Pipes
Inner diameter: 100 mm - 600 mm
Outer diameter: 118 mm - 700 mm
Ridgidrain Plain Ended Pipes are available in diameters from 100-900mm. They are approved by the BBA, BBA HAPAS and Network Rail. Unperforated (U), half perforated (HP) and fully perforated (P) options are available. ...
POLYPIPE
Outer diameter: 16 mm - 50 mm
Pressure: 16 bar
Pipes made of PVC for underground waterdistribution from diameter 16 to 50 mm - with BENOR quality label according to NBN EN 1452
Eupen Plastic Pipe Division
Inner diameter: 2.5, 4, 5, 6.5, 8 mm
Polyurethane Anti-Static Tube Hardness: 95A-98A Fluid: Air Environment and fluid temperature: -20℃~+80℃ Available by the meter or in 100 meter coils. It meets perfectly the requirements of electronic environments ...
XHnotion
Outer diameter: 48.3 mm
Hot Dip Galvanized Pipe 1、 Carried Standards: GB/T 3091-2015 Welded Steel Pipes for Low Pressure Liquid Delivery GB/T13793-2016 Steel pipes with a Longitudinal Electric (Resistance) ...
Hebei TianChuang Pipe Co., Ltd.
Inner diameter: 4 mm - 12 mm
Outer diameter: 2.5 mm - 9 mm
Pressure: 50 psi - 200 psi
Polyethylene is the most commonly used tubing due to its flexibility, wide range of chemical resistance and lower cost. Nycoil uses high quality Linear Low Density Polyethylene material (LLDPE). LLDPE has a much higher resistance to ...
Nycoil
Outer diameter: 0.25 in - 24 in
The CPVC Pipe, manufactured by Shie Yu Machine, is a hollow cylinder used mostly to transfer substances which can flow such as liquids and gases, slurries, powders, masses of small solids. The pipe is ...
Shie Yu Machine Parts Industrial Co., Ltd.
Inner diameter: 16 mm - 500 mm
Pressure: 6, 10, 12.5, 16, 20 bar
Atoxic UPVC pipes for the construction of pipeline systems for fluids under pressure both for underground and above ground application. The different types of connection are: pre-inserted rubber ring ...
LARETER SpA
Inner diameter: 21.34 mm - 219.1 mm
Temperature: -50 °C - 260 °C
Hose in Fluoride derivative by PTFE (Teflon) with a corrugated outer braid wire of stainless steel AISI 304 Maximum working temperature -50 ° + 260 ° C max Resistance to pressure as a function of the number of braids ...
MASTERTUBI spa
Inner diameter: 10, 20, 18 mm
Outer diameter: 15, 24 mm
Temperature: -20 °C - 100 °C
... Rigid tube made out of special polyester food-grade wall, according to FDA and EU regulations, free of bisphenol A and phthalate. Applications : Very good resistance to shocks, to highly graded alcohol, wide resistance ...
Inner diameter: 18 mm - 300 mm
... : JIS STKM13C, DIN ST52, SAE1020 or Mechanical Construction Use Carbon Steel Pipes, Other Specifications Can be made Customer Request based on. Honing seamless steel pipes (hydraulic cylinder tube, ...
Golden Asia Industrial Co., Ltd.
... Germany on the role of CAST IRON and PLASTIC PIPES against fire insulation to other floors through waste water pipe lines in buildings. With reference to fire insulation to other floors through waste ...
The Graphite Tubes from Analytics are suitable for use in atom absorption spectroscopy. Other AAS comes in different types, such as 10/PAK pyrocoated tube with rings, and 10/PAK coated tube ...
Altmann Analytik Gmbh & Co. KG
Inner diameter: 2 mm - 5.5 mm
Temperature: 0 °C - 150 °C
-Extension Tubes install in seconds and make aiming a breeze -Choose rigid brass Extension Tubes to direct coolant straight to the cutting edge -Choose bendable copper Extension Tubes ...
QPM
High-quality steel tube mainly used for the production of precision bearing rings. It is suitable to make the WPB bearing, inner ring of insert bearing due to high precision on the dimension and fine microstructure. Tube ...
Zhejiang XCC Group CO.,LTD.
Plastic, Fiber Cement, Stainless Steel As soon as cables or pipes have to be conducted through ceilings, walls or base plates, the UGA provides the appropriate casing pipes for nearly each situations. ...
Inner diameter: 0.25 in - 1 in
Pressure: 2,800 bar
Salotech offers and stocks a complete range of high pressure stainless steel lances. From 1/4"OD till 1"OD, lenghts till 12Mrs. and pressures up to 2800 Bar (40KPSI). The lances are cut and threaded to meet your requirments to use them ...
Inner diameter: 12 mm - 50 mm
Pressure: 16 bar
Name Pipe bridge National Standards: 《Stainless Steel Press Fittings Components First Parts: Press Fittings》:GB/T 19228.1 《Stainless Steel Press Fittings Components Second Parts: Thin-wall Stainless Steel Pipes ...
Yuhuan Jinlai Brass Industrial Co., Ltd
Inner diameter: 3 mm - 38 mm
Outer diameter: 5 mm - 48 mm
Pressure: 1.7 bar - 3.8 bar
UNREINFORCED VINYL TUBING Toford unreinforced vinyl tubing is suitable for wide variety of applications. The streamlined inner surface maximizes flow and reduces buildup, making it ideal for beverage dispensing, potable water transfer, ...
Toford
All kinds of Custom welded steel fabricated works, like welded T beam, Welded H beam & column, welded steel frame for construction, welded stair & handrail, and also other steel structural Parts. General details of the Custom fabricated ...
Qingdao Jiahexin Steel Co., Ltd.
Zhejiang Xindeda Special Pipe Industry Co., Ltd.
Inner diameter: 60 mm - 164 mm
Outer diameter: 90 mm - 193 mm
Inner diameter: 30 mm - 500 mm
Shandong Jianning Metals Co., Ltd.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining