Male plugs

Diameter: 40 mm

Parallel Protection Plug: 30.0 mm Fitting Diameter, 14.5 mm Plug Height, 40.0 mm Flange DiameterItem Code: 12692Black Parallel Protection Plug with a fitting diameter of 30.0 mm and flange ...

Diameter: 22 mm

The large flange on this series of Tapered Caps/Plugs provides greater protection and easy removal. Designed for use as both a cap and a plug, Large Flange Tapered Caps/Plugs provide ...

Diameter: 38.1 mm

Round inserts and glides come in a variety of different types and stylesLightweight Round Inserts offer an easy assembly and a high quality finish to a variety of tubular products. The imperial range comes with a plain shank and the metric ...

The Parker AB Series comprises a broad range of top-mounted breathers and filler breathers. The filler breathers protect hydraulic systems from airborne particle ingress, while allowing sufficient airflow into and out of the fluid reservoir. Product ...

Diameter: 20 mm - 40 mm

The pipe end caps RK are available in 3 types. Type RK-Al is constructed from aluminum, is precision turned and is either a natural or anodized black color. The stainless steel Type RK-ES is precision turned. Type RK-PA is made ...

Diameter: 60 mm
Operating temperature: -35 °C - 70 °C

The pressure compensation plug equalises the pressure that occurs, due to temperature differences, inside the enclosure with the outside environment, while reducing the risk of dust entering the enclosure. It compensates ...

Diameter: 11 mm

Easy to install drain plug that removes condensed water to secure the protection degree. Drain plug to remove condensation water. Easy to install. Fits material thicknesses up to 4 mm. Protection degree IP 44.

Diameter: 18 mm

The closure plug T is made from thermoplastic with a matt black finish. These closure plugs are both aesthetically appealing, durable and functional. Custom colors are available upon request, subject ...

Diameter: 10 mm

The CRF inserts are of GAMM level quality and technology. The threaded rectangular ribbed inserts are constructed out of black thermoplastic in standard M10 20x30 dimensions, with three rib levels supported by columns underneath the main ...

HOME - THERMOPLASTIC PROTECTIONS - EMBOUT À AILETTES ROUND INSERT-RIBBED - TT PRINT L.D. Polythene. Black.

Operating temperature: 0 °C - 100 °C

Material Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Packing ring NBR synthetic rubber O-Ring. The positioning of the O-Ring in its housing guarantees a high tightening torque. Standard ...

Operating temperature: 0 °C - 100 °C

Material Glass-fibre reinforced polyamide based (PA) technopolymer, red colour similar to RAL 3000, matte finish. Packing ring NBR synthetic rubber O-Ring. The positioning of the O-Ring in its housing guarantees a high tightening ...

Diameter: 6 mm - 39 mm

Connection 1metric cylindrical outer thread Sealing form 124° inner cone DesignBlanking socket Constructionstraight StandardDIN 2353 ISO 8434-1 Scope of supplySocket (without union nut and cutting ring) MaterialStainless steel

Diameter: 80 mm - 300 mm
Operating temperature: -60 °C - 200 °C

MALE PLUG TO PRESS - M TYPE PROFIL M Inox 316L EXAMPLE OF ORDER : 641148-15

HEXAGON HEAD MALE PLUG - STAINLESS STEEL 316L (Model : 5226) Series 52 - Fittings and piping accessories

HEXAGON HEAD MALE PLUG (CASTING) - STAINLESS STEEL 316 (Model : 5256) Series 52 - Fittings and piping accessories

Diameter: 4 mm - 16 mm
Operating temperature: -20 °C - 120 °C

- Material brass nickel-plated - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Fits all connections in the programs 14, 15 and 15A in the respective size

Operating temperature: -10 °C - 70 °C

- Material brass nickel-plated - Temperature range 14 to 158 °F (-10 to +70 °C) - Working pressure range 0 to 145 psi (0 to 10 bar) - Fits all screw joints from Program 12 in the respective size

Operating temperature: -20 °C - 120 °C

- Material stainless steel 1.4301 / 1.4307 - Temperature range -20 to +120 ˚C - Working pressure range -0,95 to 16 bar

Diameter: 0.25 in - 4 in

Dimensions d12-1/4“ – d4“ Pressure rates PN10 Connections tapered male thread Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

KOENIG Expander® sealing plugs manufactured by KVT can seal auxiliary and system bores in a matter of seconds. The device is originally designed for hydraulic components. This tool has prevailed when it comes to engine ...

The Koenig Expander® sealing plugs can work with a maximum pressure of 500 bar. The plugs are applicable for use in light metals, high pressure applications, and also for bore holes with a smooth surface ...

The KOENIG Expander® sealing plug is capable of resisting a pressure of up to 350 bar. This unit from the HK series is specifically designed to be used in hard materials. It utilizes a tension or expansion concept that ...

Diameter: 4 mm - 10 mm

Expander® sealing plugs are used for safe, quick and economic sealing of bore holes in fluid technology, e.g. hydraulic drilling holes in jig and fixture construction. When using sealing plugs with pull-anchor, ...

