Slurry pumps

Flow: 70,000 m³/h
Pressure: 145 psi

... Warman® Q-Series Axial Flow Pumps model QCL model is a horizontal elbow design in fabricated construction with separate pump casing. The pump is designed for continous circulation of ...

Flow: 70,000 m³/h
Pressure: 145 psi

... Warman® Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel. Overview The Warman® Q-Series Axial ...

Flow: 10,000 m³/h
Pressure: 145 psi

The Warman® Q-Series Axial Flow Pumps are designed for continuous circulation of fluids. The QL model is a horizontal elbow design in cast construction. Overview The Warman® Q-Series Axial Flow Pumps ...

Flow: 870 l/min
Pressure: 6.2 bar

... pneumatic centrifugal pumps provide effective flow rates up to 230 gpm (870.5 lpm). Compact in size, these pumps are useful for dewatering trenches, holes, bilges, pits or other bodies ...

Flow: 2 m³/h - 100 m³/h
Pressure: 10 bar
Power: 0.75 kW - 90 kW

... the largest hose pumps around the world and can produce m³/h maximum flow. The unique roller design of Flowrox enables the pump to deliver 31 liters per single 360 degree rebellion with just 25 liters ...

Flow: 0.6 m³/h - 2 m³/h
Pressure: 16 bar
Power: 0.55 kW - 1.5 kW

... overheating even with high continuous flow rates. The pump operation is trouble-free and consistent. 16 bar high pressure as well as acid proof pump heads are also available. With Flowrox hose pumps ...

Flow: 0.6 m³/h
Pressure: 8.6 bar

... vapor lock. The Flowrox LPP-M pump has a security rating of NEMA 4x/IP66 and is furnished with an extraordinary Tube Failure Detection, which is intended to stop the pump if pump tube ...

Flow: 4 m³/h - 330 m³/h
Pressure: 10 bar
Head: 2 m - 100 m

The KWP-Bloc is a volute casing pump that is equipped with different impellers, non-clogging, open multi-vane, and free-flow. Capable of being installed horizontally, this single-stage pump is designed ...

Flow: 23 m³/h - 14,000 m³/h
Head: 5 m - 90 m

Design Premium design hard iron pumps for long wear life pumping severe slurries. The basic, single-wall construction and heavy section, hard metal wet end combined with the cartridge bearing assembly ...

Flow: 25 m³/h - 3,405 m³/h
Head: 5 m - 90 m

... is a hard rock pump used in heavy-duty slurry solutions, and mildly corrosive slurries. Equipped with a hydraulic wet end, composed of three components: namely the shell or casing, the ...

Flow: 0 l/min - 19 l/min
Pressure: 0 bar - 7 bar
Head: 4.4, 2.5 m

... Verderair VA08 non-metallic pump is a compact, air operated double diaphragm (AODD) pump suitable for small transfer/drum emptying or as a basic dosing pump. The VA ...

Flow: 0 l/min - 25 l/min
Pressure: 0 bar - 7 bar
Head: 3.7 m - 6.4 m

... Verderair VA10 non-metallic pump is a compact, air operated double diaphragm (AODD) pump suitable for small transfer/drum emptying or as a basic dosing pump. The VA ...

Flow: 0 l/min - 57 l/min
Pressure: 0 bar - 7 bar
Head: 4.5 m - 7.6 m

... Verderair VA15 non-metallic pump is a compact, air operated double diaphragm (AODD) pump suitable for small transfer/drum emptying or as a basic dosing pump. The VA ...

Flow: 110 m³/h - 1,000 m³/h
Power: 18 kW - 156 kW

DRAGFLOW HEAVY DUTY HYDRAULIC PUMPS Dragflow Hydraulic Subersible Dredging Pumps. Characteristics: - Pump provided of agitator to stir things up - High abrasion resistance -Wear parts ...

Flow: 75 m³/h
Head: 47 m
Power: 24 kW

Hydraulic pumps for dredging Submersible hydraulic pumps with agitator. Variable speed. Particularly suitable for dredging heavy or abrasive mixtures. These are the main features of our dredging pumps: - ...

Flow: 100, 150, 200 m³/h
Head: 5 m - 46 m
Power: 18 kW - 90 kW

Electric submersible dredge pumps. Slurry and mining pumps! Characteristics: Pump complete with standard agitator to put solids in suspension ready for pumping High ...

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW

... HSD Series of Electric Submersible Slurry Pump, manufactured by Tsurumi pumps, is designed as a submersible single-phase portable slurry pump. It is ...

