Impeller pumps

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS OF USE - ...

Flow: 0 m³/h - 1,000 m³/h
Pressure: 10 bar
Power: 0.12 kW - 90 kW

... parts without the need to disconnect the pump body from the suction and discharge piping. Pumps with two stages can operate both in parallel (to increase the flow) or leaving one in reserve. Applications Pumps ...

Flow: 4, 8, 16 m³/h
Pressure: 16, 21, 23 bar
Power: 0.37 kW - 18.5 kW

... series pumps are efficient operation, low noise, compact structure, light weight, easy to service, good seal performance etc. Its high head low-capacity performance range makes it especially suitable for use as a pressure ...

Flow: 0.9 m³/h - 420 m³/h
Head: 0 m - 642 m

... incorporation of the pump unit is simplifi ed by the linear position of stub pipes in the hermetic jacket space requirement is minimized due to compact design standardized design of the connections and couplings of ...

Flow: 1,100 m³/h
Pressure: 10, 16 bar
Head: 150 m

... Optional: with heavy duty bearing for PN16. Materials : Cast Iron, Ductile Iron, Bronze, Cast Steel, SS304, SS316, Duplex SS Flange : PN10/ PN 16 Applications : HVAC and Cooling Tower Fire Protection and Fire Fighting Marine – Ballasting ...

Flow: 43 m³/h
Input diameter: 65 mm
Output diameter: 65 mm

... industrial pump (⌀ 65mm). Made in 316L Stainless Steel and ABS plastic, it is for example perfectly adapted for a use in wineries. Lowmotion 2.5 is washable and it is possible to disinfect it. Light and easy handling With only 90kg, ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 200,000,000 µm

... External, single, or double flushing ​ FRP accessories to empower or adapt the pump to any plant Flanges reinforced in Kevlar (more resistant) On request: chance to choose pump colour Applications Aquarium, zoos, ...

Flow: 0 m³/h - 550 m³/h
Pressure: 10 bar - 16 bar
Head: 0 m - 105 m

... • TKF-M series pumps has designed for pumping non-abrasive and small particulars liquids. • Pump diamensions are acceptable TS EN 733 standard. • Suction and discharge flanges are suitable standard ...

Flow: 20 m³/h - 500 m³/h
Pressure: 10 bar
Head: 10 m - 30 m

... Thanks to a special impeller designs (X Type Free-Vortex Impeller, S Type Single Vane Impeller and D Type Double Vane Impeller) this series is used different fields and different kinds of ...

Flow: 0 us gal/min - 120 us gal/min
Head: 70'00"
Power: 0.75, 0.4, 0.5 kW

... 304 SS Stator Casing Cast Iron Diffuser Shaft: Heat Treated 410 Stainless Steel Hardware: 304 Stainless Steel Impeller: Cast Iron pH Range 5 – 8 ...

... this is a mechanical coolant pump with external bearings that has recently gone into production. Despite its more compact design, the reliability has been improved even more. Mechanical coolant pumps ...

Flow: 5 l/min - 900 l/min
Power: 120 W

... flexible piping Flanged Operating Principle The magnetic pumps are characterized by the absence connection between the motor and the pump unit. The rotation of the impeller and obtained ...

Flow: 325 l/h - 1,930 l/h
Head: 6 m - 28 m
Power: 0.37 kW

... These pumps can withstand wide voltage fluctuations from 180-240 volts. The motor body is of aluminium extruded. The impeller is of forged brass and delivery casing is made of cast iron. These pumps are ...

Flow: 299 l/min
Head: 12.2 m
Power: 0.75 kW

... This lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size - 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller with ...

... Stand-mounted motor pump with by-pass, pump body and stand made entirely of AlSI 304 stainless steel. The pump features rubber impeller designed for use in the food industry and is complete ...

Flow: 0 l/min - 230 l/min
Pressure: 6.8, 6, 5 bar
Power: 8 kW

... Floating Fire Pump Product overview The portable high pressure floating fire pump is a new generation of high-head ultralight pump which developed by our company. The pump unit adopts ...

Flow: 0 m³/h - 12 m³/h
Head: 90 m
Power: 1, 3 ch

... Our single pump booster sets increase and supply constant pressure for cold water installations where pressure provided by the mains supply or feed tank is insufficient. Example installations include; domestic properties, commercial buildings, ...

Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m

... Single-stage radial impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump is balanced by ...

Flow: 54 m³/h - 324 m³/h
Head: 16 m - 35 m
Power: 2.2 kW - 22 kW

... Submersible electric pumps suitable for the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids. Owing to their maneuverability they can be easily moved. ...

Flow: 130, 210, 250 m³/h
Head: 29, 27, 23 m
Power: 30 kW

... series self-priming sewage pump is a new production which is developed according to the latest technology home and broad. Pump has single stage,single suction,horizontal,gas-liquid mixed type.ASP2010 series self-priming ...

Flow: 0 l/min - 100 l/min
Head: 6 m
Power: 150, 300 W

... Dewatering Pumps PXJ-150 ●For residual water up to 3mm water level ●Easy to place in narrow space such as sumps or wells with slim body ●Three kinds of connection dia, 1″, 3/4″ and 1/2″, are available with one delivery flange ...

Flow: 17 m³/h
Head: 22 m
Power: 1,600, 2,200 W

... explosion-proof sewage pump made of cast iron for portable and stationary (coupling system) purposes robust, adjustable cutting system made of corrosion-resistant special alloy motor housing, pump housing, seal ...

... 4x3x13 model, SM series, Oilfield Drilling Fluid/Mud Centrifugal Pumps SM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling ...

Flow: 225 m³/h
Head: 79 m
Power: 60 kW

... The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated with other priming ...

Flow: 800 m³/h
Head: 22 m
Output diameter: 300 mm

... bottom of the pump with stirring impeller, and can be equipped with both sides of the reamer or cage, loosening the stiff sediment, improve the extraction concentration, automatic hinging, but also to prevent large solid ...