Oil pumps

Pressure: 50 bar - 700 bar
Weight: 12 kg

... The foot pedal is operated in one movement and the system is activated and instead of manpower, it only serves to transfer oil to lifters. • Hydropneumati ...

Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

... ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, and reducing ...

Flow: 0.1 l/min - 2,400 l/min
Fluid temperature: -30 °C - 150 °C

... calls for reliable components. Whether in lubrication oil applications or in processing plants, a pump is required to work reliably and longlasting. Thanks to the extensive range of components and pump ...

Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C

... applications requiring the highest levels of operational accuracy and reliability. The features include: Hydraulic oil-operated diaphragms Double oil for hydraulics and mechanism lubrication ensuring ...

Flow: 0.6 m³/h - 15 m³/h
Pressure: 70 bar - 120 bar
Power: 15 kW - 75 kW

... High Pressure Plunger Pump The RONO high pressure plunger pump is a triplex piston pump and is used to convey various edible fat products through multipurpose process lines. The pump ...

Flow: 12 l/min - 302 l/min
Pressure: 35 bar - 890 bar
Length: 595 mm

... Syringe pump Nemesys ultra high pressure module High throughput and high pressure applications up to 890 bar Under our earth’s crust, which is millions of years old, not only has time left its mark, there is also enormous pressure. ...

Flow: 21 m³/h
Pressure: 25 bar

... conveying, pressurizing and spraying in the fuel system. It can be used as hydraulic pump to provide hydraulic power in hydraulic transmission system. It can be ...

Flow: 0 m³/h - 420 m³/h
Pressure: 0 bar - 72 bar

... cover permits removal of rags when this is an issue and the Epsilon range has shared componentry with the popular Compact C transfer pump, helping customers and stockists to reduce the inventory of replacement parts Features ...

Pressure: 0 bar - 25 bar

... Paint pumps / Varnish pumps Gear pumps or Rotary lobe pumps Steimel pumps for paints and varnishes are used in machines and plants for the production of pasty and ...

Flow: 0 m³/h - 450 m³/h
Pressure: 16 bar
Head: 0 m - 100 m

... series pumps has designed for pumping not including big particulars high temperature liquids. • TKF-K series pumps are air cooled type pumps. Pump and motor is connecting by coupling. ...

Flow: 10.5 l/s - 400 l/s
Head: 25.4 m - 94.2 m

... ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump with large ...

Flow: 8 l/min

... 22080 RINOX 80 Single-action stainless steel pump. Standard equipment for oil and antifrezee: rigid filling pipe, plastic ring nut for drums with PTFE gasket. ...

Flow: 20 m³/h - 500 m³/h
Pressure: 10 bar
Head: 10 m - 30 m

... environment with solids. • Bearings can be lubricated either by oil or grease depending on the operating conditions of the pump and environment. • Double and cartridge mechanical seal system design ...

Flow: 15 l/h - 480 l/h
Pressure: 10 bar - 200 bar
Power: 0.75 kW

... PTFE Diaphragm Hydraulic Metering Pumps Capacity range 10-400lph, 10-200bar JYSZ series hydraulic diaphragm pumps are an integrated pump that can offer precise dosing ...

... Oil pumps for internal combustion engines – conventional, variable and electrical Virtually all the engine makers use Pierburg Pump Technology oil pumps, customers including ...

Flow: 0 m³/h - 500 m³/h
Head: 0 m - 150 m

... Kirloskar GK(P) pumps are used for handling various types of chemical liquids. These pumps are manufactured to close tolerance and are of rigid construction. GK(P) pumps are mainly used in process industries. ...

... Equipment for transferring AdBlue from IBC that includes: Pump IBC support Manual nozzle 6 Meters impulsion hose Aspiration tube -Options: Automatic nozzle Digital flow meter SEC Connection ...

Flow: 0.09 us gal/h - 3.43 us gal/h
Pressure: 232 psi
Power: 18 kW

... Neptune NSP-M Series Solenoid Metering Pumps are manually-controlled models featuring an integrated vented head. • Capacity range to 3.96 gph (15 L/h), up to 232 psi (16 bar) • Wide range power supply 110 - 240 VAC, -10% / +5%, 50/60 ...

Flow: 400 m³/h
Pressure: 48 bar

... The N series is a flanged pump that is ideal for use in heavy-duty operations such as transporting raw, primary, secondary, and thickened sludge before the filter press. The unit has a rated flow capacity lesser than or equal to 400 m³/h ...

Flow: 57 l/min
Pressure: 10 bar

... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout and needle valve ...

Flow: 0 us gal/min - 160 us gal/min
Length: 450 mm
Width: 333.5 mm

... conductive acetal or conductive polyvinylidene fluoride (PVDF) pumps are not to be installed in applications where the pumps may be subjected to oil, greases and hydraulic liquids. ...

Flow: 0 m³/h - 2 m³/h
Head: 15 m
Fluid temperature: 0 °C - 60 °C

... fluids for this Atex pump range include; water, diesel, kerosene, Jet A1 fuel, petrol, alcohol, gas oil, solvents, toluene, acetone, trichloroethylene, white spirit and any other low viscosity compatible fluids. These ...

Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg

... The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex rubber lining ...

Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C

... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump and motor are ...

Flow: 7.5 l/min - 90 l/min

... Hand wing pump Double acting, with lever Body cast iron - innerparts brass-packing cotton/PTFE Female thread BSPP Operating temperatures up to 80° C Pumping water, oil and fuels Including lever. Sigma ...

Flow: 30,000 m³/h
Pressure: 2.5, 3.75 MPa
Fluid temperature: 105 °C

... )type series pump is new generation single stage double suction split casing centrifugal pump that is designed and produced by foreign advanced manufacturing technology of 1990’s 20th century. Application Area HS(V) ...

Flow: 0.8 l/min - 7 l/min
Pressure: 10,000 psi

... Compact three stage pump. The single valve block can be replaced by component FP-4, thereby allowing 2 or 4 tools to be driven simultaneously. Three stage induction motor driven so brushless. Oil ...

Flow: 0 m³/h - 20 m³/h
Power: 80 W
Length: 485 mm

... Marine Bilge Pump BK/BK-S Series BK-12 "NEW BILGE KING" Necessities for Boat • Auto-stop feature prevents dry running, increases pump performance and life. • Easy to use starter switch. Integrated ...

Flow: 17 m³/h
Head: 22 m
Power: 1,600, 2,200 W

... drainage installation in polyethylene or concrete manholes as grinder pump on sewage lifting units Scope of delivery pump with 10 m power cable all pumps without stand feet and ...

Weight: 13.2, 14.2 kg

... Heavy duty siphon & air hand-held pump Hand-held siphon pump Direct transfer pump Suitable for petrol, oil, diesel, water etc. Also acts as an air pump for ...

Flow: 30 m³/h
Head: 30.5 m
Power: 2.5 kW

... best-selling PD pumps feature non-turbulent flows, continuous dry running and automatic self-priming. Quality-engineered, these pumps are durable and are easy to operate and maintain and are among our ...

Flow: 15, 11, 6 us gal/min
Pressure: 307, 207, 172 Pa
Weight: 14.8, 17.2, 15.9 kg

... The Muncie Power S Series hoist pump was designed specifically for use on small single or tandem axle dump trucks. The S Series hoist pump features a roller bearing design and can be air, lever or ...

Flow: 0 m³/h - 31.8 m³/h
Head: 0 m - 435 m
Power: 0.37 kW - 5.5 kW

... reducing power consumption & thereby reducing cost of operation. The motors are filled with special food non-toxic dielectric oil, which lubricates the ball bearing and axial thrust bearings. It also offers insulation and thermal properties ...

Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C

... Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox for internal combustion ...

Flow: 5 l/min
Pressure: 2 bar - 7 bar
Head: 70 m

... New pump line with a brand new designing that offers reinforced pumping potentials. The updated designing provides even bigger performance provided with economy Benefits • Optimal performance • Economical air consumption, ecological ...

Flow: 0 m³/h - 42 m³/h
Head: 1.5 m - 16 m
Power: 0.75 kW - 1.5 kW

... fluids. It is also prohibited to position or to remove the pump by the electric cable. Maximum temperature of the pumped fluids: - Continuous duty: 50°C. Minimum pumping level: 10 cm. above the pump body. Maximum fluid ...

... setting of extremely small pressures. The technical data are based on an air inlet pressure of 8 bar. The pumps of course also function perfectly at low pressures. Krautzberger diaphragm pumps are also ...

Flow: 0 m³/h - 60 m³/h
Head: 0 m - 50 m
Length: 330 mm - 800 mm

... range. There is also a model with a special flange support for hydraulic motors for installation on tanker trucks. These pumps are suitable for transporting various types of liquid, such as oil, wine, ...

Flow: 8 m³/h - 260 m³/h
Power: 0 kW - 15 kW
Fluid temperature: 40 °C

... motor and water pump assembly into one, with simple structure, convenient installation remove, cover a small area, easy to use and maintain, safe and reliable operation, no water polluted, etc. Use Condition: The ...

Flow: 0.43 l/min - 30 l/min
Pressure: 465 psi - 42,500 psi
Width: 180 mm

... liquid pump for pressure testing, chemical injection and hydraulic power. Compact in size, minimal weight and ability to operate in many environments. Hydratron AZ-1 Single Acting Air Driven Liquid Pump ...