Flow: 0 m³/min - 0.8 m³/min
Head: 0 m - 24 m
Power: 2 kW - 3 kW

The KTV-series of slurry-handling type is a submersible three-phase portable slurry pump. For smooth suction of settled matters, it is equipped with agitator. It is designed light in ...

Flow: 0 m³/min - 0.8 m³/min
Head: 0 m - 24 m
Power: 2 kW - 3 kW

The KTD Series is an electric submersible slurry pump developed by Tsurumi Pumps. It is built with 3-phase, cast iron, heavy duty construction, and slim framework. The system is also ...

Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 15 bar

The SR1, manufactured by Ragazzini, produces flow rates of up to 80 m3/h and pressures of up to 15 bar. Furthermore, it has a hose diameter of 114 mm.

Flow: 0 m³/h - 90 m³/h
Pressure: 0 bar - 15 bar

The SR2, manufactured by Ragazzini, produces flow rates of up to 90 m3/h and pressures of up to 15 bar. Furthermore, it has a hose diameter of 127 mm.

Flow: 0 m³/h - 152 m³/h
Pressure: 0 bar - 8 bar

The DR1 series operates with 152 cubic meter per hour flow rate, and 8 bar pressure rating. Its hose fitting measures 114 mm in diameter.

Flow: 23 l/h - 1,785 l/h
Head: 15 m - 25 m
Power: 0.18 kW - 0.75 kW

FIXED CAPACITY Flow-rates:23 - 1785 l/h Head:15 - 25 mt Motors:0,18 - 0,75Kw

Flow: 3.2 l/h - 1,280 l/h
Head: 15 m - 25 m
Power: 0.22 kW - 0.75 kW

VARIABLE CAPACITY WITH GEARED MOTOR Flow-rates:3,2 - 1280 l/h Head:15 - 25 mt Motors:0,22 - 0,75Kw

Flow: 1.5 m³/h - 1,785 m³/h
Head: 15 m - 30 m
Power: 0.18 kW - 0.75 kW

VARIABLE CAPACITY WITH ELECTRONIC FREQUENCY VARIATOR Flow-rates:1,5 - 1785 l/h Head:15 - 30 mt Motors:0,18 - 0,75Kw

Flow: 0 m³/h - 400 m³/h
Pressure: 0 bar - 24 bar

... substances are conveyed gently and under low pulsation. In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. The NEMO® BY also differentiates itself by ...

Flow: 0 m³/h - 200 m³/h
Pressure: 0 bar - 48 bar

... elements, the pump housing is designed with an enlarged, rectangular hopper and conical force-feed chamber as well as a special coupling rod with a patented, horizontally positioned feeding screw. In block construction ...

Flow: 0 m³/h - 200 m³/h
Pressure: 0 bar - 48 bar

For highly viscous, compacted and crumbly substances that have a tendency to bridge, the NEMO® BP Progressing Cavity Pump is the optimal solution. The NEMO® BP can be used in nearly all branches of industry to provide ...

Flow: 610 l/min
Pressure: 2 bar - 6 bar
Head: 5 m

Diaphragm pumps R. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

Flow: 610 l/min
Pressure: 2 bar - 6 bar
Head: 5 m

Diaphragm pumps R. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

Flow: 170 l/min
Pressure: 2 bar - 6 bar
Head: 5 m

The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models have been designed ...

Flow: 1.6 m³/h - 187 m³/h
Pressure: 200, 250, 300, 450 psi

... of the SP (starch pump) Universal 2 Paper Industry Pump in paper mill applications: Pumps filled with settled slurries will start without damaging pump ...

Flow: 200 m³/h
Pressure: 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Flow: 8,300 m³/h
Pressure: 6, 4 bar
Head: 10 m

The typical pump for large capacity at low discharge heads (axial impeller). Available welded or solid cast, as required. Axial Flow Pump Applications Vaporisation plants Reactor loops Crystallisation ...

Flow: 35 l/s
Pressure: 10 bar
Head: 30 m

Patented Vortex Pump with a hybrid impeller. Combines the advantages of our semi-open impeller with those of a Turo® vortex impeller. Applications * Sewage sludges in wastewater technology * Grinding oil emulsions ...

Flow: 1,200 m³/h
Pressure: 10 bar
Head: 100 m

... of horizontal, single-stage volute casing pumps are designed according to ISO2858 / EN22858 and enlarged sizes and feature full dismantling of the bearing unit towards the drive end without removing the pump ...

... -rag and maintain a PC pump in-situ, eliminating the costly maintenance and down time that servicing can often cause. Applications Saltwater Disposal Truck Offloading Domestic and industrial effluent Hydrated lime slurry Sludge Shear ...

Pressure: 10 psi - 30 psi

The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps ...

... designed to handle highly viscous materials, such as sludges, slurries, thick non-flowing pastes and de-watered sludge cake with viscosities up to 1,000,000cP. Description This transfer pump ...

Flow: 2 m³/h - 25 m³/h
Pressure: 0 bar - 5 bar
Power: 1.5 kW - 5.5 kW

... certificate Application areas : WATER TREATMENT : Sewage Thickened, Sludge Dewatered, Sludge Clarifier, Waste Activated Sludge, Digested Sludge, Primary Sludge, Lime Milk, Raw Sludge ...

Flow: 17 m³/h - 120 m³/h
Pressure: 0 bar - 5 bar
Power: 3 kW - 30 kW

... certificate Application areas : WATER TREATMENT : Sewage Thickened, Sludge Dewatered, Sludge Clarifier, Waste Activated Sludge, Digested Sludge, Primary Sludge, Lime Milk, Raw Sludge ...

Flow: 90 m³/h - 300 m³/h
Pressure: 0 bar - 5 bar
Power: 11 kW - 55 kW

... certificate Application areas : WATER TREATMENT : Sewage Thickened, Sludge Dewatered, Sludge Clarifier, Waste Activated Sludge, Digested Sludge, Primary Sludge, Lime Milk, Raw Sludge ...

Flow: 66 m³/h
Pressure: 1.825 bar
Head: 18.25 m

Flow: 0 m³/h - 5,000 m³/h
Head: 0 m - 73 m

The slurry pump is a type of centrifugal pump, designed for pumping liquid containing solid particles in mining, metallurgy,coal washing ,sewage water treatment,power plant,dredging.and ...

Flow: 12.6 m³/h - 5,400 m³/h
Pressure: 0.6 bar - 7 bar
Head: 6 m - 68 m

SH pump series are horizontal, cantilevered, single-stage centrifugal pump. It is designed for pumping tough slurries which is high-abrasive or corrosivre and high-density. The horizontal ...

Flow: 10.8 m³/h - 4,860 m³/h
Head: 5 m - 52 m
Power: 15 kW - 1,200 kW

Rubber Lined Slurry Pump Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type ...

Flow: 16.2 m³/h - 1,008 m³/h
Head: 25 m - 94 m
Power: 30 kW - 560 kW

The SHH series High Pressure Slurry Pump is designed for the continuous pumping of highly abrasive, high density slurry with high pressure. It is also called High Head Slurry ...

Flow: 50 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...

Flow: 100 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...

Flow: 12 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...

Flow: 165 m³/h
Head: 21.3 m
Power: 16 kW

... indefinite dry running ability, the Selwood Seltorque range of vortex pumps form the foundation upon which the company's international reputation has been built. One of Selwood's original pump designs, ...

Flow: 208 m³/h
Head: 25 m

... Range’ pumps are the marketleader when it comes to solids handling. The vortex-flow design (Seltorque®), Selprime® automatic self-priming, emission compliant engines and ease of operation means troublefree pumping of S ...

Flow: 320 m³/h
Head: 21.3 m
Power: 32 kW

... indefinite dry running ability, the Selwood Seltorque range of vortex pumps form the foundation upon which the company's international reputation has been built. One of Selwood's original pump designs, ...

Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...

Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m

... design, suitable for sewage ,waste water, sludge drainage. 4. Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust ...

Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m

... design, suitable for sewage ,waste water, sludge drainage. 4. Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust ...

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks

Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications

Flow: 0.5 l/s - 8 l/s
Head: 1 m - 57 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / High manometric head Clean, rain and seepage water Suitable for applications in agriculture, irrigation and fish farming

Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar

Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar

Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid ...

Flow: max 13.0 m³/h
Pressure: max 15.0 bar

... fluid pumping highly abrasive eg for pumping slurry in the ceramics industry: the peristaltic pump rpt advantageously replace a pneumatic pump usual membrane safe. Your application can ...

Flow: 90 m³/h - 8,000 m³/h
Head: 10 m - 50 m
Power: 2.5 ch - 13 ch

... building material and other industries. They can be used as Circulating Pump of FGD Absorbing Tower, Limestone Slurry Pump, Gypsum Slurry Pump, Waste ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua ...