Inner diameter: 16 mm - 500 mm
... PTFE-tubing (antistatic) with small flanges in action Items supplied - Tubing ribbed only on the outside, almost smooth malls on the inside. Made of antistatic PTFE with excellent chemical resistance, with KF flanges (stainless steel). Resistance in ...
Inner diameter: 6 mm
... pneumatic hoses are mainly used for delivering pneumatic connection for both clamping stations and extension clamping modules. They are made of polyuretherane, and calibrated on the outside. The maximum operating pressure is 10 bar. The ...
Inner diameter: 63 mm - 200 mm
Outer diameter: 76 mm - 217 mm
Pressure: 0.03 bar - 0.23 bar
... Exhaust gas hose for exhaust fumes/gases up to +200°C Type of construction - Spiral hose with clamping profile Design of the helix - metal band, formed as a clamping profile Material of the helix - Steel strip, ...
Masterflex SE
Inner diameter: 63 mm - 200 mm
Outer diameter: 76 mm - 217 mm
Pressure: 0.02 bar - 0.17 bar
... Exhaust gas hose for exhaust fumes up to +300°C Type of construction - Spiral hose with clamping profile Design of the helix - metal band, formed as a clamping profile Material of the helix - Steel strip, hot-dip ...
Masterflex SE
Inner diameter: 38 mm - 203 mm
Outer diameter: 48 mm - 220 mm
Pressure: 0.02 bar - 0.37 bar
... Exhaust hose for exhaust fume temperatures up to +200 °C, super lightweight, crush-resistant Type of construction - Film hose or fabric hose with attached support coil Execution of the wall - coated, ...
Masterflex SE
Inner diameter: 38 mm - 64 mm
Temperature: -40 °C - 60 °C
... The HP Series Plastic Vacuum Hose provides excellent flexing characteristics and abrasion resistance. It is ideal for porous load handling applications that require low to medium vacuum and high air flow. The smooth inner surface minimizes ...
ANVER Vacuum System Specialists
Inner diameter: 19 mm - 76.2 mm
Temperature: -29 °C - 66 °C
... High strength fiber reinforced PVC hose cover bonded to coated spring steel helix. The FT Series Vacuum Hose offers excellent flexibility for use with vacuum pad attachments that require bending in tight areas. Excellent ...
ANVER Vacuum System Specialists
Inner diameter: 6.4 mm - 50.8 mm
Outer diameter: 11.8 mm - 60.5 mm
Pressure: 70 psi - 250 psi
... interior to reduce loss of flow • Grounding capable through wire • No shrink characteristic under vacuum • Durable, rigid hose for full vacuum handling in non- and semi-porous applications requiring high vacuum and moderate air flow • ...
ANVER Vacuum System Specialists
Inner diameter: 6 mm - 102 mm
Pressure: 2.7 bar - 14.5 bar
Temperature: -20 °C - 90 °C
... Hose recommended for transport of abrasive particles like grain or powder in the food and pharmaceutical industries. Generally acceptable for pneumatic transport of non-flammable bulk materials and suction of all types of abrasive particles Quality ...
Venair
Inner diameter: 0 mm - 5,000 mm
Temperature: -60 °C - 180 °C
Delivered length: 1 m - 4 m
... Overview
Formerly VENA SIL 700/V FR-HL. Highly flexible flame-retardant silicone
hose specifically designed for heating and cooling systems in the railway industry. Complies with EN-45545-2 and UL-94 V0 classifications.
Applications ...
Venair
Temperature: -60 °C - 180 °C
Delivered length: 1 m - 4 m
... Overview
Flexible flame-retardant silicone
hose for heating and cooling systems (former VENA SIL 240 FR-HL). Constructed with VMQ inner and outer layers and a polyester fabric reinforcement. Specifically designed for railway ...
Venair
Inner diameter: 75 mm - 200 mm
Temperature: -70 °C - 800 °C
Delivered length: 2 m - 10 m
... The Fumex Exhaust Hose range is designed for mounting on hose reels and balancer solutions for vehicle exhaust extraction. All hoses are developed to withstand mechanical load and to resist the chemicals ...
Pressure: 320 bar
Temperature: -40 °C - 100 °C
... Applicable for high pressure and vacuum use ■ Oil and waterproof inside and outside layer ■ Available in any hose length* *DILO high-pressure hoses are available in the following length increments: ...
Inner diameter: 3.05 mm
Outer diameter: 6.35 mm
Pressure: 70 MPa
... This is a stainless tube which is used to deliver high pressure hydrogen gas from a tank. Maximum reliability is achieved by applying the technology of our fuel injection tube and by using a metal seal structure in which ...
Usui Co., Ltd
... used for hydraulic oil piping with coolability, such as power steering oil piping and engine oil piping. The tube is manufactured “fin to be coiled on plain tube continuously ...
Usui Co., Ltd
... USUI Push Rod is a hollow bar type product, which consists of a short tube with an upper end (cup shaped) and a lower end (ball shape). On a tube end, an upper end is joined and on another end, a lower end is joined with ...
Usui Co., Ltd
Inner diameter: 3.5 in - 16 in
Outer diameter: 4 in - 20 in
Pressure: 230, 245, 215, 320 psi
... Designed for water pipe network rehabilitation. This thermoplastic polyurethane (TPU) coated hose is manufactured in diameters ranging from 4” (DN125) to 20” (DN500). Its ease of expansion helps to adapt perfectly to ...
Tipsa
Inner diameter: 30 mm - 203 mm
Outer diameter: 33.8 mm - 209.8 mm
Pressure: 10 bar - 28 bar
... for a period of 96 hours, after which the properties of the rubber are at least 60% of the original values. The OROFLEX 10 hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main ...
Tipsa
Inner diameter: 20 mm - 305 mm
Outer diameter: 24 mm - 313.2 mm
Pressure: 11 bar - 38 bar
... for a period of 96 hours, after which the properties of the rubber are at least 60% of the original values. The OROFLEX 20 hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main ...
Tipsa
Inner diameter: 6.6 mm - 47.5 mm
Outer diameter: 10 mm - 54.5 mm
Temperature: -50 °C - 150 °C
... multilayer corrugated plastic tubing especially for outdoor applications with internationally approved standards, V2 acc.UL 94, EN 45545-2 (HL2). Applications • Automation • Plant construction • Shipbuilding • Electrical installations • Machinery ...
Inner diameter: 6.6 mm - 46.7 mm
Outer diameter: 10 mm - 54.5 mm
Temperature: -50 °C - 150 °C
... multilayer corrugated plastic tubing especially for outdoor applications with internationally approved standards, V2 acc.UL 94, EN 45545-2 (HL3). Applications • Automation Properties • high alternate bending strength • oil and benzine resistant • ...
Inner diameter: 18 mm - 115 mm
Outer diameter: 25 mm - 110 mm
Pressure: 15 bar
... Hollow Bar System is the world’s first modular system made from extruded aluminium hollow bars, designed to enable the fast, safe, and functional installation of compressed air lines and other fluid distribution systems. A milestone product in the ...
Inner diameter: 11 mm - 30 mm
Outer diameter: 20 mm - 63 mm
Pressure: 1 bar - 15 bar
... Aluminium Piping System is TESEO’s aluminium piping line that expands the range of its modular pipework systems. APS is a patented solution developed by TESEO, the result of careful industrial design, engineering expertise, ...
Inner diameter: 15, 30, 22, 11 mm
Outer diameter: 20, 40, 25, 63, 50 mm
Pressure: 0 bar - 25 bar
... The MPS - Multifluid Piping System range is specifically designed for the distribution of fluids at working pressures of up to 25 bar. The increased working pressure allows the safe transport of incompressible fluids, such as mineral ...
Inner diameter: 1.58 mm
Outer diameter: 7.94 mm
Pressure: 10,500 bar
... and applications, as in robots or water-jet technology MAXIMATOR provides comprehensively fabricated tube assemblies as in all commercially available tube diameters. ...
Inner diameter: 2.77 mm - 17.48 mm
Outer diameter: 0.25 in - 1 in
Pressure: 0 bar - 1,550 bar
... Maximator offers a line of cold drawn thick wall tubing, with fl ow areas to compliment the large orifce medium pressure valves and fi ttings. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional ...
Inner diameter: 9.5 mm - 19 mm
Pressure: 16 bar - 72 bar
Temperature: -40 °C - 120 °C
... synthetic textile yarn Cover: Smooth synthetic rubber – Abrasion and tough use resistant Application: Specially designed hose for compressed water or air transfer for different industrial purposes Temperature: -25˚C to +95˚C Colors: ...
Inner diameter: 19.5, 10, 15.5 mm
Outer diameter: 16, 22.5, 27.5 mm
Thanks to their rigid design and steel coil, they ensure that there is no pressure loss on the vacuum network.
Inner diameter: 6.35 mm - 38 mm
Outer diameter: 12.1 mm - 53.5 mm
Pressure: 45 bar - 700 bar
DEMAC Srl
Inner diameter: 5 mm - 19 mm
Outer diameter: 9.7 mm - 28.5 mm
Pressure: 160 bar - 700 bar
DEMAC Srl
Inner diameter: 6.35, 8.1, 9.53, 12.7, 16 mm
Outer diameter: 11.7 mm - 25 mm
Pressure: 190 bar - 420 bar
DEMAC Srl
Inner diameter: 2 mm - 11 mm
Outer diameter: 4 mm - 16 mm
Pressure: 0 bar - 10 bar
... the tube - end burr free and square, using Tube cutter and clean the edge to ensure leak tight joints. Ensure the tube is fully inserted into the fitting - until the positive stop, beyond the ’U' seal. For ensuring ...
UFLOW AUTOMATION
Inner diameter: 2, 4, 5, 7, 8 mm
Outer diameter: 4, 6, 8, 10, 12 mm
... It is offering an alternative to reels for excellent ergonomics and space saving. The pre-assembled tubes are equipped with a protection spring, preventing damage to the ends. Advantages Low pressure drop - Good chemical compatibility - Self-retracting Identical ...
UFLOW AUTOMATION
Inner diameter: 2 mm - 8 mm
Outer diameter: 4 mm - 12 mm
Pressure: 12 bar
... Fluids: Many Fluids Materials: Low density polyethylene,50% reticulated polyethylene, food-grade;7 colours "PE Tube" is designed for demanding environments, especially that of water treatment, without compromising operator safety. Excellent resistance ...
UFLOW AUTOMATION
Inner diameter: 4 mm
Outer diameter: 6 mm
Temperature: -190 °C - 200 °C
... -Tube for transporting gas or liquids -Low tube tolerances -Color: translucent white -Material of sample-contacting parts: PTFE The precisely dimensioned M&C sample lines SL1-8 -... are used in gas analysis technology for flexible or ...
M&C TechGroup Germany GmbH
Inner diameter: 0.07 mm
Outer diameter: 2 mm
Pressure: 0.5 bar - 5 bar
... - Capillary tube - Low tube tolerances - Color: translucent white - Inner diameter: Ø 0.7 mm - Outer diameter: Ø 2.0 mm - Operating temperature range: max. -190 to +200 °C [-310 to +392 °F] - Material of sample-contacting ...
M&C TechGroup Germany GmbH
Inner diameter: 4 mm
Outer diameter: 6 mm
Pressure: 0.4 bar - 7 bar
... - Tube for transporting gas or liquids - Low tube tolerances - Color: clear - Material of sample-contacting parts: PVC Different nominal widths The precisely dimensioned M&C sample lines SL1-8 -... are used in gas analysis ...
M&C TechGroup Germany GmbH
Inner diameter: 0.063 in - 0.32 in
Outer diameter: 0.125 in - 0.5 in
Pressure: 140 psi - 256 psi
... 10°C to +80°C. Hose Hardness: 85 Shore D Rolls: 100 mt. Colours available: Neutral, Yellow, Green, Red, Black, Blue FLEXIBLE TUBINGS This tube is suitable for oil and grease applications . Working temperature: ...
Inner diameter: 14 mm - 705 mm
Outer diameter: 17.2 mm - 711.2 mm
Delivered length: 6 m
... ISO PIPE WELDED - STAINLESS STEEL 304L - 316L 316L (Model : 72212) ...
BENE INOX
Inner diameter: 10.4 mm - 211.58 mm
Outer diameter: 13.7 mm - 219.1 mm
Delivered length: 6 m
... ANSI PIPE SCH10S WELDED - STAINLESS STEEL 304L - 316L (Model : 72312) ...
BENE INOX
Inner diameter: 16 mm - 200 mm
Outer diameter: 19 mm - 204 mm
Delivered length: 6 m
... DIN PIPE (WELDED) UNPOLISHED - STAINLESS STEEL 1.4307 - 1.4404 ...
BENE INOX
Temperature: -20 °C - 100 °C
... The successful use of hose pumps in a number of situations led Verder to develop a hose with an enhanced construction. Hoses in peristaltic pumps generally fail due to fatigue of the reinforcement layer. ...
Temperature: -20 °C - 85 °C
... and varied applications of its tube pumps. However, not all tubes are suitable for use in a peristaltic pump. The following criteria are important when selecting a tube: Chemical resistance Food grade quality Tube ...
Inner diameter: 6 mm - 150 mm
Outer diameter: 10 mm - 156 mm
... corrugated tube is manufactured from a combination of aluminum foil and Kraft, with aluminum on the outside and inner layers and Kraft in the middle layer. This unit has a temperature range of -30 to +120°C, and is the ideal reflective ...
Inner diameter: 6 mm - 150 mm
... Protection Tube with Glass Wool also named HAVC control duct hose, can be used to control cables, gear cables, cooling tubes, air conditioning and ventilation pipes, fuel hoses, wire sets and heat sensitive parts for Protection. The ...
Inner diameter: 6 mm - 160 mm
... Our Carburetor Pre-Heater Hose - The Ultimate Replacement Solution Direct Replacement for Peak Performance Are you experiencing issues with your vehicle's HVAC control duct hose? Look no further! Our Carburetor Pre-Heater Hose ...
Delivered length: 15 m
... Basic information
- Model: Hollow Chrome Plated Rod
- Brand: EAST AI
- Material: CK45 medium carbon steel (approx. 0.42–0.50% C)
- Length: customizable, up to 15 m
- ID tolerance: f7 / f8 / g6, etc.
- Surface
WUXI EAST AI MACHINERY CO., LTD
Outer diameter: 250 mm
Delivered length: 15 m
... Product Overview
The hollow chrome-plated piston rod manufactured in 20MnV6 steel combines high tensile strength and good machinability with a weight-reducing hollow section. The inner diameter (ID) is delivered not honed (as-drilled finish), ...
WUXI EAST AI MACHINERY CO., LTD
Delivered length: 15 m
... Overview
42CrMo4 Hollow Chrome-Plated Rod H8 is a precision-engineered hollow shaft designed for hydraulic and mechanical systems requiring reduced weight and high mechanical performance. Manufactured from quenched and tempered 42CrMo4 alloy ...
WUXI EAST AI MACHINERY CO., LTD
Inner diameter: 75 mm - 150 mm
Temperature: 0 °C - 170 °C
Delivered length: 5 m - 10 m
... shortly up to 200°C) available in various dimensions. The Exhaust hose is a super-lightweight and very flexible hose made of TPE foil with outside embedded nylon spiral. The hose is suitable for exhaust ...
Geovent
Inner diameter: 102 mm - 203 mm
Temperature: -60 °C - 450 °C
Delivered length: 1 m - 10 m
... GeoFlex Exhaust HT-450 is a high temperature hose for extraction or blowing of hot air, vapors, exhaust gases or dust up to 450°C (shortly 500°C). Dimensions from ø102 to ø203 mm and lengths up to 10 meter. It is suitable for e.g. ...
Geovent
Inner diameter: 40 mm - 500 mm
Temperature: -40 °C - 90 °C
Delivered length: 5, 10, 15 m
... GeoFlex PUR is an antistatic suitable for dust, chips, granule, powder etc. The hose is clear and very durable. The resistance to oil and petrol fumes is excellent. Integrated steel wire and is suitable for ATEX installations. Temperature ...
Geovent
Inner diameter: 6 mm - 25 mm
... construction, and household applications. ✅ Full English Description: PVC Fiber Reinforced Hose Also called: PVC braided hose or PVC fiber braided hose ✅ Key Features (in English): Material: ...
SHIJIAZHUANG RUISUO SEAL SUPPLIES CO.,LTD
Inner diameter: 8 mm - 22 mm
Temperature: -40 °C - 100 °C
... Engineered for Reliability Our braided hoses deliver exceptional durability and leak-free performance in demanding applications. Featuring a flexible inner tube reinforced with high-tensile steel wire braiding, these ...
SHIJIAZHUANG RUISUO SEAL SUPPLIES CO.,LTD
Inner diameter: 6 mm - 16 mm
Temperature: -40 °C - 93 °C
... Tubing for Air, Water & Low-Pressure Fluids Ideal for pneumatic systems, coolant lines, and general fluid transfer, nylon hose delivers exceptional flexibility and corrosion resistance. Its smooth bore ensures efficient flow, while ...
SHIJIAZHUANG RUISUO SEAL SUPPLIES CO.,LTD
Inner diameter: 6.6 mm
Outer diameter: 13.7 mm
Pressure: 700 bar
... We offer flexible hoses for very high pressure hydraulic systems. FLEX 352-4 is the flexible hose with great performance. Made to ensure a great dynamic and mechanical performance, this is a system component with excellent ...
the best suppliers