Oil pumps

Flow: 0.01 l/h - 18 l/h
Pressure: 10 bar - 250 bar

... , the hydraulic diaphragm metering pump ORLITA Evolution mikro EMFa is ideally suited to ultra-precise micrometering in a very wide range of processes. Typical applications include metering additives ...

Flow: 320 l/h
Pressure: 780 bar

... chamber is hermetically separated from the hydraulic part Integrated hydraulic relief valve and automatic bleed valve for the hydraulic chamber Wear-free, valveless enforced ...

Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, ...

Flow: 0 l/min - 77 l/min
Head: 0 m - 11.8 m
Power: 320 W

... up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil ...

Flow: 0 l/min - 244 l/min
Head: 0 m - 15 m
Fluid temperature: 100 °C

Food product pump - B200 Niro* | 0151-403 The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum ...

Flow: 0.01 l/min
Pressure: 38 bar

The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line systems of up to 20 lubrication points and a main line length of approximately ...

Flow: 0.1, 0.2, 0.5 l/min
Pressure: 30 bar

... line. MKF units are used in single-line systems to supply fluid greases NLGI 000 and 00. MKL units supply an oil and air mixture in oil and air lubrication systems. Features and benefits Integrated ...

Flow: 8, 14, 24 l/min
Pressure: 0 bar - 400 bar
Head: 120 m

The ZPU 08/14/24 pumps are used primarily in dual-line systems or as supply pumps and have a maximum operating pressure of 400 bar (5800 psi). Depending on the system layout, these electric pumps ...

Pressure: 0 bar - 80 bar

Piston Pump Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,04 Number of outlets: 1...6 Tank size in l: 0,125 / 0,25 / 0,38 / 0,4 / 0,5

Pressure: 0 bar - 350 bar

Piston pump in steel design Medium: oil / grease Dosing volume per stroke and outlet in cm³: 0,08 / 0,15 / 0,22 Number of outlets: 1...24 Tank size in l: 2...25

Pressure: 0 bar - 60 bar

Delivery Pump Medium: oil Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 Number of outlets: 1...4 Tank size in l: 0,7

Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F

... and secondary sludge • Mineral processing • Industrial chemicals, detergents, • Polyethlene glycol • Crude oil, hydraulic oil, waste oil • Starches, liquiefied potato ...

Flow: 225 m³/h
Pressure: 24 bar
Fluid temperature: -10 °C - 100 °C

... applications found in the oil and gas sector, where solids-entrained multiphase fluids such as drilling muds, drill cuttings and produced waters need to be transferred with a steady flow and low shear. The new API ...

Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 9 bar

... savings over conventional drive train designs and extends intervals between routine maintenance. Features & Benefits • Interchangeable components with the Epsilon and Compact C transfer pumps, ...

Flow: 35 l/min
Head: 8 m

... Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Technical data: Delivery ...

Flow: 80 l/min
Head: 12 m

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer ...

Flow: 50 l/min
Head: 13 m

Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, ...

Flow: 2,500 m³/h
Fluid temperature: 80 °C

The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...

Flow: 2,800 m³/h
Fluid temperature: 180 °C

... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...

Flow: 1,500 m³/h
Fluid temperature: 427 °C

... edition of API 610. The CUP-BB2 pumps are employed for many oil & gas, desalination, power, and general industrial applications. Stringent API noise and vibration limits are met due to a rigid pump ...

Flow: 0 us gal/min - 285 us gal/min
Pressure: 0 psi - 120 psi
Head: 20'06"

NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP! 3” NON-METALLIC PUMP MODEL ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...

Flow: 0 l/min - 14.8 l/min
Pressure: 0 bar - 103 bar

... Extrusion: 2-ball pumps generate pressure to handle extrusion of low-to medium-viscosity Lubrication: ARO® 2-balls pumps provide the flow and pressure required for moving light oils ...

Flow: 340.7 l/min

Features Designed with TOUGHNESS in mind. Move pump from location to location with it's compact, rugged design. Efficiency - Motor design delivers optimum air efficiency Reliability - ARO's patented 'Unbalanced' ...

Flow: 750 l/min - 4,500 l/min
Pressure: 3 bar - 8 bar

... lobe pump. As the rotational movement continues, the medium is then enclosed in cavities between the rotary lobes and pump housing and it is issued on the discharge side by the pumping chambers as they ...

Flow: 120, 90, 60 m³/h
Pressure: 10, 13, 18 bar
Fluid temperature: 200 °C

... lobe pump. As the rotational movement continues, the medium is then enclosed in cavities between the rotary lobes and pump housing and it is issued on the discharge side by the pumping chambers as they ...

... -quality and oil-lubricated mechanical seal and the fully welded housing are also positive features of the ProCapT. In addition, the pump has a more compact installation dimension compared ...

Flow: 4.1 l/min
Pressure: 4.137 bar
Power: 37 kW

... Proportional Control Valve Ultimate pressure control • Booster Pump Seamless installation • Soft Start Motor Eliminates voltage spikes • Compact Design Limited space requirements • Oil/Air ...

Flow: 34 l/min
Pressure: 3,000 bar
Power: 95 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...

Flow: 34 l/min
Pressure: 2,000 bar - 3,000 bar
Power: 124 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...

Flow: 40 l/min
Pressure: 3,000 bar
Power: 148 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...

Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m

... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...

Flow: 38 l/min
Pressure: 1.5 bar - 8 bar
Weight: 1.9 kg

Very compact and reliable polypropylene diaphragm pumps for medium to small volume transfer , dosing, spraying and dispensing a variety of fluids. Typical applications are transferring ...

Flow: 100 l/min
Pressure: 1.5 bar - 8 bar
Head: 7, 4.5 m

Air operated double diaphragm pumps for dosing, spraying, transferring, evacuating and distributing a wide variety of fluids. Ideal for standard applications with medium flow rates. Very robust metal pumps ...

Flow: 7 l/min
Pressure: 130 mbar
Power: 19 W

... speed control Outstandingly easy to use Small footprint to optimize workspace Maintenance-free Very compact, chemically resistant and oil-free diaphragm vacuum pump ...

Flow: 20 l/min
Pressure: 6 mbar
Power: 60 W

... extremely aggressive/corrosive gases and vapors Clean, 100% oil-free operation Chemically resistant, compact and oil-free diaphragm vacuum pump with ...

Flow: 21 l/min
Pressure: 2 mbar
Power: 135 W

Clean, 100% oil-free operation High suction speed, particularly in the low vacuum range Adjustable speed control Exceptionally quiet Chemically resistant, oil-free diaphragm pump ...

Flow: 48 l/min
Pressure: 7,000 bar

Our high-pressure pumps generate hydraulic pressure levels of up to 7,000 bar – with oil, water or special media – extremely safe and cost efficient. They are easy to handle and are ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

The NEMO® BY block pump, with its industrial design, is versatile and can be applied in environmental technology, the food and chemical industries, as well as in the oil & gas sector, both upstream and ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... ® SY progressing cavity pumps are employed in challenging applications for continuous, pressure-stable, gentle, and low-pulsation conveyance, as well as speed-proportional dosing, in almost every industry worldwide. These ...

Flow: 400, 1,000 m³/h
Pressure: 0 bar - 24 bar

... you to pump up to 1000 m³/h at pressures of up to 20 bar with ease. No challenge is too great: Efficient pumping of oil, gas, and water mixtures containing high solids is possible. This ensures safe and ...

Flow: 600, 575 m³/h
Head: 384, 365 m
Power: 0 kW - 300 kW

SEMI-AXIAL ELECTRIC PUMPS A pump which has been thoroughly and extensively tested and trialled even for extreme applications, such as in the oil and gas sector, designed to guarantee ...

Flow: 2,000, 2,400 m³/h
Head: 54, 50 m
Power: 132 kW

SUBMERSIBLE PUMPS FOR WASTE WATER SAER's experience and know-how in the clear water and submersible pumps field has led to the creation of this extensive, Italian-made range of pumps ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C

The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...

Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C

... close-coupled OEM model is also available. GP pumps are designed for use with IEC or NEMA flange motors. Pumping of: • Clean oil • Glycol • Vegetable oil • Solvents • Lube oil • ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0.5, 0.8, 16 bar
Fluid temperature: 250 °C

For refinery and petrochemical applications Petrochemical Duty PD are internal gear pumps designed for refinery and petrochemical applications, all pressure-containing ...

Flow: 0.5 l/h - 4,000 l/h
Pressure: 16 bar

The pump is available in the size 22 with cast iron housing. It is equipped with long-lasting, wear- and maintenance-free flexible joint without oil filling (prevents contamination of the media). Benefits ...

Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 48 bar

The progressing cavity pump serie WANGEN KL-S are basic products of Pumpenfabrik Wangen. The clear benefit is in the low lifecycle costs. This universally usable pump works with almost every low and extrem ...

Input diameter: 0.75 in

Pump Material: Polypropylene Shaft: Polypropylene Seals: depending on the support Range: approx. 0.3 l/stroke* Hose connection: ¾” The telescopic suction tube is adjustable from 500 to 950 mm and has a max diameter. 34mm.

Flow: 0.25 l/s
Input diameter: 53 mm

Material: cast iron pump body Seals: NBR Suction hose length: 1000 mm Therefore suitable for smaller containers and 200 liter drums. Pump complete with discharge arc and adapter for G 2" drums.

Input diameter: 19 mm

... 1.5m Drain pipe DN 19 x 4; 1.5m Range: approx. 0.25 l/stroke* Drum adapters with M 64x4 and G 2” are integrated into the pump housing, allowing for easy attachment in the drum.

Flow: 0.1 m³/h - 200 m³/h

Small size standardised models help to keep your production areas dry and clean. Use our Liquid-Conveyors for the easy and reliable suction and disposal of various liquids like oil or emulsion and even ...