Transfer pumps

Flow: 110, 100 l/min
Pressure: 0 Pa - 700,000 Pa

Port size 3/4"(20mm) maximum fluid discharge of 110L/min This compact light weight pump has a very competitive fluid transfer rate and is popular in many industries. It has a very competitive ...

Flow: 1,250 m³/h
Pressure: 10 bar
Head: 65 m

Self-Priming Centrifugal Pumps, with semi-open impeller, suitable for dirty or waste water applications. Solid passage size limit to 75mm (3 inches). The internal construction allows air to separate from water to achieve ...

Flow: 0 l/min - 3.4 l/min

Ideal for fluid transfer, dispensing, and metering applications in laboratory, process and wash-down environments Housings are completely sealed—IP66 and NEMA 4X rated Washdown drive is easy-to-clean and resistant to ...

Flow: 43 m³/h
Input diameter: 65 mm
Output diameter: 65 mm

... industrial pump (⌀ 65mm). Made in 316L Stainless Steel and ABS plastic, it is for example perfectly adapted for a use in wineries. Lowmotion 2.5 is washable and it is possible to disinfect it. Light and easy handling With ...

... Sprague hydraulic pumps move relatively large flows of liquids at low to moderate pressures. The pumps deliver liquid with each up and down stroke of the liquid piston rather than, only with a down stroke ...

Flow: 0 m³/h - 500 m³/h
Pressure: 0 bar - 150 bar
Head: 0 m - 120 m

... maintenance for use continuous (abandon of mechanical seal pumps) Design features Pumps of the series CNV MAG-M are vertical single-stage volute casing pumps with closed impeller. Close ...

Flow: 400 us gal/min
Head: 200'00"

... Close-Coupled, Flexible Coupled, Horizontal or Vertical-Mounted Pumps Applications Include: Hot Water Circulating Pumps Cooling Tower Makeup Boiler Feed Service ...

Flow: 0 us gal/min - 1.5 us gal/min
Pressure: 0 bar - 12 bar

The Gearchem pumps are designed for continuous on duty use. They are constructed out of the strongest material available to provide superior chemical resistance and assure long life. Designed to handle a variety of process ...

Flow: 25 l/min - 60 l/min
Pressure: 1 bar - 10 bar
Power: 1.5, 0.75 kW

... BARREL PUMP Mobile Barrel Pump Used for easy transfer of low and high viscosity fluids from barrels, tanks, containers etc. Different pump alternatives are available ...

Flow: 8.4 l/min
Pressure: 21 bar

Air operated 3:1 diaphragm pump The Binks DX200 3:1 pump has been designed to perform in tough spray gun, system or transfer applications. Higher fluid pressure with constant low ...

Flow: 0.6 m³/h - 15 m³/h
Pressure: 70 bar - 120 bar
Power: 15 kW - 75 kW

High Pressure Plunger Pump The RONO high pressure plunger pump is a triplex piston pump and is used to convey various edible fat products through multipurpose process lines. The pump ...

Flow: 1 m³/h - 3 m³/h

Mono Block Rotary Gear Pump Fluid Tech Systems offers “ROTOFLUID” brand gear pump Model “FTMB” (Mono block Gear Pump, Fluid Transfer Gear Pump) which ...

Flow: 0 m³/h - 440 m³/h
Pressure: 0 bar - 24 bar

The Compact C Range progressing cavity pump has been manufactured by Mono to offer you a transfer pump designed to fit into compact spaces, whilst reliably ...

Flow: 0 m³/h - 450 m³/h
Pressure: 16 bar
Head: 0 m - 100 m

... series pumps has designed for pumping not including big particulars high temperature liquids. • TKF-K series pumps are air cooled type pumps. Pump and motor is connecting ...

Flow: 130 m³/h
Pressure: 36 bar

Horizontal direct coupled Cryogenic Pumps CS and CBSD pumps are typically used in intermittent duty for road tanker loading.

Flow: 52 l/min
Pressure: 20 bar
Power: 1.5 kW

70880 Electric gear oil pump suitable for lubricants. it can be used for multiple purposes uses like oil transfer and filling in stationary plants with a flow-rate up to 52 ltr./min. it develops a pressure ...

Flow: 10 m³/h - 400 m³/h
Pressure: 16 bar
Head: 5 m - 110 m

... centrifugal pumps. • Main pump dimensions are compatible with DIN 24256 (ISO 2858). • Single entry, closed type impeller is used. • Radial vanes are used behind the impellers to lower the pressure and ...

Flow: 17 l/min - 1,041 l/min
Pressure: 7 bar

Air diaphragm pump (also called Pneumatic Diaphragm Pump) is a positive displacement pump that uses a combination of the reciprocating action of a diaphragm and suitable valves on either ...

The RDC021 Series Piston Pump/Pneumatic/Low-Pressure, manufactured by RDC Rodicar, is designed as pneumatic pump. It is mainly used for transferring liquid. This pump is built with a ...

... materials from which the pump is made. The open impeller design allows liquids containing relatively high levels of impurities to be pumped without the risk of the impeller clogging. As a result of these characteristics ...

Flow: 0 m³/h - 400 m³/h
Pressure: 0 bar - 48 bar

The hopper pump from Nova Rotors s.r.l. come with a feeding conveyor that is ideal for transferring products that are highly viscous, and are characterized with a high solid percentage that starts at 17%. This device ...

The peristaltic pump is the new soft and delicate system for transferring more or less thick fluids. The pump is suitable for working with fluids (wine, fruit juice, milk, oil), semi-solid products (whole ...

Flow: 0 m³/h - 25 m³/h
Pressure: 2.4 bar
Head: 0 m - 24 m

These centrifugal food grade pumps are highly efficient as they require a lower power consumption than other centrifugal pumps, the impeller used within these pumps is also highly efficient ...

Flow: 10, 30, 5 l/min
Pressure: 1.5 bar - 7 bar
Power: 0.4 kW - 1.5 kW

Double diaphragm paint pumps can be considered the best equipment in paint transfer such as they are widely used in fixed and mobile locations, for manual and automatic spray gun alimentation. The ...

Flow: 0 m³/h - 168 m³/h
Head: 0 m - 80 m
Input diameter: 100 mm

Hygienic centrifugal pump H1CP – single stage, non self-priming Reliable product feed in hygienic processes Easy and fast cleaning High surface quality due to parts made of solid material Robust mechanical ...