Suction pumps

Flow: 1 l/min - 696 l/min
Pressure: 2 bar - 8.3 bar

2'' EXP Non-Metallic Air Operated Diaphragm Pump PD20E-FES-PAA Conductive PVDF ARO® EXP air operated diaphragm pumps with bolted PVDF and conductive PVDF wetted parts offer best in class features ...

Flow: 1 l/min - 200 l/min
Pressure: 2 bar - 8.3 bar

... 1” non-metallic diaphragm pumps are a versatile solution for numerous applications. Our EXP 1” models achieve flow rates of up to 53 GPM (200.6 LPM) and offer a wide array of material and porting configurations. These ...

Flow: 0 l/min - 1,250 l/min
Pressure: 1 bar - 8 bar

3” metallic air operated diaphragm pump The ARO metallic 3” PX30X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...

Flow: 2,275 m³/h
Head: 91 m
Power: 3.7 kW - 660 kW

A "Run Dry" heavy duty submersible designed for abrasive and corrosive slurries. Overview Bottom Suction slurry submersible pump with a twin volute casing construction to balance lateral thrust and ...

Flow: 1,000 m³/h
Pressure: 108 psi
Head: 55 m

The Warman SP SPR series of cantilever sump pumps have semi-open impellers that are capable of double suction. It has a cantilevered shaft design and a recessed impeller option. The housing is either ...

Flow: 7.5 l/h - 75 l/h
Pressure: 2 bar - 25 bar

The delta® pump from ProMinent uses a controllable solenoid drive. It has the ability to adapt and monitor suction and pressure strokes completely for each application. The product offers a wide range ...

Flow: 2 m³/h - 18 m³/h
Pressure: 1 bar - 5 bar

These small pneumatic suction pumps have evolved from the innovative bringing together of smart components: a pressure adjuster, pressure gauge combine, and a vacuum ...

Flow: 2 m³/h - 36 m³/h
Pressure: 6 bar
Head: 0.5 m - 19 m

The MK is a pump that is equipped with a three-channel impeller which is capable of being submerged. This pump is housed by a volute casing that also functions as a suction strainer, ...

Flow: 25 m³/h - 3,405 m³/h
Head: 5 m - 90 m

... is a hard rock pump used in heavy-duty slurry solutions, and mildly corrosive slurries. Equipped with a hydraulic wet end, composed of three components: namely the shell or casing, the impeller and the suction ...

Flow: 30,000 us gal/min
Pressure: 750 psi

... and markets. Available in wet pit or closed suction designs, this vertical submersible pump is also available in a selection of material combinations. The Floway® VSB has a compact connection ...

Flow: 6,000 m³/h
Pressure: 100 bar

... life, Gabbioneta™ DSIL pumps minimize axial and radial load while meeting tough NPSH requirements. Overview Gabbioneta® DSIL process pumps feature heavy duty, vertical in-line overhung pumps ...

Flow: 2.9, 3.6, 4.4, 5.6 l/min
Pressure: 105, 140, 167, 210 bar

The HiP e710 is an electrically driven pump used in supercritical CO2 applications. for more information on these pumps, please contact us! The HiP e710 has a stainless steel pump ...

Flow: 0.01 l/min

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Flow: 0.22 l/min - 0.25 l/min

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar

ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...

Flow: 1 m³/h - 35.2 m³/h
Pressure: 6 bar - 16 bar

... Series Pumps have the ability to deliver an extensive pressure range that reaches up to 16 bars. Through its double stainless steel bellow property, shaft sealing is made possible. A minimal sheer level is incorporated. ...

Flow: 15 m³/h - 110 m³/h
Pressure: 12 bar

... adjustment that helps the performance of the device constant all through time. The pumps can be removed in situ without the need to disconnect the suction and discharge lines. The pump ...

Flow: 280 m³/h
Pressure: 16 bar
Head: 60 m

... motor and pump have different shafts. Standard type motors are used. The good process design helps to remove the complete unit that is inserted without removing the pump casing from the pipe assembly. ...

Flow: 140 m³/h
Pressure: 25 bar
Head: 60 m

Single-stage resp. two-stage pumping units in compact design with nominal performances according to EN 733 / DIN 24255 as well as additional size DN 25, where suction and discharge branch ...

Flow: 200 m³/h
Pressure: 16 bar
Head: 60 m

The compact single-stage series ZTI pump unit is designed to deliver nominal performances in compliance with EN 733. The inline arranged suction and discharge orifices are directly installed ...

The Siphon with stopcock from Burke is equipped with a transparent hose that allows users to monitor the medium within the model. This combination is capable of completely emptying a container with the condition that the liquid is primed ...

... series is a suction pump manufactured by Samoa. It is a double-acting air operated pump for utilization in non-corrosive liquids, waste oil, etc. This is highly suitable if an operator ...

pumpmaster

Flow: 112 m³/h - 10,800 m³/h
Head: 8.5 m - 140 m

Series HFXS pumps are a kind of wear resistance single-stage double-suction centrifugal pumps with horizontal split-case. And it is our new products for delivering the liquid containing ...

Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps ...

Flow: 0 l/min - 2,450 l/min
Head: 0 m - 46 m
Power: 2.2 kW - 21.3 kW

Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip ...

Flow: 0 l/min - 800 l/min
Head: 0 m - 85 m
Power: 2.6 kW - 15 kW

... immersion pumps series SGL equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (grinding oils) as they occur in high-speed grinding. The ...

Flow: 5 l/min

... Series of small capacity air pumps from Hiblow have been designed for control using integrated DC motors (rated voltage of DC12). These pumps are generally utilized in certain applications ...

Flow: 5 l/min

The ML - 6B is a small capacity air pump DC. In its air mats, it can give and have pressurization of air. This product can also extract air for vacuum packaging. It also has an air sampling and a suction ...

Flow: 7 l/min

The MR - 6B is a small capacity air pump powered with DC. Its air mats are capable of providing and handling high air pressure levels. This product can also extract air for vacuum packaging. It also has ...

Flow: 5.3, 15, 9, 5.9 m³/h

... Self-priming pump Flow can be reversed (double sense of rotation) Maximal density acceptable : 1,1 gr/cm3 Ambient temperature between -15°C and 40°C Maximum relative humidity 80% Maximum fluid temperature 90°C Maximum ...

Flow: 29, 19 m³/h

... are electronic pumps for water and seawater. They can work with a speed of 2800 rpm and they can have constant operation with a frequency of 50 Hz. These pumps are equipped with an IP 54 degree of protection. ...

Flow: 1.6, 3.7, 1.4, 4 m³/h

Pompe Japy's DC electric pumps 12 or 24 V - G30C1 - G30C2 - G60C1 - G60C2 comes with different maximum flow rate of 1,4 m3/h, 1,6 m3/h, 3,7 m3/h and 4 m3/h. It is also coupled with power, voltage, current, orifice and ...

Flow: 5 m³/h - 3,500 m³/h
Head: 4 m - 105 m

Description : • Single-stage, end-suction centrifugal volute pumps. • Main dimensions, compatible with EN 733 (DIN 24255) norm. A total of 45 designed pumps avaible in the series. • ...

Flow: 30 m³/h - 4,000 m³/h
Pressure: 16 bar - 20 bar
Head: 10 m - 160 m

... it in such a way that it is easily assembled. • Double suction pumps have the advantage of low NPSH (net positive suction head) features. • The pump has two different ...

Flow: 20 m³/h - 105 m³/h
Pressure: 16 bar
Head: 35 m - 105 m

DESIGN These are single stage, end suction centrifugal pumps. • The main pump dimensions are compatible with DiN 24256 (ISO 2858). • Performances are compatible with NFPA standards. • ...

Flow: 0 us gal/min - 35 us gal/min
Head: 0 m - 70 m

... Stationary cutter ring is reversible for extended service. Impeller: Silicon bronze, semi-open, non-overloading two-vane design with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Casing: ...

Pressure: 0 bar - 500 bar

... reciprocating pumps of the MRP series feature pressures up to 420 bar, high vacuum volume, a large suction chamber volume, a direct degassing at the highest point of cold end (enhanced ...

... level control and a bottom suction plate to drain down to a few millimeters, the PS pumps can be employed for a broad range of tasks. PS (3~) - Powerful three-phase pumps for tough ...

Pressure: 400 bar

Character features of One-hand Pump ABNOX WANNER®: Suitable for lubricants(Grease) Pump head made of high quality drop forging aluminium High precision fit of piston to pump head ensures ...

Flow: 0 us gal/min - 42 us gal/min
Pressure: 8.6 bar
Head: 0 m - 88 m

... Flap Valve Pumps are recommended for abrasive slurries, suspended and non-suspended solids and line-size solids. All SANDPIPER® Heavy Duty Flap Pumps are configured with bottom discharge porting to prevent ...

Flow: 0 us gal/min - 260 us gal/min
Pressure: 8.6 bar
Head: 86 m

HDF Pumps are recommended for abrasive slurries, suspended and non-suspended solids and line-size solids. All SANDPIPER® Heavy Duty Flap Pumps are configured with bottom discharge porting to prevent ...

Flow: 0 us gal/min - 303 us gal/min
Pressure: 8.6 bar
Head: 88 m

HDF Pumps are recommended for abrasive slurries, suspended and non-suspended solids and line-size solids. All SANDPIPER® Heavy Duty Flap Pumps are configured with bottom discharge porting to prevent ...

Flow: 20 m³/h
Head: 12.3 m
Power: 0.6 kW - 1.1 kW

SUBMERSIBLE PUMPS FOR CLEAR AND DRAINAGE WATER - H16 Wear resistant submersible pumps APPLICATION HOMA H 16 is wear resistant submersible drainage pumps. With their 10 mm spherical ...

Flow: 0 m³/h - 10,000 m³/h
Head: 0 m - 450 m
Power: 0 kW - 15,000 kW

... viscosities and API gravities. The DVS design is horizontal, single stage, double suction, double volute, and horizontally split between bearings. Key features include suction and volute channels that ...