Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/ impeller/shaft are stainless steel ...
Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m
... Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 material. It is anti-corrosive, anti-oxide, anti-acid and anti-alkali liquids. It keeps water usage safe and clean. The screws ...
Flow: 0 l/min - 60 l/min
Head: 0 m - 53 m
Power: 0.75 kW - 2.2 kW
... Single impeller (JAP 80-100 M-T) or double impeller (JAP 150-200-300 M-T) electric pumps with axial intake and upward-facing radial delivery. The main feature of this model is the very high suction capacity ...
STAC S.r.l.
Flow: 0 l/min - 300 l/min
Head: 1.2 m - 19 m
Power: 0.37 kW - 1.1 kW
... Immersed spindle pumps of the ZC series are electric pumps designed for the circulation of coolants and lubricating mixtures in machine tools, glass and plastic processing machines. They are suitable where relatively ...
STAC S.r.l.
Flow: 0 l/min - 500 l/min
Head: 5 m - 31 m
Power: 0.38 kW - 2.2 kW
... Overview
Immersed spindle
pumps of the ZS series are electrically driven units designed for circulation of coolants and lubricating emulsions in machine tools and for transferring
small volumes from collection ...
STAC S.r.l.
Fluid temperature: 90 °C
Input diameter: 1 in
... PUMP TUBES MADE OF ALUMINIUM Drive shaft made of stainless steel AISI 316. Hose connection 1” included. ...
FLUIMAC
Fluid temperature: 50 °C
Input diameter: 1 in
... PUMP TUBES MADE OF POLYPROPYLENE Drive shaft made of stainless steel AISI 316 or hastelloy 2,4610. Hose connection 1” included. ...
FLUIMAC
Fluid temperature: 90 °C
Input diameter: 1 in
... PUMP TUBES MADE OF PVDF Drive shaft made of hastelloy 2,4610. Hose connection 1” included. ...
FLUIMAC
Flow: max 125.0 m³/h
Pressure: 32, 100 bar
Head: max 88.0 m
... Inverter allows full control over the operation of the pump by influencing motor speed. Changing motor speed affects the pumping parameters. Industrial flanged connections The industrial CTX I pumps are equipped ...
Tapflo
Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW
... has a smart design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge hose when the pump ...
Tapflo
Flow: 30, 12, 19.5 m³/h
Head: 7 m - 21 m
Power: 0.25, 1.5, 0.75 kW
... Pump body is made of rigid stainless steel, that makes it light and portable, and cast iron, for long lasting durability. A semi-open impeller made of high chrome alloy match with wearable plate (ductile iron) achieves ...
Tapflo
Flow: 1 m³/h - 130 m³/h
Pressure: 2, 13 bar
Head: 24 m - 80 m
... internal magnet connected to the impeller, which rotates and moves the fluid through the pump, thus the transfer process is achieved. Magnetic Coupling Pump Advantages Special hermetic design of ...
Flow: 145 l/min
Pressure: 6, 3 bar
Head: 6, 12 m
... Using a drum pump in such transfers eliminates all these negativities. Accordingly, drum pumps fall into two different cataegoris; as electric & air powered. At the same time, upon the transferring chemical properties, ...
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... and Technology, and us. Impeller profile adopts the international advanced solid-liquid two-phase flow velocity ratio theory to get good wear resistance, and high efficiency. High chromium alloy is applied to the pump ...
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. There are also various impeller styles like closed impeller, ...
Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m
... applied to Pump head, casing, impeller and cover, the impeller adopts the semi-open type, which has of wear resistance and corrosion resistance and better grain through ability. The stirring device is ...
Flow: 0.27 m³/h - 1.6 m³/h
Head: 12 m - 24 m
Power: 0.56 kW
... Pump with built-in frequency variator Characteristics More Information Fluid - Diesel, Oil, Food liquids, Chemical liquids, Cosmetic liquids, Pharmaceutical liquids, Wine Technology - Flexible impeller ATEX ...
Pompes Japy
Flow: 5.76, 3.84 m³/h
Power: 0.75, 0.56 kW
... Reversible 2-way service pumps Descriptive Technical data: Reversible pump (2-way) Orifices: 1’’1/4 M Particle size: 5 millimetres Maximum suction lift: 6 metres Type of impeller: ...
Pompes Japy
Flow: 6.9, 10 m³/h
Head: 0 m - 30 m
Power: 1.5 kW
... Reversible 2-way service pumps Descriptive Technical data: Reversible pump (2-way) Orifices: 1’’1/2 M Particle size: 10 millimetres Maximum suction lift: 6 metres Type of impeller: ...
Pompes Japy
Flow: 15 l/min - 800 l/min
Pressure: 100 bar - 210 bar
Head: 10 m
... cinrconference of only 22 cm allows easy insertion even in narrow manholes and very small excavation sites • It can be operated by small power packs or by the hydraulic circuit of mini excavators, tractors, ...
DOA Hydraulic Tools Srl
Flow: 15 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 45 m
... run dry without damaging it •The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber •Can be operated by small power packs or by the hydraulic ...
