Chemical product flexible piping Corner Connector 060ES

polyurethanethermoplasticindustrial

A uniquely shaped connector made of pressure-resistant, ether-based thermoplastic polyurethane alloy with an internal polyester scrim. Features a 110° bend to aid the drainage of CIP fluid from your process equipment. This Corner Connector is made from 060ES, a clear ether-based thermoplastic polyurethane alloy with an internal polyester scrim, a tapered infeed end, 110º angled bend and straight drain output end. It is designed to redirect the clean-in-place (CIP) wash fluid flowing through your process ensuring that your equipment stays dry and your product is free from chemicals used to clean your process machinery. Application CIP (Clean-In-Place) wash processes to replace traditional steel tun-dish and swiveling pipework. Made from pressure-resistant Seeflex 060ES so ideal for high head-pressure CIP applications. Ideal for under compact machinery (i.e. sifter/sieve) where product needs to be redirected into other equipment where there is limited space. Key Features Can be used in applications where product needs to be transported around a bend Replaces steel tun-dish and swiveling pipework Ideal for high head pressure CIP applications Physical properties Wall Thickness (+/- 10%) 1.3mm (3/64 inch) Weight 1,220g/m2 / 43oz/yd2 Breathable No Hardness (Shore A) 90 Tensile Strength (MPa) 47 Elongation (100%) 12.5 Elongation (300%) 16 Ultimate Elongation 692 Tear Strength – Die C (N) 131 100% Modulus (MPa) 12.5 Dust tight? Yes Operating Conditions Surge Temp 140°C/ 284°F Low Temp / Flexibility Good Air Permeability 0