Diameter: 0.12 in - 13.18 in

Caplugs T Series can be used in the form of either caps or plugs. This device can be easily fitted and removed as they are tapered in design and made from polyethylene that is highly pliable or flexible. It is ideally ...

Diameter: 2.23 in - 5.38 in

... of tapered caps and plugs with wide and thick flanges. The series has a dummy-proof construction that prevents the mating element from being installed without removing the cap. It is offered in thirteen sizes used as ...

Diameter: 0.98 in - 1.92 in

Button plugs with flush-type heads are able to plug holes present in sheet metal. They need to be fixed manually. The black caplugs are made with flexible santoprene. It is now easier to handle and it ...

Diameter: 8 mm - 36 mm

Hex socket pipe plugs metric fine thread Hex socket screw plugs metric fine thread without sealing ring Hex socket pipe plugs pipe thread

Diameter: 10 mm - 26 mm

Hex head screw plugs with shoulder, metric fine thread without sealing ring Hex head screw plugs with shoulder, metric fine thread with magnet Hex head screw plugs with shoulder, metric fine thread

Diameter: 7.6 mm - 510 mm

... device are equipped with a tapered body and a flange. The device uses low density polyethylene materials. The color of the plug available is yellow.

Diameter: 20.2 mm - 88 mm

The EP 303 is utilized in providing cushioned protection for flange faces. The protection plug is designed with a tapered body and a wide flange. These components ensures protection of the valve flange's surface. The ...

Diameter: 14.2 mm - 586 mm

The EP 305 is a protective cap developed by Protec Plastics. It is mainly used for both imperial and metric flanges as per DN 2627-2638, 150, BS 5504 and ANSIB16,5 directive requirements. The system is built from low thickness polyethylene ...

... brass, aluminium, stainless steel, with Teflon PFA coating. Type MB Dust caps Type VB Dust plugs Type VB 80 ADR SS + VB 100 ADR Al TW dust plug, stainless steel, with integrated pressure ...

Diameter: 17 mm - 120 mm
Operating temperature: -60 °C - 180 °C

Hexagonal Ex-proof Stopper Plug Technical Details: Type: TK-XX / STOPPER PLUG Protection code: II 2G Exd/e IIC Gb II 1D Ex ta IIIC Da I M2 Exd/e I Mb Certificate: IEP 15 ATEX 0333U Material: MS58 ...

Diameter: 17 mm - 120 mm
Operating temperature: -60 °C - 180 °C

Ex-proof Stopper Plug Technical Details: Type: TS-XX / STOPPER PLUG Protection code: II 2G Exd/e IIC Gb II 1D Ex ta IIIC Da I M2 Exd/e I Mb Certificate: IEP 15 ATEX 0333U Material: MS58 Brass with ...

Operating temperature: -60 °C - 180 °C

Ex-proof Stopper Plug Technical Details: Type: TO-XX / STOPPER PLUG Protection code: II 2G Exd/e IIC Gb II 1D Ex ta IIIC Da I M2 Exd/e I Mb Certificate: IEP 15 ATEX 0333U Material: MS58 Brass with ...

Polyamide plug for square tubes On request also with M8 available Load values above mentioned have to be considered referring to static conditions calculated at the half of the screw length. In conditions of vibrations ...

Diameter: 18 mm - 50 mm

BIO-SILICO® and SILICOSEN® stoppers are sterilized to provide excellent hygienic performances in applications involving culture media. They are produced via a specialized procedure that provides them with standardized pores. They are ...

SILICOSEN® and BIO-SILICO® are sterile stoppers manufactured in a special process which have regular pores, thus making them ideal for the preparation and sterilisation of culture media. The uniform pores and good permeability to air ...

The Culture plugs have a high air permeability, similar to cotton plugs. In addition, Both versions are chemically and thermally stable and liquid repellent and reusable.

Increase outdoor enclosuredurability in harsh environments Venting Protection for Your ApplicationHarsh or changing environmental conditions cause seals tofail and allow contaminants to damage sensitive electronics.Milvent® Protective ...

Diameter: 14 mm - 67 mm

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, protection class: IP54, thread: M12-M63, PG7-PG48, G 1/2"

Diameter: 8 mm - 26 mm
Operating temperature: 150 °C

Parallel male plug with o-ring Operating temperature: max. 150°C dependent on temperature range of tube/ pipe used Operating pressure: up to 60bar depndent on pressure range of tube/ pipe used and used ...

Diameter: 34 mm - 73 mm

Brass fittings – For various applications – For connections from M5 to 2“ – With nickel-plated or polished surface

Diameter: 8 mm - 16 mm
Operating temperature: 150 °C

Operating temperature: max. 150°C Operating pressure: up to 60bar Material: brass nickel-plated/ polished CW614N and CW617N Thread: cyl. thread DIN 3852 con. thread DIN 3858 Medium: Air, water, oil, steam, etc.