Piping

Pressure: 20 bar

... manufactured by Sata, has a length of 10 m and is equipped with quick coupling and nipple. It is a flexible and robust painting air hose that contains no silicone. Its electroconductiveness is in accordance to DIN EN 1953 and has a maximum ...

Inner diameter: 20 mm - 90 mm
Pressure: 4, 7, 5 bar

... To be used with IBG FlexFit® fitting system With reinforcing twist Extra wall thickness ...

Inner diameter: 6 mm - 400 mm
Pressure: 5 bar - 120 bar
Temperature: 50 °C

... According BS 6501 / ISO 10380 Outer Braid Material : Stainless Steel , PP , Thermic protection braid Availability : Hose Assemblies ...

Inner diameter: 4 mm - 36 mm
Outer diameter: 6 mm - 42 mm
Pressure: 185 bar - 426 bar

Prices per metre. We recommend the use of Reinforcing Rings SR-595 for dimensions marked **. The stated operating pressure PB (in bar) is calculated to DIN2413, see technical information and the pressure reduction table.

... Self-extinguishing Low water absorption Good adhesiveness and paintability Low impact strength APPLICATIONS Sight tubes Conduit tubes ...

Inner diameter: 10 mm - 300 mm

... department provides the optimal finish according to your requirements. High availability KIESELMANN disposes of a large area tube warehouse with stainless steel tubes of a total length of more than 200,000 metres. All KIESELMANN tubes ...

... interface tubes. Ductile iron pipe with T-type sliding flexible connection,Ductile iron pipe with k-type interface tube - DN80-DN2600mm DN1200-DN2600mm S and N types - DN100-DN700mm Self -anchored ...

... LIC ® Pex hose series have advantages as follows: high temperature resistance, high abrasion resistance, drinking grade, etc. Application: LIC ® hoses can be applied in the sanitary product: pex-b braided hose，pex-b ...

Inner diameter: 6.5 mm - 11 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 85 °C

... Compressed air spiral hoses made of polyurethane are equipped with rigid coiling fittings and a buckling protection. Special Features: high flow rates at allowable working pressures up to 10 bar / 145 psi (at room temperature) ...

Inner diameter: 12 mm - 58.9 mm
Pressure: 2 bar - 5 bar
Temperature: 0 °C - 100 °C

... Purpose TO grade hose (available in both GP and AS) is a lightweight hose, used in applications where working pressures are low and where there is no need for the physical protection offered by an external braid. TO grade tube ...

Pressure: 4,100 bar
Temperature: -40 °C - 70 °C

... Polyamide tubes type T-PA12 are for technical applications due to theirs characteristics of flexibility and mechanical performances. These tubes show high mechanical properties to traction and to continuous & alternate flexion, notable flexibility, good ...

Temperature: -20 °C - 80 °C

... silicone free Corresponding to the polyurethane hoses BizLink tube-fit PUR-line we offer diverse fittings, such as brass fittings, straight, 45° or 90° angled. The installation of self-locked polyurethane hose on fittings ...

Outer diameter: 15, 18, 22, 12, 28 mm
Pressure: 10, 20 bar
Delivered length: 3 m

... Nylon pipe designed for Air ring main applications John Guest Rigid Nylon pipe is designed for Air & Pneumatics applications. Features and benefits Hardwearing material Application Air Purpose Nylon pipe ...

Inner diameter: 20 mm - 630 mm

... properties, the pipe and fitting fuse to form a homogeneous, materially bonded unit. This results in maximum safety and service life. In combination with the extensive range of fittings, the system includes all components for the pipe ...

Inner diameter: 250 µm - 41,000 µm
Outer diameter: 600 µm - 44,000 µm
Temperature: -200 °C - 260 °C

... 25x28. Tubes can be cut at desired length. standard solutions are delivered in coils of 8 to25, 50, 100 m depending on tube diameter, bending radius and other technical restrictions. Extra lengths up to 500 m for 4x6 or 350 m for ...

Inner diameter: 38 mm - 500 mm
Outer diameter: 46 mm - 510 mm
Pressure: 0.08 bar - 0.63 bar

... to ISO 8031 electrical and surface resistance Technology / Technical Information / REACH DESIGN patented PROTAPE® tape hose 1. spring steel wire integrated in wall 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®) 3. ...

Inner diameter: 30 mm - 203 mm
Pressure: 10 bar - 28 bar
Temperature: -20 °C - 80 °C

... Hose for transfers, drainage, irrigation installations, sewage pumping, slurry and fertilizers, irrigation cannons, temporary installations (bypass), etc. Standard length: Available in 60m lengths. Other lengths on request (up to ...

Pressure: 0 MPa - 200 MPa

... inspection well (the pipeline can also be excavated on site to make inspection well or enlarge the hole of inspection well, which will not result in irreparable fracture like ordinary concrete). The same material can be used for the pipeline ...

Inner diameter: 6 mm - 32 mm
Outer diameter: 15.4 mm - 44 mm
Pressure: 28 MPa - 56 MPa

... radius is 50% lower than DIN EN853 standard; high-pressure-pressure is 30%~40% higher than DIN EN853 standard; long life. Hose Fitting：It adopts high-quality carbon structural steel, the core material is 45# steel, the nut material ...

Outer diameter: 100 mm - 200 mm

... The Kongskilde OK pipe systems (tube systems) are ideal for pneumatic and mechanical conveying The simple and flexible pipe systems may be adjusted to suit any specific purpose, resulting in shorter conveying distances ...

Inner diameter: 20 mm - 1,200 mm
Pressure: 4 bar - 16 bar

... standards: MT558.1-2005 Plastic Pipes in Coal Mining — Part 1: Polyethylene Pipes and MT181-1988 Code for the Test on Plastic Pipe Safety Property for Coal Mining. Specification and dimension: the nominal pressure, specification and ...

Outer diameter: 0.75 in
Pressure: 20 bar
Temperature: 0 °C - 25 °C

... SPECIFICATIONS : • - For washing machine • - Rubber pipe with plastic connection D.10 mm for flexible hose USE: • - Min Température Ts : 0°C • - Max Température Ts : + 25°C for flexible hose Ref. ...

Inner diameter: 4.4 mm
Outer diameter: 6, 8 mm
Pressure: 16 bar

... Name - HDPE Tubes Size Units - Metric Material - HDPE Color - Blue Working Pressure - 16 bar (235.2 psi) at +20° C Min Bend Radius - 30 mm Roll Length - 100 m Wall Thickness - 0.8 mm Outer Diameter - 6 mm ...

Inner diameter: 2 mm - 13 mm
Outer diameter: 4 mm - 16 mm
Temperature: -10 °C - 40 °C

... - Made of polyethylene (PE) - External calibration; for use with Eisele plug connectors - Free of plasticizer and halogen - Color: natural, black, red, blue, green, yellow, grey - Temperature range: -10 to +40 °C (14 to 104°F) ...