Flow: 0 m³/h - 173 m³/h
Pressure: 2, 3 bar
Head: 0 m - 18 m
... version) Design Submersible drainage pump Application Pumping of Wastewater Process water Equipment/function Connection cable with plug S version equipped with a float switch ...
Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m
Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...
Flowserve SIHI Pumps
Flow: 600 m³/h
Pressure: 16 bar
Head: 95 m
... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZHN are part of the overall ...
Flowserve SIHI Pumps
Flow: 600 m³/h
Pressure: 40 bar
Head: 90 m
... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZEN are part of the overall ...
Flowserve SIHI Pumps
Flow: 0 m³/h - 80 m³/h
Power: 0 W - 3,000 W
... generally classified as follows: oil and water emulsions, water-polymer solutions, and anhydrous synthetics. More specifically, the International Standards Organization (ISO) further classifies these fluids as follows: ...
Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar
... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...
NETZSCH Pumps & Systems
Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar
... The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the pump to be customized perfectly to your application case. Furthermore with ...
NETZSCH Pumps & Systems
Flow: 400, 1,000 m³/h
Pressure: 0 bar - 24 bar
... almost pulsation-free transport of crude oil, produced water, oil seawater and mud seawater, even over long distances. This protects your plant and avoids high maintenance and servicing costs. Especially ...
NETZSCH Pumps & Systems
Flow: 48 l/min
Pressure: 7,000 bar
Oil and Gas Technology - High Pressure Units and Components for Fluids High-pressure pumps and systems from Maximator allow reliable testing of pressurised hydraulic equipment and components in oil ...
Flow: 0 l/min - 520 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 350 °C
External gear pump ZPA The self-priming external gear pump ZPA is particularly suitable for uncritical media without fillers which are compatible to the used standard materials The pump ...
Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW
This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After ...
Dropsa spa
Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C
... on lubrication systems, with a working pressure of 4 bar This range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar. The pump can be provided with ...
Dropsa spa
Pressure: 3 bar
... number of the Single Line 01 distribution cylinders which the pump may supply continusly for a time of 5 minutes. Key features: - Flowrate: 15 cm3 / stroke (0,91 cu.in.) - Lubricant: oil, viscosity: ...
Dropsa spa
Flow: 0 m³/min - 0.2 m³/min
Head: 0 m - 9 m
Power: 0.15 kW
The OM-series is a submersible semi-vortex pump designed for handling household wastewater and liquid carrying small solid matters. The semi-vortex pump design with moderate solids passage ...
Flow: 21.5 l/min
Pressure: 3 bar - 8 bar
Fluid temperature: 18 °C
is a pump for transferring lube oil. Designed and developed for use in particular application fields, it has been created with the use of the most suitable materials to guarantee high performance and ...
PIUSI
Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...
Flow: 7.5 m³/h - 118.1 m³/h
Pressure: 200 psi - 300 psi
Length: 314 mm - 703 mm
Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard. Features: No shaft alignment necessary. No coupling guard required. Special base design enhances cleanability. Reduces ...
Flow: 2,000 m³/h
Pressure: 0 psi - 145 psi
... alignment of ports Product Benefits Pumps with flushed double mechanical seals can run dry indefinitely Very low shear, product not damaged during pumping No internal rotor contact Large fluid ...
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Flow: 12, 30, 16, 20 m³/h
Pressure: 3.5 bar
Power: 1.1, 1.5, 1.8 kW
... ® CC20 Series Tank Truck Eccentric Disc Pumps is a polyvalent heavy duty pump able to cover a wide range of applications. Depending on the construction, it can handle fuels, solvents, and waste products ...
MOUVEX
Flow: 15, 25, 40, 65, 110 m³/h
Pressure: 12 bar
Fluid temperature: 250 °C
... vane pumps can be dismantled without disconnecting the suction and discharge lines. Pump reassembly requires no special positioning Replacement parts are extremely competitive The pump ...
MOUVEX
Flow: 0 m³/h - 80 m³/h
Pressure: 8 bar
... excess pressure Unused shaft end is protected by a casing Compatible with diesel, heating oil, petrol, biodiesel paraffin, kerosene, oil heavy fuel and bitumen Compact ...
MOUVEX
Flow: 91 l/h - 910 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW
... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 910 l/h (240 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, ...
Albin Pump
Flow: 0.3 m³/h - 2.71 m³/h
Pressure: 1 bar - 4 bar
Power: 0.55 kW
... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 2,71 m3/h (12 gpm) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, ...