DOA Hydraulic Tools Srl
Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m
... The pump housing can be open in few minutes without tools, for inspection of the impeller and the pumping chamber 38 L/min @ 140 Bar 30 L/min @ 140 Bar 20 L/min @ 140 Bar • Can be operated by small ...
DOA Hydraulic Tools Srl
... Sample Pro Low Flow Pneumatic Groundwater Sampling Pump The Sample Pro portable pump combines the unparalleled sample accuracy and high reliability of a bladder pump in an easy-to-use design. It runs ...
QED Environmental
Flow: 3, 3.6 l/min
Pressure: 71, 102 mbar
Fluid temperature: 0 °C - 95 °C
... This pump is designed for dispense. The use of the pump allows for flexible siting of dispense valves inside the machine, including up to approx. 0,4 metre (15,7 inch) above the water level in the boiler. Varying the ...
Flow: 0.2 us gal/min - 0.8 us gal/min
Head: 8'03"
Fluid temperature: 40 °C
... per second. Each pulse draws the armature and impeller forward against the spring, causing the impeller to pump a volume of liquid out through the outlet port. The spring then returns the armature and ...
Gorman-Rupp Industries
Flow: 1,500 m³/h
Pressure: 16, 35 bar
Head: 160 m
... High efficiency impeller Closed impeller with back vanes providing axial balancing of impeller loads Half open impeller with wear plate and external adjustment Oil seal ...
Johnson Pump
Flow: 1.5 m³/h - 6.5 m³/h
Power: 250 W
Fluid temperature: 110 °C
... extremely strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, thus extending ...
Siebec
Flow: 200 m³/h - 5,500 m³/h
Head: 5 m - 70 m
... solids handling pumps have an international reputation for their solid handling capacity combined with high efficiencies. These pumps are available with a single channel impeller as well as a double channel ...
Fairbanks Nijhuis
Flow: 110 l/min - 510 l/min
Head: 8 m - 37 m
Power: 0.26 kW - 2.2 kW
... and the mechanical strength of the pump. The bearing is not only fixed by conventional press fit but is also sandwiched between the abutting portion in the depth of the magnet capsule and the rear end of the impeller ...
IWAKI
Flow: 8.4 m³/h
Head: 90 m
Power: 1.5 kW
... The new 5” monobloc borehole pumps from the EASYWELL family. Its stainless steel structure gives the E5MX resistant to corrosion. Technopolymer impellers and diffusers ensure high resistance to sand. The electric motor ...
Caprari
Flow: 12.5 m³/h - 900 m³/h
Head: 16 m - 60 m
Power: 1.1 kW - 200 kW
... Type Detachable Pipeline Pump TB Model:TB The following is about Type Detachable Pipeline Pump TB ， I hope to help you better understand Type Detachable Pipeline Pump TB . ...
Shimge Pump Industry (Zhejiang) Co.,Ltd
Flow: 8,000 l/h - 22,500 l/h
Power: 8 W - 80 W
Length: 378, 255, 300 mm
... movement modes,4 ways to link up the pumps,2 preset cycles and a programmable 24 hours cycle - there is no more limitation on how you can set up the water circulation in your tank! The all new "1-Controller-2- Pumps ...
Maxspect (Hong Kong) Limited
Flow: 0 m³/h - 800 m³/h
Head: 0 m - 90 m
Fluid temperature: 140 °C
... Horizontal non-clog pumps having single stage, single suction with back pull out type design DISCHARGE & PERFORMANCE • Delivery up to 200 mm FEATURES • Back pull-out design • Solids handling up to 105 mm • Impeller ...
SPP Pumps
Flow: 0 l/s - 1,100 l/s
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m
... EOA series impeller allows it to resist imbalances caused by fibrous materials and thus guarantees a long service life of the bearings and sealing system. High suction capability The Wastewater Pump series features, ...
... The axial flow pump is mainly composed of front and back shell, main body, impeller, guide vane, bearings and motor. The impeller, is installed at the end of the shaft directly, rotates to create pressure. ...
ERG Technology
Flow: 8 m³/h - 24 m³/h
Pressure: 1 MPa
Head: 6 m - 51 m
... Thermal protector：single phase Insulation：F Protection：IP55 ...
Guangdong LingXiao Pump Industry Co., Ltd.
Flow: 30 m³/h - 5,000 m³/h
Head: 10 m - 400 m
Power: 4 kW - 710 kW
... efficiency, energy saving, reliable and good suction performance. Guide vane type pump body, compared with pump casing type pump body, the radial force is eliminated to ensure that pump ...
Shanghai Apollo Machinery Co., Ltd
Flow: 1.2 m³/h - 10.2 m³/h
Head: 1.5 m - 6 m
Fluid temperature: 0 °C - 50 °C
... stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability. BEST ONE has a semi-open impeller, while BEST ONE VOX is equipped with vortex ...
EBARA PUMPS EUROPE
Flow: 140 us gal/min
Head: 16.8 m
... Vane and Low Noise Motor. Hydrostatic Tested Pump Casing to 1.5 Times the Maximum Operating Pressure. Pump Supported by the In-Line Piping Allowing Quick Installation. Vacuum Case Bronze Impeller ...
SHURflo
the best suppliers