Transfer pumps

Flow: 0 l/min - 30 l/min
Power: 700 W

Pre-assembled progressive cavity pump kit with progressive cavity  pump VISCOPOWER F 570 and planetary gear for food and pharma to pump thin to medium viscous media up to 25.000 mPas ...

Flow: 12 l/min - 60 l/min
Head: 8.5 m

... Seal: sealless ► Container: Small containers, Hobbocks, 200 l drums Product attributes ► Connection motor and pump via quick-action coupling ► Small outer tube diameter ► Holding ...

Flow: 17 l/min - 47 l/min
Head: 6.8 m

The small drum pump JUNIORFLUX F 310 with fixed motor FEM 3070 and mechanical seal is especially suitable for pumping comparatively small quantities out of containers such as canisters ...

Flow: 6,700 m³/h
Fluid temperature: -13 °C - 93 °C

Air-operated Diaphragm Pump Duodos for pumping liquid media. Duodos pumps are air-driven double diaphragm transfer pumps. No electrical components are required. The ...

Flow: 80, 100, 25, 35 m³/h
Pressure: 8, 4, 10, 6 bar

... environments. Your benefits Compact pump with good pump capacity Ideal for viscous, abrasive and shear-sensitive media containing solids High-grade seals and the reliable separation ...

Flow: 2.4 l/h - 12,000 l/h
Pressure: 3 bar - 12 bar
Power: 0.37 kW - 2.2 kW

The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering. Pump ultra-gently, meter ...

Flow: 0.8, 2.24, 6 l/min
Pressure: 50 bar - 160 bar
Length: 338, 577, 600, 860 mm

Transfer pumps: Feed material directly from original containers Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer ...

Flow: 0 us gal/min - 0.29 us gal/min

GTP-C Grease Transfer Pump For grease drums of up to 180 kg/216 l (55 gal/400 lb) To use the GTP-C, simply turn on the main switch located on the terminal box. The function status is shown by two LEDs, ...

Flow: 0 m³/min - 0.25 m³/min
Pressure: 100 bar

GTP Grease Transfer Pump For 25-kg/30-l grease drums Pump frames for grease drum sizes of 50 to 200 kg are available on request. The pump is ready for operation after ...

Flow: 0 m³/s - 0.00038 m³/s
Pressure: 0 Pa - 700,000 Pa
Input diameter: 1, 1.5 in

The Maple Pump is our advanced, air operated, horizontal piston pump for automotive and general industrial applications. This range of precision engineered pumps is designed to handle ...

Flow: 0 us gal/min - 22 us gal/min
Pressure: 0 psi - 125 psi
Head: 17'00"

Available in aluminium and stainless steel this versatile 1 air operated double diaphragm pump is ideal for pumping a variety of waterborne and solvent based coatings including; Adhesives, catalyzed varnishes, paints, ...

Flow: 8.4 l/min
Pressure: 7, 21 bar
Fluid temperature: 0 °C - 40 °C

Diaphragm Pump Air operated 3:1 diaphragm pump The Binks DX200 3:1 pump has been designed to perform in tough spray gun, system or transfer applications Overview The ...

Flow: 0 l/min - 22 l/min
Head: 0 m - 6.7 m
Power: 200 W

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump ...

Flow: 22 l/min
Head: 0 m - 6.7 m
Power: 200 W

... cleaning agents Description: The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and ...

Flow: 0 l/min - 22 l/min
Head: 0 m - 12 m
Power: 260 W

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible ...

Flow: 70,000 m³/h
Pressure: 145 psi
Head: 9 m

... Warman® Q-Series Axial Flow Pumps model QCL model is a horizontal elbow design in fabricated construction with separate pump casing. The pump is designed for continous circulation of ...

Flow: 10,000 m³/h
Pressure: 145 psi
Head: 9 m

The Warman® Q-Series Axial Flow Pumps are designed for continuous circulation of fluids. The QL model is a horizontal elbow design in cast construction. Overview The Warman® Q-Series Axial Flow Pumps ...

Flow: 18,180 m³/h
Pressure: 125 psi
Head: 32 m

... 4,000 specially designed Warman® FGD pumps. Realising that modern flue gas absorber technology would require new and innovative pump designs, Weir Minerals developed the new high performance Warman® GSL ...

Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar

The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless steel, and hastelloy-C ...

Flow: 0 us gal/min - 285 us gal/min
Pressure: 0 psi - 120 psi
Head: 20'06"

NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP! 3” NON-METALLIC PUMP MODEL ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...

Flow: 0 l/min - 20 l/min
Pressure: 0 bar - 8.6 bar

Part of our Compact Series of pumps, our 1/4” pumps feature big performance in a compact package. They feature flow rates up to 5.3 GPM (20 LPM), a wide range of material ...

Flow: 3 l/h - 58,000 l/h
Pressure: 250 bar
Fluid temperature: 350 °C

Gear pumps for pressure increase The reliable pressure increase pump for the polymer process. BOOSTER gear pumps from WITTE are used in the polymerization process to increase the ...

Flow: 20 l/h - 170,000 l/h
Pressure: 15, 120 bar

Gear pumps for chemical applications CHEM gear pump to transport and dose low to medium viscous media. The application range reaches from classic transfer and dosing tasks in the ...

Pressure: 0 bar - 120 bar
Fluid temperature: 300 °C

Mini gear pumps for pumping and fine dosing of low to medium viscosity fluids CHEM MINI - dosing pump for the finest dosing tasks The CHEM MINI gear ...

Flow: 4 us gal/min - 16 us gal/min
Pressure: 0 bar - 85 bar
Head: 0 m - 4 m

... AstiPure II pumps have pumping rates ranging from 4 GPM to 16 GPM. For higher flow rates, we offer the time-proven PFD4 pump, which offers flow rates as high as 26 GPM. For abrasive slurries, special ...

Flow: 4 us gal/min - 16 us gal/min
Pressure: 0 bar - 85 bar
Head: 0 m - 4 m

... AstiPure II pumps have pumping rates ranging from 4 GPM to 16 GPM. For higher flow rates, we offer the time-proven PFD4 pump, which offers flow rates as high as 26 GPM. For abrasive slurries, special ...

Flow: 0.00001 l/min - 0.00081 l/min

The pump drive of the model 120 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are ...

Flow: 0.002 l/min - 0.00406 l/min

This model has a flow rate of 2.0 — 4,056 ml/min and is designed for operation with single-channel pump heads. The analog interface makes it possible that all functions can be controlled externally. A control accuracy ...

Flow: 0 l/h

The compact ViscoTec Dispenser 4RD6-EC ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, consistent and reliable ...

Pressure: 40 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Flow: 54 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m

... offer a wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. PIVOT Series 1/2” AODD pumps make the difference ...

Flow: 54 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m

... non-metallic pumps are available in materials such as Polypropylene, Conductive Polypropylene, Conductive Acetal and PVDF offers an extensive range of diaphragms. They offer a wide range of applications and fluid compatibility. ...

Flow: 38 l/min
Pressure: 1.5 bar - 8 bar
Weight: 1.9 kg

Very compact and reliable polypropylene diaphragm pumps for medium to small volume transfer , dosing, spraying and dispensing a variety of fluids. Typical applications ...

ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides ...

Flow: 11 l/min - 17 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m

CUBIC 15 diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids. Especially suitable in ...

Flow: 0 l/min - 6 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

MIDGETBOX diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids. Especially suitable in ...

Flow: 6 l/min - 9 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m

BOXER 7 diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids. ■ Product designed and ...

Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m

... seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable for Thermal oil heat transfer: OEM systems, ...

Flow: 0 m³/h - 48 m³/h
Pressure: 0 bar - 7 bar
Fluid temperature: 120 °C

... multipurpose peripheral flow AODD pump The TopAir series is one of the most complete lines of Air Operated Double Diaphragm pumps on the market. With eight sizes up to 800 l/min in a wide range of ...

Flow: 0 m³/h - 10 m³/h
Head: 0 m - 92 m
Power: 0 kW - 2.2 kW

Priming via VENTURI system in the pump body. Ideal for use in heating/cooling systems, water supply, irrigation and the distribution of water with autoclaves. Materials: stainless steel, brass, plastic.

Flow: 0 m³/h - 18 m³/h
Head: 0 m - 96 m
Power: 0 kW - 7.5 kW

The opposing impellers on the same motor shaft guarantee perfectly balanced axial hydraulic thrust, avoiding overloading of the motor bearings. Applications: water distribution, irrigation, HVAC.

Flow: 0 m³/h - 4,000 m³/h
Pressure: 0 bar - 200 bar
Head: 40 m - 4,000 m

... tank or for fixed installation in tankers. Optimal selection of pump components Pump components are selected so that all combinations of discharge and pressure are observed. Optimum pump ...

Flow: 120 m³/h - 1,000 m³/h
Pressure: 4, 20 MPa
Head: 70 m - 600 m

... NIKKISO canned motor pump is specifically used in the chemical industry for transfer and circulation tasks. The pump and motor are integrated in the sealed leak-proof structure of the ...

Flow: 30, 50 l/min
Pressure: 1.5 bar
Power: 300, 310, 80 W

... 30 minutes. BP 3000 diesel transfer pump is equipped with a vane motor with a sintered rotor and acetal resin vanes that ensures greater power and precision in the dispensing phase. The By-Pass valve ...

Flow: 100, 70 l/min
Pressure: 0 bar - 3 bar
Power: 750, 550, 500 W

is an electric pump for diesel transfer. The E120 diesel transfer pump is suitable to answer all those applications requiring long lasting product and a high performance. MADE ...

Flow: 0 l/min - 550 l/min
Pressure: 1.8 bar
Power: 1,500 W

... agriculture, this electric pump with open impeller for diesel transfer is the perfect solution if you are looking for a high-performance product that is reliable over time. HIGH PERFORMANCE the E300 ...

Flow: 0 m³/min - 0.34 m³/min
Head: 0 m - 36 m
Power: 1 kW - 3.7 kW

The MG-series is a submersible grinder pump designed for handling raw sewage and other effluent drainage applications, where the pump or the discharge piping is subject to clogging from oversize material. ...

Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W

The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure ...

Flow: 7 l/min
Pressure: -0.267 bar - 0.45 bar

The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum ...

Flow: 7.5 l/min
Pressure: -0.666, 1.5 bar

The DP 0110PWM is a pump compressor that runs continuously on a 12 V rated voltage for 5.000 h. Weighing in at 0.3 kg, this model is capable of reaching vacuum pressures up to -666 mbar with a 7.5 l/min ...