Albin Pump
Flow: 2.3 m³/h - 13.9 m³/h
Pressure: 1 bar - 4 bar
Power: 1.5 kW - 3 kW
... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 13,9 m3/h (61 gpm) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, ...
Albin Pump
Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm
... pressurizing oil, water or other fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x ...
Flow: 50 l/min
Pressure: 70 bar - 5,000 bar
The P-Series of air-driven pumps reduce maintenance downtime and provide reliability for pumping various liquids with pressure up to 72,500 psi (5,000 bars). The pumps operate with an automatic reciprocating ...
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable for Thermal oil heat transfer: OEM systems, maintaining temperature in jacketed equipment ...
Johnson Pump
Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m
... Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing Grease or oil bath lubricated bearings Suitable for Low viscosity, clean or slightly contaminated ...
Johnson Pump
Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m
... duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber and seal cartridges to API ...
Johnson Pump
Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C
The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...
DESMI Pumping Technology A/S
Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C
... close-coupled OEM model is also available. GP pumps are designed for use with IEC or NEMA flange motors. Pumping of: • Clean oil • Glycol • Vegetable oil • Solvents • Lube oil • ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 0.5, 0.8, 16 bar
Fluid temperature: 250 °C
For refinery and petrochemical applications Petrochemical Duty PD are internal gear pumps designed for refinery and petrochemical applications, all pressure-containing ...
DESMI Pumping Technology A/S
Flow: 8 l/min - 13.4 l/min
Pressure: 90 bar - 172 bar
Power: 2.2 kW - 4 kW
... Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal operating Temperature High Quality Oversized Ball Bearings Optimal Oil Bath for High Speed Operation S 24mm Solid Shaft for Belt Drive, Gearbox or Flex Couplers
COMET Spa
Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C
... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...
Siebec
Flow: 1.5 m³/h - 6.5 m³/h
Power: 250 W
Fluid temperature: 110 °C
... extremely strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...
Siebec
Flow: 9 m³/h - 18 m³/h
Power: 1,500 W
Fluid temperature: 110 °C
... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...
Siebec
Flow: 0.03333 m³/s
Head: 2 m - 42.5 m
Power: 1.1 kW - 12.5 kW
Submersible pump, with oil bath motor, for cooling and lubrication of the bearings and a double mechanical seal, oil bath (motor side) and water bath (pump side). Suitable ...
Flow: 5.5 l/min
Pressure: 160 mbar
Power: 60 W
... resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. It features a PPS head, PTFE-coated diaphragm and FFPM valves. Benefits Clean, 100% oil-free ...
KNF NEUBERGER
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 38 l/min
Pressure: 1.5 bar - 8 bar
Weight: 1.9 kg
Very compact and reliable polypropylene diaphragm pumps for medium to small volume transfer , dosing, spraying and dispensing a variety of fluids. Typical applications are transferring ...
SAMOA Industrial, S.A.
Flow: 100 l/min
Pressure: 1.5 bar - 8 bar
Head: 7, 4.5 m
Air operated double diaphragm pumps for dosing, spraying, transferring, evacuating and distributing a wide variety of fluids. Ideal for standard applications with medium flow rates. Very robust metal pumps ...
SAMOA Industrial, S.A.
Flow: 0 us gal/min - 15 us gal/min
Pressure: 7 bar
Head: 70 m
... GODD) pumps, featuring the broadest range of products to meet the needs of a wide variety of applications. Traditional AODD pumps are designed for use with air only. Over the years, oil ...
WARREN RUPP
Pressure: 25 bar - 250 bar
Fluid temperature: -20 °C - 80 °C
... Test equipment for fuel regulators and commercial aircraft Test benches for diesel injectors Fuel pumps for gas turbines Welding systems Lubricating oil supply for precision spindle ...
Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. The Epsilon Pump incorporates ...
NOV Inc.
Flow: 225 m³/h
Pressure: 24 bar
Fluid temperature: -10 °C - 100 °C
... applications found in the oil and gas sector, where solids-entrained multiphase fluids such as drilling muds, drill cuttings and produced waters need to be transferred with a steady flow and low shear. The new API ...
NOV Inc.
Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 9 bar
... savings over conventional drive train designs and extends intervals between routine maintenance. Features & Benefits • Interchangeable components with the Epsilon and Compact C transfer pumps, ...
NOV Inc.
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... by the fuel manufacturers and can be included when assessing the stability of components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity ...
KRACHT GmbH
Please specify:
Help us improve:
remaining