- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Impeller pump HiPeri serieswaterelectricself-priming
Add to favorites
Compare this product
Characteristics
- Technology
- impeller
- Fluid
- water
- Operation
- electric
- Priming
- self-priming
- Mobility
- stationary
- Domain
- industrial
- Applications
- suction, handling, distribution
- Material
- cast iron, brass
- Voltage
- 380 V
- Other characteristics
- mechanical, for fluids, with electronic control, seal
- Flow
Min.: 5 m³/h
(176.57333 ft³/h)Max.: 40 m³/h
(1,412.58667 ft³/h)- Pressure
6.5 bar, 7 bar
(94.275 psi, 101.526 psi)- Head
Min.: 0 m
(0'00" )Max.: 50 m
(164'00" )- Power
0.37 kW, 0.55 kW
(0.5 hp, 0.75 hp)- Fluid temperature
Min.: 5 °C
(41 °F)Max.: 60 °C
(140 °F)- Length
207 mm, 232 mm
(8 in, 9 in)- Width
118 mm
(4.65 in)- Height
145 mm, 152 mm
(5.71 in, 5.98 in)- Weight
5 kg, 6.4 kg
(11.02 lb, 14.11 lb)
Description
Short description
Design
Non-self-priming peripheral pump
Application
Type key
Example - HiPeri 1-4
HiPeri - peripheral pump
1 - Entry range
4 - Max. delivery head (40m)
Technical data
Materials
Scope of delivery
Accessories
Caractéristiques / spécifications techniques
- Easy handling due to its light weight, perfect for continuous operation
- Brass impeller for fluids up to 60 °C and ambient temperatures up to 40 °C
- Efficient thanks to low power consumption with high maximum delivery head and high maximum volume flow
- Up to 7 m negative suction head
- Expandable with electronic control of pumps Wilo-HiControl 1
Design
Non-self-priming peripheral pump
Application
- Water distribution/boosting
- Raw water intake
- Sprinkling and spraying
- Rainwater utilisation
Type key
Example - HiPeri 1-4
HiPeri - peripheral pump
1 - Entry range
4 - Max. delivery head (40m)
Technical data
- Max. fluid temperature: 60 °C
- Ambient temperature: 40 °C
- Max. operating pressure: 6.5 bar
- Permanent or intermittent operation
- Max. connections per hour: 20
- Suction head: up to 8m
- Insulation class: 155 (F)
- IP rating: IPX4
- Sound-pressure level: LpA < 70 dBA
Materials
- Pump housing made of grey cast iron EN-GJL 200
- Lantern/motor bearing aluminium with brass inserts
- Impeller brass CW617N
- Shaft 1.4305 stainless steel
- O-rings nitrile (NBR)
- Mechanical seal made of carbon/ceramic/NBR
Scope of delivery
- Pump
- Installation and operating instructions
Accessories
- Wilo-Fluidcontrol FC
- Wilo-Fluidcontrol EK (with power cable for the mains connection and connection cable between pump control and pump)
Caractéristiques / spécifications techniques
- Max. fluid temperature: 60 °C
- Ambient temperature: 40 °C
- Max. operating pressure: 6.5 bar
- Suction head: up to 8m
- Insulation class: 155 (F)
- IP rating: IPX4
- Sound-pressure level: LpA < 70 dBA
- Impulse/operation: permanent or intermittent
- Max. connections per hour: 20
- Primary materials: pump housing EN-GJL 200, impeller CW617N brass, shaft 1.4305 stainless steel, mechanical seal carbon/ceramic/NBR
Catalogs
Wilo-HiPeri 1-4/5
36 Pages
Exhibitions
Meet this supplier at the following exhibition(s):
Other Wilo products
Building Services Residential
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.