Impeller pumps

Flow: 750 l/min
Power: 0.37 kW - 5.5 kW

... equal to the pump shaft Smooth running of the pump due to robust support tube solidly connected to the mounting flange Very long service life, even in case of continuous use, suitable for dry running A ...

Flow: 750 l/min
Power: 0.37 kW - 5.5 kW

... service life, even in case of continuous use, suitable for dry running Smooth running of the pump in the robust bearing support A range of carefully chosen impeller diameters Available in four sizes: ...

Flow: 5,000 m³/h
Pressure: 300 psi
Head: 73 m

... current AH® pumps. Key features/benefits • Increased wear life – the WRT® impeller and throatbush combination is designed to increase wear life between 30% and 50%* • Power savings – lower pump ...

Flow: 360 m³/h
Pressure: 108 bar
Head: 55 m

The Warman GPS vertical slurry pumps features a double impeller entry that prevents air locking of impeller. The product presents a cantilevered shaft design with firm motor mountings ...

Flow: 0.71 m³/h - 0.74 m³/h

... size68 Rotor surfacePainted black Terminal box materialGlass-fiber reinforced plastic Pump impeller materialGlass-fiber reinforced plastic Agitator materialPE Pump housing materialGlass-fiber ...

Flow: 0.6 m³/h - 10,080 m³/h
Pressure: 12 bar
Head: 1 m - 120 m

The Amarex KRT G Series is a single-stage motor pump that is equipped with different impeller types. Designed with a close-coupled structure, this vertical sumbersible motor is compatible with wet or ...

Flow: 4 m³/h - 180 m³/h
Pressure: 10 bar
Head: 5 m - 105 m

Design Horizontal, long-coupled, self-priming volute casing pump in back pull-out design, single-stage, with open multi-vane impeller. Design to ATEX. Applications Handling of pure, contaminated ...

Flow: 4 m³/h - 15,000 m³/h
Pressure: 10 bar
Head: 1 m - 140 m

Design Horizontal, radially split volute casing pump in back pull-out-design, single-stage, single-entry, available with various impeller types: non-clogging impeller, open multi-vane ...

Flow: 0 m³/h - 6 m³/h
Head: 0 m - 180 m
Power: 22 kW - 110 kW

... corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 stainless steel, enables it to withstand demanding conditions found in construction, aggregate and ...

Flow: 0 m³/h - 1 m³/h
Head: 30 m - 110 m
Power: 11, 22 kW

The LH-W-14-series is a submersible stainless steel casting high head corrosion-resistant pump having dual impellers designed for handling aggressive and corrosive liquids. The all wetted parts are made ...

Flow: 5 m³/min - 350 m³/min
Head: 1 m - 5 m
Power: 3.7 kW - 250 kW

The SSP-GS-series is a submersible axial-flow pump designed to be installed in a discharge column. The pump offers an efficient and a high volume pumping at a low head application. It features, easy to ...

Flow: 1.5 m³/h - 5 m³/h
Head: 4 m - 7 m
Power: 0.18 kW

... alignment of the impeller, the unique hydraulic part (closed impeller + innovative diffusor) has been enhanced through numerical simulations to improve hydraulic performances in comparison to existing ...

Flow: 2.9 m³/h - 4.4 m³/h
Head: 4, 5.2 m
Power: 0.12 kW - 0.25 kW

... ensures a great alignment of the impeller, the unique hydraulic part (closed impeller + innovative diffusor) has been enhanced through numerical simulations to improve hydraulic performances in comparison ...

Flow: 7 m³/h - 20 m³/h
Head: 10.8 m - 17 m
Power: 0.75 kW - 1.5 kW

... assembly Impeller driven by a cantilever shaft with back impeller ST22 to T262 versions No mechanical seal, dry run without a problem Injected polypropylene or PVDF : great resistance to acids ...

Flow: 0 l/min - 34 l/min

... damage. The Amalfi DC electric pump is equipped with self-priming pump with flexible impeller; it is characterized by a body made entirely of polypropylene and a chamber coated in ...

Flow: 0 l/min - 550 l/min

... electric pump with open impeller for diesel transfer is the perfect solution if you are looking for a high-performance product that is reliable over time. HIGH PERFORMANCE With a flow rate of ...

Flow: 75 m³/h
Head: 47 m
Power: 24 kW

Hydraulic pumps for dredging Submersible hydraulic pumps with agitator. Variable speed. Particularly suitable for dredging heavy or abrasive mixtures. These are the main features of our dredging pumps: - ...

Flow: 0 m³/h - 100 m³/h
Power: max 60.0 kW

... Clog - Capacity 100 m3/h - Power 44-60kW No Clog Pump EL60 RI. The first of the upcoming series of Recessed Impeller Pumps. Characteristics: Ensure the passage of solids, up to 100 ...

Flow: 280 l/min
Head: 23 m
Power: 0.18 kW - 2.2 kW

In the TE Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings ...

... seal maintenance, poor alignment and adverse operating conditions. 316L stainless steel volute, backplate, impeller and shaft Five-bladed impeller with deeper eye for improved inlet characteristics Modular ...

Flow: 0 m³/h - 68 m³/h
Pressure: 0 psi - 1,250 psi

These pumps produce a smooth, constant flow rate that reduces reverse osmosis membrane fouling. They include many of the features of the 200 Series pumps, including strong investment cast impellers, ...

Flow: 810 l/min
Head: 300 m

The borehole pump is the essence of simplicity in design. The simple positive displacement, the specially designed rotor and stator are immersed below draw-down level in the bore or well. It is capable of handling flows ...

Flow: 110 l/min
Power: 0.3 kW - 1.8 kW

... are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller and feed screw in nylon, pump body in aluminium allow them to be used with water, emulsions ...

Flow: 38 l/min - 213 l/min
Head: 14 m
Power: 0.53 kW - 4 kW

... are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller in brass, feed screw and pump body in aluminium allow them to be used with water, emulsions ...

Flow: 40 l/min - 390 l/min
Head: 20 m
Power: 1.15 kW - 5.8 kW

... are suitable for transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller in brass, feed screw and pump body in aluminium allow them to be used with water, emulsions ...

... permanent magnetic rotor with one-off injection incorporated impeller in smooth balance 4.Heavy duty work, can sustain continuous 24 hours work 5.Special designed high efficiency closed-type impeller 6.Sustain ...

Flow: 2,916 m³/h
Pressure: 3.75 bar
Head: 37.5 m

Flow: 1,500 m³/h
Pressure: 2 bar - 10 bar
Head: 50 m

... direction of pump can be oriented in any direction of 360 degree. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion resistance. Sunbo ...

Flow: 1,548 m³/h
Pressure: 4 bar
Head: 40 m

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies ...

Flow: 0.5 l/s - 12.55 l/s
Pressure: 0 bar
Head: 1.06 m - 18 m

Electromechanical assembly in GJL-250 cast iron, for submerged operation. Seal set comprising 1 (one) silicon carbide mechanical seal and 1 (one) lip seal. Ecological dry motor.

Flow: 0.5 l/s - 13 l/s
Pressure: 0 bar
Head: 0.9 m - 18.4 m

Electromechanical assembly in GJL-250 cast iron, for submerged operation. Seal set comprising 1 (one) silicon carbide mechanical seal and 1 (one) graphite alumina mechanical seal, installed opposing with oil lubrication. Oil bath motor.

Flow: 1 l/s - 7.6 l/s
Pressure: 0 bar
Head: 1.78 m - 22.6 m

Electromechanical assembly in GJL-250 cast iron, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals assembled opposing in inspectable oil sump. Ecological dry motor. Series with explosion-proof ATEX certification.

Flow: 250 m³/h - 3,000 m³/h
Pressure: 2 bar
Head: 2 m - 20 m

Made to pump activated sludge or rain, raw and mixed water that has an upstream screen, this centrifugal pump from Ruhrpumpen comes with the effective three-channel impeller. With this ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

... and Technology, and us. Impeller profile adopts the international advanced solid-liquid two-phase flow velocity ratio theory to get good wear resistance, and high efficiency. High chromium alloy is applied to the pump ...

Zuwa UNISTAR 2000 impeller pump with drive is suitable for water, including slightly soiled and sea water, diesel, biodiesel, detergents, antifreeze, draining waterbeds and draining and cleaning tanks. ...

... structure which can either be through a drill bracket or through an adapter. The drill offers an ease way of connecting the pump shaft to the chuck. A depth stop is provided to grant an easy fixation process. The ...

Flow: 30 l/min
Pressure: 4 bar

... an extremely light and versatile impeller pump designed with a built-in motor of 1.7-kilogram weight. It is specifically ideal for repair shops and filling stations that require a compressed air supply. ...

These portable drum-transfer immersion pumps are designed to pump corrosive liquids. Their special shape ensures that any spillages are collected in the drum.

These portable drum-transfer immersion pumps are designed to pump corrosive liquids. Their special shape ensures that any spillages are collected in the drum.

These portable drum-transfer immersion pumps are designed to pump corrosive liquids. Their special shape ensures that any spillages are collected in the drum.

Flow: 450 m³/h
Head: 114 m
Power: 138 kW

The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated ...

Flow: 750 m³/h
Head: 158 m
Power: 330 kW

The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated ...

Flow: 225 m³/h
Head: 79 m
Power: 87 kW

The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated ...

Flow: 0 us gal/min - 210 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 125'00"

... is not recommended.They operate with HT6 and HT7 power units or different source that can deliver flows to 5 GPM. The pumps are small in size, and can be bolted directly into a pipeline.

Flow: 0 us gal/min - 800 us gal/min
Pressure: 0 psi - 2,800 psi
Head: 0'00" ft - 85'00"

Open Channel Impeller Pumps combined with Close Internal Clearances to Allow for High Efficiency Clean Water Pumping with some Solids Handling capability.

Flow: 0 us gal/min - 135 us gal/min
Pressure: 0 psi - 2,000 psi
Head: 0'00" ft - 125'00"

Discharge Size: 1 1/2″ : 38 MM Max Diameter: 5 5/16″ : 148.2 MM Max Flow: 135 GPM : 511 LPM Max Head: 125 Feet : 38.1 M HYD Input: 7 GPM Max : 26 LPM HYD Pressure: 2000 PSI Max : 136 BAR Weight: 17 LBS : 8 KG

Flow: 4.8, 2.1 m³/h

This utility pumps comprise of impellers which help in recharging of softeners, transfer, filling, addition of water, draining of evacuations, evacuation of condensing, plumbing, agriculture, food-processing ...

Flow: 30 m³/h - 835 m³/h
Pressure: 3 bar

The flexible impeller pump is self priming, reversible, compact and efficient also at low rpm. With its simple operation has an easy installation� and maintenance, is suitable for a variety ...

Flow: 162 m³/h - 360 m³/h
Head: 12 m - 56 m
Power: 0 kW - 120 kW

... The features of this kind of slurry pump in which the frame plates have removable wear-resistant metal liners. The impellers are built of wear-resistant metal. The frame plate liner and impeller ...

Flow: 16.2 m³/h - 34.2 m³/h
Head: 25 m - 94 m
Power: 0 kW - 30 kW

EGM Slurry Pump1. Superb performance in high head application； 2. Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner and can be removed completely; 3. ...

Flow: 21.6 m³/h - 136.8 m³/h
Head: 7 m - 46.4 m
Power: 0 kW - 30 kW

1.Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and Throatbush and can be removed completely; 2.Interchangeable anti-abrasive wet parts made of high-chrome alloys; 3.The discharge ...

Flow: 20 m³/h - 500 m³/h
Pressure: 10 bar
Head: 10 m - 30 m

... Thanks to a special impeller designs (X Type Free-Vortex Impeller, S Type Single Vane Impeller and D Type Double Vane Impeller) this series is used different fields ...

Flow: 0 m³/h - 110 m³/h
Pressure: 30 bar
Head: 20 m - 300 m

Vertical Stainless Steel Pumps Description : DSV series consist of vertical, stagged pumps. All parts which come into contact with water are made of stainless steel. Suction and discharge flanges are ...

Flow: 5 m³/h - 25 m³/h
Pressure: 2.5 bar
Head: 4 m - 19 m

Wastewater Sump Pumps Description : PS/PSH series pumps are vertical shaft pumps that operate by means of a special bearing system. The suction flange and the impeller ...