levelling rod. Fixed or tilting rod. LPP with anti-slip plate.

Diameter: 60 mm

Technopolymer Plastic Base Leveling Pads With Rubber Bottom For Anti-Skid (60mm Base)

Diameter: 30 mm

Material: Polyethylene (PE) Colour: Black Material screw: zinc plated iron Further lenghts/size upon special request All dimensions are in mm.

Diameter: 95 mm

MeterialALDC-8, SS41 ApplicationLevel adjustment foot(anchor type)

Load capacity: 0 lb - 2,473 lb
Diameter: 50 mm

FOOT: Polyamide, Fiberglass Reinforced SCREW: 304 Stainless Steel BASE PAD: NBR Rubber FOR LOADS UP TO: 11000 N (2473 lbf) OPERATING TEMPERATURE: Standard: -5°C to +120°C (+23°F to +248°F) Nonslip: -5°C to +110°C (+23°F ...

Load capacity: 235 kg - 19,500 kg
Diameter: 19 mm - 152 mm

... are available in stud or tapped versions with steel, stainless steel or FDA-friendly Delrin® bases. Our standard mounts swivel 15° in all directions to give users optimum performance on uneven surfaces. One-piece studs ...

Support Accessory - Support foot M8 diam. 80mm - Weight: 0.53Kg - Type of material: base in polyamide, stem in galvanized steel

Diameter: 60 mm

9 Fold Section Model : Levelling Feet Base : Special High Quality Polyamide Base with Black color. Articulated Stem: Threaded Zinc Plated Steel or Stainless Steel with regulation Hexagon Rubber Pad (N)-8lip Disks: NBR Rubber