Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
... specific brackets, easy to create (DAV Tech can provide 3d models of the pumps). The small size and weight of the pumps therefore allows easy handling. PCP PUMP DRIVE PCP pumps can ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
... specific brackets, easy to create (DAV Tech can provide 3d models of the pumps). The small size and weight of the pumps therefore allows easy handling. PCP PUMP DRIVE PCP pumps can ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
... specific brackets, easy to create (DAV Tech can provide 3d models of the pumps). The small size and weight of the pumps therefore allows easy handling. PCP PUMP DRIVE PCP pumps can ...
DAV TECH Srl
Input diameter: 0.75 in
... Pump Material: Polypropylene Shaft: Polypropylene Seals: depending on the support Range: approx. 0.3 l/stroke* Hose connection: ¾” The telescopic suction tube is adjustable from 500 to 950 mm and has a max diameter. 34mm. ...
FLUIMAC
Flow: 0.25 l/s
Input diameter: 53 mm
... Material: cast iron pump body Seals: NBR Suction hose length: 1000 mm Therefore suitable for smaller containers and 200 liter drums. Pump complete with discharge arc and adapter for G 2" drums. ...
FLUIMAC
Input diameter: 19 mm
... 1.5m Drain pipe DN 19 x 4; 1.5m Range: approx. 0.25 l/stroke* Drum adapters with M 64x4 and G 2” are integrated into the pump housing, allowing for easy attachment in the drum. ...
FLUIMAC
Flow: 0 l/min - 25 l/min
Pressure: 8 bar
... Temperature max: - +110 C Pressure: - 8 bar Description: - Compact and small diaphragm pump in aluminium and cast iron, ideal for installation where it is little space Aluminium and cast iron ...
Flow: 0 l/min - 570 l/min
Pressure: 8 bar
... Pressure: - 8 bar Description: - Aluminium and cast iron pumps For transfer of pH-neutral fluids, both thin, thick, high solid content or abrasive. The aluminium and cast iron pumps are found in most fields; workshop ...
Flow: 0 l/min - 820 l/min
Pressure: 8 bar
... Pressure: - 8 bar Description: - Aluminium and cast iron pumps For transfer of pH-neutral fluids, both thin, thick, high solid content or abrasive. The aluminium and cast iron pumps are found in most fields; workshop ...
Flow: 1.3 l/min
Pressure: 238, 7 bar
Weight: 16 kg
... finish and a reduce of overspray. Applications General industrial finishing Woodworking and finishing Marine & Off-shore Oil & Gas Metal products and machinery Metal and steel protection Plastic finishing Main materials Anti-rust Fixatives ...
LARIUS SRL
Flow: 2.6, 198, 330, 462 l/min
Pressure: 3 bar - 104 bar
Fluid temperature: 80 °C
... High performance extrusion package designed to maximize plant’s production capacity and to pump high viscosity products. Advantages ▪ Atex certified Ex II 2 G c IIB T6 ▪ Direct suction from a wide range of drums ▪ Long lasting ...
LARIUS SRL
Flow: 462, 330, 198, 0.8 l/min
Pressure: 3 bar - 360 bar
Fluid temperature: 80 °C
... High performance extrusion package designed to maximize plant’s production capacity and to pump high viscosity products. Advantages ▪ Atex certified Ex II 2 G c IIB T6 ▪ Direct suction from a wide range of drums ▪ Long lasting ...
LARIUS SRL
Flow: 9 l/min
... accessible from the pump side - bypass line integrated into the pump body - suitable for oils up to 2000 cSt, corresponding to approx. SAE 140 at 20 °C Lubricant pump Visco-Flowmat ...
Flow: 21.5 l/min
Pressure: 3 bar - 8 bar
Flow: 28, 33 m³/h
Pressure: 10 mbar
Weight: 21 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air ...
Srl
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 35 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air ...
Srl
Flow: 60, 72 m³/h
Pressure: 10 mbar
Weight: 38 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air ...
Srl
Flow: 5, 2.7, 0.9, 2, 1.3 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite braid NBR flange O-ring, Viton® or PTFE seal ...
Pompes Japy
Flow: 2.7, 1.3, 2, 0.9 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile O-ring Seal: nitrile O-ring, NBR flange O-ring. Specifications ...
Pompes Japy
Flow: 2, 1.3, 2.7, 0.9 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover: bronze Inner mechanism: bronze Lever: bronze (brass as an option) Flange: bronze threaded oval Waterproofing: ...
Pompes Japy
Flow: 15 l/min - 800 l/min
Pressure: 100 bar - 210 bar
Head: 10 m
... requirements • Can run dry without damage • The maximum cinrconference of only 22 cm allows easy insertion even in narrow manholes and very small excavation sites • It can be operated by small power ...
DOA Hydraulic Tools Srl
Flow: 15 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 45 m
... requirements, can run dry without damaging it •The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber •Can be operated by small power packs ...
DOA Hydraulic Tools Srl
Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m
... spills of oils and oil products from “skimmers” into the sea and lakes SP35 is a 3 hydraulic waste pump for clear and heavily loaded liquids, impeller and shell are made in stainless ...
DOA Hydraulic Tools Srl
Flow: 4.33, 8.8, 22.44, 36.18 l/min
Pressure: 14.4 bar - 78.65 bar
... disassembly due to coarser threads The proven WIWA air motors continue to be used for the new low-pressure pumps. The main features of the material pumps are a follower piston packing, easy assembly and disassembly ...
Pressure: 32, 16, 48, 24 bar
Weight: 7.2, 8.1 kg
... Robust Reliable Suitable for different container sizes With our pneumatically driven piston pumps for transferring oil, you always have a reliable partner on hand. The robust 40 and 82 series have a 2'' bung fitting ...
Flow: 8 l/min - 13.4 l/min
Pressure: 90 bar - 172 bar
Power: 2.2 kW - 4 kW
... Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal operating Temperature High Quality Oversized Ball Bearings Optimal Oil Bath for High Speed Operation S 24mm Solid Shaft for Belt Drive, Gearbox or Flex Couplers ...
COMET Spa
... mbar. Chemistry-HYBRID pumps The RC 6 range of chemistry-HYBRID pumps are a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump. The diaphragm pump ...
Pressure: 700 bar
... Foot- pump with integral three-way directional control valve for supplying single-acting cylinders. A compact, portable, low-cost device equipped with 0.4 litre tank and having maximum operating pressure of 700 bar. Pedal-operated, it ...
OLMEC
Flow: 12 l/min
Pressure: 1.3 bar - 8 bar
... Dual effect heavy duty pneumatic piston pump for centralised systems, even for the most complex ones, for high viscosity oil. The possibility to adjust pressure from 0.3 bar to 8.5 bar guarantees great flexibility. ...
FILCAR
Fluid temperature: 0 °C - 120 °C
... environments. • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter. • The AP4+ air valves can pass 90 weight oil without fouling. • Able ...
QED Environmental
Flow: 103 m³/h
Pressure: 34 bar
... The enhanced design of Ampco’s patented ZP3 series positive displacement pumps is now leading the industry. It sets the standard for PD circumferential piston pump technology with a simplified yet state-of-the-art design ...
Pressure: 50 bar
Fluid temperature: 0 °C - 40 °C
... Overview
Pumps of the BEKA P series are pneumatically actuated piston
pumps designed for large-volume single-line lubrication with
oil or flowable greases. They are available as a
pump ...
Flow: 34 l/min
Pressure: 3,000 bar
Power: 95 kW
... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...
WOMA GmbH
Flow: 5 l/min
Pressure: 0.8 bar
Fluid temperature: 125 °C
... Clean oil free vacuum or pressure source, in a tough and compact polycarbonate case which conforms to IEC 1010 safety. • Whisper quiet, continous operation and ruggedly reliable. • Optional vacuum ...
CHARLES AUSTEN PUMPS LTD / BLUEDIAMOND PUMPS INC
Flow: 15 l/min
Pressure: 0.15 MPa
Power: 150 W
... We are expanding our hydraulic pump portfolio to include electric pumps for cooling, lubrication and ventilation systems. This new pump family will employ a modular design with pumping ...
Flow: 171.7 m³/h
Pressure: 344.7 bar
Fluid temperature: -40 °C - 93 °C
... 10:1 turndown ratio with smoother flow Precision stroke adjustment can be operated while the pump is running or stopped All gear components move in an oil bath for long life Steady State Accuracy ± 1% of full capacity ...
Williams Milton Roy
Flow: 500 m³/h
Pressure: 10, 16 bar
Head: 100 m
... Hot Oil Pump Hot oil pumps are specially designed to transport liquids at high temperatures. They are commonly used in industrial processes, heat transfer systems, and energy production. ...
EMSE POMPA
Flow: 0.5 l/h - 4,000 l/h
Pressure: 16 bar
... The pump is available in the size 22 with cast iron housing. It is equipped with long-lasting, wear- and maintenance-free flexible joint without oil filling (prevents contamination of the media). Benefits and Characteristics flexible ...
WANGEN PUMPS
Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW
... This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom ( oil). After the pump, ...
Dropsa spa
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven gear pump ...
Delimon
Flow: 12, 30, 16, 20 m³/h
Pressure: 3.5 bar
Power: 1.1, 1.5, 1.8 kW
... Tank Truck Eccentric Disc Pumps is a polyvalent heavy duty pump able to cover a wide range of applications. Depending on the construction, it can handle fuels, solvents, and waste products such oil, glycol ...
MOUVEX
the best suppliers