- Hydraulics - Pneumatics >
- Pump >
- Fuel pump
Fuel pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, hydraulic oil, machine oil and ...
Lutz Pumpen GmbH
Flow: 0 l/min - 60 l/min
Pressure: 6 bar
Head: 0 m - 36 m
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, hydraulic oil, machine oil and ...
Lutz Pumpen GmbH
Flow: 0 l/min - 40 l/min
Pressure: 6 bar
Power: 500 W
... joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. ...
Lutz Pumpen GmbH
Flow: 80 l/min
Head: 12 m
Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, ...
FLUX-GERÄTE GMBH
Flow: 240 l/min
Head: 13 m
The horizontally installed, compact container pump MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can ...
FLUX-GERÄTE GMBH
Flow: 120 l/min
Head: 26 m
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump ...
FLUX-GERÄTE GMBH
Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar
The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless steel, and hastelloy-C ...
ARO, Ingersoll Rand
Flow: 110 l/min
... Designed specifically for dispensing petroleum-based fuel Meet UL-79 specification code Compatible with gasoline, diesel fuel, kerosene, aviation fuel, ...
ARO, Ingersoll Rand
Flow: 284 l/min
... Designed specifically for dispensing petroleum-based fuel Meet UL-79 specification code Compatible with gasoline, diesel fuel, kerosene, aviation fuel, ...
ARO, Ingersoll Rand
Flow: 0 l/h - 60 l/h
Pressure: 0 bar - 10 bar
Head: 0 m - 10 m
Water Treatment Fertigation, Chemigation & Dosing Controls & Digital Groundwater Management Drip, Micro Spray & Soaker Hose Irrigation Frost protection Groundwater transfer Livestock & Wildlife ...
Pressure: 1.5 MPa - 28 MPa
Weight: 40 kg - 105 kg
These pumps realize highly intensified outputs by adopting a cradle swash plate. Products in the range from 50 to 130 cc/rev are brought together as a series.
Daikin PMC
Flow: 1 m³/h - 1,400 m³/h
Pressure: 0 bar - 40 bar
Head: 3.5 m - 236 m
Horizontal seal-less volute casing pump in back pull-out design, with magnetic drive, to DIN EN ISO 2858 / ISO 5199, with radial impeller, single-entry, single-stage. ATEX-compliant version available. Main Applications Chemical ...
Flow: 32 l/min
Pressure: 1.2, 0.8 bar
Weight: 5.43 kg
... EXGO! stands out for its intrinsic features: * small sizes; * remote control; *continuous duty cycle; * built-in bypass valve; * ATEX certification. Compact and sturdy, EXGO! is an ATEX vane ...
PIUSI
Flow: 0 l/min - 50 l/min
Power: 250 W
Fluid temperature: 23 °C
... a transfer pump suitable for flammable fuels such as gasoline, kerosene and diesel. It is easy to use, versatile, and compact and adapts to your requirements: you can use it wherever ...
PIUSI
Flow: 100 l/min
Pressure: 0 bar - 2.5 bar
Power: 1,125, 1,035, 874 W
... for flammable fuels such as Gasoline, kerosene and diesel. It is simple to use, compact, versatile and adapts to any working conditions: you can use it wherever you need it most. ATEX CERTIFIED QUALITY The PIUSI ...
PIUSI
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m
... 1” (25 mm) Air Operated Double Diaphragm Pumps made of cast metal can reach a flow rate of up to 200 l/min (52 gal/min) and they offer a wide range of construction materials and porting configurations. The pump ...
SAMOA Industrial, S.A.
Flow: 760 m³/h
Fluid temperature: 454 °F
The ClydeUnion Pumps direct acting pumps are designed with exceptional versatility to efficiently meet the requirements of a wide variety of pumping applications. These units are ruggedly designed for ...
celeros
Flow: 800 m³/h
Pressure: 20 bar
Fluid temperature: -40 °C - 200 °C
... Inboard bearing pumps suitable for lubricating liquids, such as Lube Oils, and clean Fuel Oils. API 676 AND OTHER SPECIFICATIONS Plenty Twinro pumps can be supplied in accordance ...
celeros
... Coastal Waters and Ports. Plenty Mirrlees TRIRO pumps have for many years successfully served the marketplace in pumping the Heavy Fuel Oils that powered the world's shipping. With the requirements to ...
celeros
Flow: 480 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-112 with membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK AND INDUSTRIAL ...
RAASM SpA
Flow: 610 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-2 with multi ported inlet/outlet, membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE ...
RAASM SpA
Flow: 170 l/min
Pressure: 8 bar
Fluid temperature: 65 °C
Diaphragm pump in aluminum and polypropylene series APPB-1 with 1" flanges, membranes in EPDM, balls in acetal and seats in AISI 316 stainless steel FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE | WINDSHIELD FLUID | WATER ...
RAASM SpA
Input diameter: 19 mm
Output diameter: 19 mm
... an easy fixing in drum. APPLICATION: Fire brigade hand pump ATEX compliant, single-acting hand pump that can be used for following media of hazard classes A I-III: Diesel, heating oil, fuel, ...
Flow: 0 m³/h - 3.5 m³/h
Head: 7.5 m
Power: 0.12 kW
Magnetic drive centrifugal pumps Intel connections: 1" F Outlet connections:1/2" M Max. Delivery head:7,5 mts Max Viscosity:100 CPS Impeller:closed
Flow: 0 m³/h - 7 m³/h
Head: 8.5 m
Power: 0.25, 0.37 kW
Magnetic drive centrifugal pumps Intel connections: 1" F Outlet connections:3/4” M Max. Delivery head:8,5 mts Max Viscosity:150 CPS Impeller:closed
Flow: 20, 35, 70, 130 l/min
Pressure: 0 bar - 7 bar
Weight: 6.9, 2.5, 3.6 kg
... along with a compact build and feathered flap valves that cut down noise enable it to be the perfect machine for OEMs - original equipment manufacturers. Notwithstanding that, anyone using the normal AODD pumps ...
Flow: 0 us gal/min - 45 us gal/min
Pressure: 8.6 bar
Head: 70 m
This 1" UL-compliant pump is designed to meet UL79 standards for diaphragm pumps handling flammable liquids. The U1F AODD pump features all-aluminum construction with approved nitrile ...
Pressure: 25 bar - 250 bar
Fluid temperature: -20 °C - 80 °C
... T3 and T4 Can be used with variable-speed drives Applications Test equipment for fuel regulators and commercial aircraft Test benches for diesel injectors Fuel pumps ...
Flow: 0 m³/h - 3.5 m³/h
Pressure: 0 bar - 5 bar
Fluid temperature: 0 °C - 70 °C
... required, these self priming pumps can achieve suction lifts up to 8 metres on water. Mono’s CB/SB, G, M and CP Range pumps provide an economic answer to many pumping duties. Simple design and construction ...
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
KRACHT GmbH
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... Type KF-F transfer pumps were developed specifically for use with fuels, especially for marine fuels. These need to be critically considered, especially regarding the lubricity. And ...
KRACHT GmbH
Flow: 120 m³/h - 1,000 m³/h
Pressure: 4, 20 MPa
Head: 70 m - 600 m
... NIKKISO canned motor pump is specifically used in the chemical industry for transfer and circulation tasks. The pump and motor are integrated in the sealed leak-proof structure of the canned motor pump. ...
Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar
... time required so far. NEMO® progressing cavity pump: Save costs due to FSIP® design In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. ...
NETZSCH Pumps & Systems
Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar
... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...
NETZSCH Pumps & Systems
Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar
... The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the pump to be customized perfectly to your application case. Furthermore with ...
NETZSCH Pumps & Systems
Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m
ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Flow: 8 l/min - 175 l/min
Pressure: 0 bar - 16 bar
... ACE OptiLine pump is used for a number of different fluids: Fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids, polymers, emulsions and any non-aggressive fluid with sufficient lubricating ...
IMO AB
Flow: 10 l/min - 1,200 l/min
Pressure: 0 bar - 16 bar
Magnetic coupled. Sealless. Leak-free pumps. Optimal MGO and heavy fuel oil applications in the marine industry. IMO OptiLine magnetic coupled pumps, also called magnetic ...
IMO AB
Flow: 10 l/min - 42 l/min
Pressure: 0 bar - 7 bar
The ACD pumps come in two executions; Lube Line and Fuel Line. The main difference is the shaft seal design; V-seal - optimized for light duty and T-seal - heavy duty respectively. The ACD pump ...
IMO AB
Flow: 150 l/h - 4,400 l/h
Pressure: 4, 4.5 bar
Power: 0.12 kW - 1.1 kW
Mouvex® TM Series Eccentric Disc Pumps are ideally suited for intensive-duty applications such as the transfer of heating fuels and heavy fuels. Known for their legendary ruggedness, ...
MOUVEX
Flow: 0 m³/h - 80 m³/h
Pressure: 8 bar
Mouvex® CC8 Series Rotary Vane Pumps are vehicle-mounted solutions for loading and unloading petroleum products for trucks and transports. These pumps are ATEX certified and compact, and feature an integrated ...
MOUVEX
Flow: 0 m³/h - 42 m³/h
Pressure: 10, 5 bar
Power: 0 kW - 10 kW
... Series Rotary Vane Pumps have been developed as vehicle-mounted solutions for loading and unloading petroleum products for trucks and transports. These pumps include all the same cutting-edge features ...
MOUVEX
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable for Thermal oil heat transfer: OEM systems, maintaining temperature in jacketed equipment Marine and Floating ...
Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m
... duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber and seal cartridges to API ...
Flow: 0 m³/h - 50 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: 180 °C
... TopGear Bloc pumps run on direct drive motor speed, offering an economical solution for pumping low viscous, non-abrasive media. The compact design allows quick and easy installation in areas where available ...
Flow: 0 m³/h - 250 m³/h
Pressure: 0.5, 0.8, 16 bar
Fluid temperature: 250 °C
... Petrochemical Duty PD are internal gear pumps designed for refinery and petrochemical applications, all pressure-containing components are carbon steel. Design pressure according to ANSI 300 Lbs or Pn40. Pumping of: • ...
Flow: 0 m³/h - 730 m³/h
Pressure: 12 bar
Head: 115 m
... the pumps are suitable as: • Bilge pumps • Ballast pumps • Fire pumps • Cooling water pumps • Wash-deck pumps • Fuel ...
Flow: 0 l/min - 52 l/min
Head: 0 m - 16 m
Power: 0.14 kW - 0.63 kW
Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements for pumping water without ...
Flow: 0 l/min - 45 l/min
Head: 0 m - 45 m
Power: 0.25 kW - 1.06 kW
... coolants fuel oil - Kinematic viscosity - - ...12 mm²/s (12 cSt) - Pumping temperature - - 0...80° C - Suction height - - 2 m without foot-located valve 6 m with foot-located valve - Construction Pump ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining