Cylindrical plugs

Diameter: 5 mm - 20 mm
Operating temperature: -40 °C - 135 °C

... product settings and allows for the shortest installed height. Install the Short Betaplug in systems up to 500 psi, and choose plugs that range from 5 mm to 20 mm in diameter.

Diameter: 0.16 in - 0.88 in

Lee R.F.O. Plugs are designed to seal holes in thin walls or fragile materials. Designed to be easily removable, these plugs do not require a support shoulder and the installation system ensures that ...

Diameter: 0.13, 0.09, 0.19, 0.16 in

... handling and installing the smallest plug sizes. This is accomplished by pre-installing the pin into the plug. This pre-assembled component adapts more easily to automated installation. Despite their ...

Diameter: 4.9 mm - 51 mm
Operating temperature: 0 °C - 150 °C

... versions, offers the best possible protection for your application and is always available from stock. Each protection cap or plug is available as a CAD data download. We are also happy to send you free samples for testing. ...

Diameter: 10 mm - 33.3 mm

... versions, offers the best possible protection for your application and is always available from stock. Each protection cap or plug is available as a CAD data download. We are also happy to send you free samples for testing. ...

Diameter: 5.2 mm - 15 mm

... versions, offers the best possible protection for your application and is always available from stock. Each protection cap or plug is available as a CAD data download. We are also happy to send you free samples for testing. ...

Diameter: 13.18 mm - 34.42 mm
Operating temperature: 316 °C

High temperature resistant Flexible material helps to accommodate larger tolerances. Can be used as cap or plug. Suitable for studs, pins, external and internal threads and bore holes. Std. Color: natural Material: ...

Diameter: 1.02 mm - 21.01 mm
Operating temperature: 177, 316 °C

Designed for weld nuts of varying thread sizes. Will not blow out due to air pressure. Recommended for Powder coating, e-coating, plating & anodizing. Blu Signature® Product Code: Reusable Color: Special color runs available ...

Diameter: 3 mm - 38.35 mm
Operating temperature: 177, 316 °C

Compression Plugs are designed to mask plain holes and internal threads. Recommended for Powder coating, e-coating, plating & anodizing. Blu Signature® Product Code: Reusable Color: Special color runs available ...

Operating temperature: -20 °C - 120 °C

- Material stainless steel 1.4301 / 1.4307 - Temperature range -20 to +120 ˚C - Working pressure range -0,95 to 16 bar

Operating temperature: -20 °C - 120 °C

- FPM seals - Material 1.4301 / 1.4307 - Temperature range -20 to +120 ˚C - Working pressure range -0,95 to 24 bar - Fits all connections in program 17 and 17A in the respective size

Operating temperature: -20 °C - 120 °C

- Material stainless steel 1.4301 / 1.4307 - Temperature range -20 to +120 ˚C - Working pressure range -0,95 to 16 bar

accessories for threading tools Screw plug GF-Modular sprinter

Diameter: 8 mm - 39 mm

DIN 906 Hexagon socket pipe plugs (conical pipe thread) A2 | A4

Diameter: 10 mm - 36 mm

DIN 906 Hexagon socket pipe plugs (conical pipe thread) A2 | A4

Diameter: 10 mm - 30 mm

DIN 910 Hexagon socket screw plugs, heavy type (cylindrical pipe thread) A2 | A4

Diameter: 11.96 mm - 25.97 mm

Diameter: 50, 45, 80 mm

HOSE PLUGS • 45 mm and 50 mm diameters are suitable for 60 mm hose socket

Diameter: 15 mm - 108 mm

MALE PLUG TO PRESS - M TYPE PROFIL M Inox 316L EXAMPLE OF ORDER : 641148-15

Diameter: 8, 6, 4 mm

CSPP Series plugs are designed to mask the angled face of the countersunk hole and are a tight fit on the clear hole below the angled area. Manufactured from our Ultrabake™ material, these plugs are ideal ...

Diameter: 0.37 mm - 3.1 mm

RSPSF-SH rubber seal plugs are sulfur free and designed for standard copper tube dimensions. Ideal to protect and seal tubing used in various applications, including HVAC components (blue plugs) and medical ...

CPR Suspension Plugs are made from strong, high-impact resistant materials, designed to provide the strength and ruggedness required to maintain integrity when suspending very large rolls. Material: Nylon Standard Color: Black

Diameter: 4 mm - 22 mm

Expander® sealing plugs are used for safe, quick and economic sealing of bore holes in fluid technology, e.g. hydraulic drilling holes in jig and fixture construction. Assembly is effected by pressing in the sealing plug ...

Diameter: 3 mm - 22 mm

Expander® sealing plugs are used for safe, quick and economic sealing of bore holes in fluid technology, e.g. hydraulic drilling holes in jig and fixture construction. Assembly is effected by pressing in the sealing plug ...

Diameter: 19.5 mm - 35 mm

Because O-ring is provided, grooving is not required on the female screw side part material. Because this is a parallel thread, strain on the female screw side part material like tightened a taper thread does not occur. It is suitable ...

This kind of tiny milvents is design for light guide requirement and combine a vent on it. The Patent design of vents is integrated on light guide and it will save the cost on your products where you also have a vent. M4 Light ...

Tiny Venting Elements Pressure Release Breather Plug M4*0.7 Plastic Type Milvent Plastic M4x0.7-4 Breather Screw in Protective Air Vent Plug Waterproof and IP68 Waterproof IP68,IP69K, IP66,IP67 Ventilation ...

1/4 NPT Metal Screw In Vent Plug Code：MIV-NPT1-4MS Spec：NPT1/4 Material：AL Model：NPT1/4

Diameter: 1.6 mm - 25.9 mm
Operating temperature: 0 °C - 315 °C

All of our Silicone Pull Plugs are manufactured using a high grade Silicone, this allows for excellent heat resistance all the way up to 315C°. Pull Plugs are unique in the sense that they come with pull ...

Diameter: 7.8 mm - 21 mm
Operating temperature: 315 °C

Our Silicone Double Flange Pull Plugs are a unique form of Pull Plug offered with a double flange, making them great for a wide variety of holes and installations. Manufactured from a high temperature ...

Diameter: 15.8, 18, 12, 14.7 mm
Operating temperature: 315 °C

Our Silicone Flange Plugs are a form of Silicone Plug designed specifically for countersunk holes, featuring a flange which holds the position when placed inside an application. Manufactured from a high ...

Diameter: 0.75, 1.25 in

Male plug, BSP parallel - Advantages : light, easy assembly with Allen key, o-ring. Threads : G3/4'' and G1''1/4.

Diameter: 1.7 mm - 57.9 mm
Operating temperature: 316 °C

SISPP FLANGELESS PLUGS WITH HEAT RESISTANCE - INSIDE PROTECTION - PULL TAB Material : Silicone Colour : Natural Dimensions : mm The silicone plugs SISPP are intended for inside protection - Ideal ...

Diameter: 2 mm - 76.2 mm

SOFT TIP BLACK MATERIAL ABS (Acrylonitrile butadiene styrene) COLOUR N5 Black RAL 9005 NOTES Available in other colours.

Diameter: 2 mm - 47 mm

CYLINDRICAL PARALLEL PLUGS MATERIAL PE-LD (Low density polyethylene) COLOUR NA Natural NOTES Available in other colours

Diameter: 4.3 mm - 8.4 mm

SCREW CAP FOR COUNTERSUNK HEAD SCREW MATERIAL PE-LD (Low density polyethylene) COLOUR N5 Black RAL 9005 USE Suitable for hexagon socket countersunk flat head screws DIN 7991.

Diameter: 8 mm - 26 mm
Operating temperature: 150 °C

Standard fittings Type 100 – Brass fittings – For connections from M5 to G1“ – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe used Operating ...

Diameter: 8 mm - 16 mm
Operating temperature: 150 °C

– For various applications – For connections from M5 to 2“ – With nickel-plated or polished surface Operating temperaturemax. +150°C Operating pressureUp to 60bar Materials Brass (CW614N/ CW617N) nickel-plated and polished Thread DIN ...

Diameter: 6.4 mm - 38.1 mm

Removable round lids. Material: Polyamide. Color: Black. Consult minimum quantities.

Diameter: 60, 80.1 mm

Cable organizer "KDF". Material: ABS Color: Black, White, Similar gray RAL 7035 Consult minimum quantities.

Diameter: 20, 10 mm

The traditional fittings line have a large products range in order to meet the most varied application needs