Cast iron pumps

Flow: 70,000 m³/h
Pressure: 145 psi

... Warman® Q-Series Axial Flow Pumps model QCL model is a horizontal elbow design in fabricated construction with separate pump casing. The pump is designed for continous circulation of ...

Flow: 70,000 m³/h
Pressure: 145 psi

... Warman® Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel. Overview The Warman® Q-Series Axial ...

Flow: 2,000 m³/h
Pressure: 130 psi
Head: 55 m

This unit is a pump that is equipped with a one piece volute liner and has no radial split at the cutwater. The unit permits adjustment of front and rear liners during operation to maintain production and reduce wear. ...

Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar

The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, ...

Flow: 0 l/min - 197 l/min
Pressure: 1 bar - 8 bar

1” metallic air operated diaphragm pump The ARO metallic 1” PX10X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...

Flow: 0 l/min - 265 l/min
Pressure: 1 bar - 8 bar

2” metallic air operated diaphragm pump The ARO metallic 2” PX20X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...

Flow: 57 l/min

... durable, cast-iron housing, low-friction vanes and UL-listed motor for reliability, while its special seal design and stainless steel outlet protect the pump in harsh weather environments. ...

Flow: 40 m³/h
Head: 1.3 m - 16 m
Power: 1.5 kW

Design Vertical, single-stage, fully floodable submersible waste water pump in close-coupled design, made of grey cast iron, non-explosionproof. Applications Handling of all types ...

Flow: 1.5 m³/h - 716 m³/h
Pressure: 0 bar - 16 bar
Head: 2 m - 144 m

The Etabloc Series, engineered by KSB, is composed of centrifugal transfer pumps. They are characterized by their closed-coupled, single-stage cylindrical housing pump with ratings and main dimensions ...

Flow: 50 m³/h - 2,280 m³/h
Pressure: 16 bar
Head: 2.5 m - 90 m

... automation equipment for integration but also the software required for pump commissioning. Designed to ATEX, these horizontal, long-coupled, single-stage volute casing pump (pump size ...

Flow: 19 l/min - 1,200 l/min
Pressure: 7, 8.4, 8.6 bar
Head: 2.4, 2.5, 3.7, 4.5, 4.9 m

The VA industrial range really does set the benchmark for air diaphragm pumps. The range features fast-acting air valve technology – eliminating wasted air and using all of the air for moving the fluid. The efficient ...

Flow: 140 l/min

... dispensers and fixed fuel transfer systems, as well as other industrial applications. The compact cast iron structure makes the E140 electric pump the perfect system ...

Flow: 0 l/min - 50 l/min

... earth-handling machinery and mobile fuel ensemble in vehicles and construction equipment. Its architecture comprises a cast-iron base, finished with an upgraded paint solution, with resistance from rusting.

Flow: 0 l/min - 550 l/min

... rotary pump is ideal for topping up and transferring diesel from drums. The max. working pressure is 1.8 bar and guarantees a high flow rate performance of the transferred diesel. The cast iron ...

Flow: 0 m³/h - 250 m³/h

Chocolate pump designed for pumping media with high viscosity DESMI delivers technically advanced pumping solutions for the Chocolate Industry. ROTAN® can offer a complete series of internally toothed gear pumps ...

Flow: 2 m³/h - 160 m³/h

... applications and markets. Design Features ESL pumps are single-stage centrifugal pumps equipped with mechanical shaft seal for maximum life and minimum friction loss. ESL pumps are ...

Flow: 10 m³/h - 85 m³/h

... seal. It is also available with cast iron and bronze materials. The NSA pump provides efficient performance at low cost. Close coupled self-priming NSA centrifugal pump The ...

Flow: 240 m³/h
Head: 62 m
Power: 0 kW - 34 kW

... Equipment/function Heavy-duty version made of grey cast iron Surface-cooled motor with Ex protection according to ATEX Winding temperature monitoring Scope of delivery Submersible sewage pump ...

Flow: 3, 1.2 m³/min
Head: 40, 54 m
Power: 1.5 kW - 11 kW

The KTZ-series is a submersible three-phase cast iron high head drainage pump. The cast iron body with high-chromium cast iron ...

Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW

The KTZE-series is a submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically ...

Flow: 4, 12 m³/min
Head: 24, 36 m
Power: 2.2 kW - 22 kW

The KRS-series is a submersible three-phase cast iron high volume heavy-duty drainage pump driven by a 4-pole motor. The cast iron body, combined with ...

Flow: 20 m³/h - 500 m³/h

... cast-iron, divided in two halves with protective lining made in our special antiwear moulded rubber (composed of interchangeable shells adjustable from outside). The impeller is anticlogging, open type ...

Flow: 20 m³/h - 450 m³/h

... Bodies are in cast-iron, divided in two halves with protective lining made in our special antiwear moulded rubber (composed of interchangeable shells adjustable from outside). The impeller is anticlogging, ...

Flow: 6 m³/h - 120 m³/h

... spheroidal cast-iron with supwards suction mouth as to allow the income of particularly thick muds to the impeller. The impeller is with channels in spheroidal cast-iron. ...

Flow: 20 l/min

Hand pump N-02 for acids, alkalies and water-based chemicals Material:PP + SS(shaft) Max flow-rate:0,45 l/stroke Lenght:340 to 900mm Seals:FKM

Flow: 0 m³/h - 5,000 m³/h
Head: 0 m - 280 m
Power: 0 kW - 1,200 kW

High efficiency and reliability provide a pump with minimal maintenance costs. The pump can also be supplied coupled to a diesel engine. Various types of mechanical and soft shaft seals (standard). Applications: ...

Flow: 0 m³/h - 2,300 m³/h
Head: 0 m - 97 m
Power: 0 kW - 400 kW

One of the widest product ranges on the Made in Italy market, used for firefighting, heating and cooling systems, water supply, irrigation, industry and the naval and mining sectors. Various types of mechanical and soft shaft seals (standard) ...

Flow: 0 m³/h - 4,000 m³/h
Head: 0 m - 300 m
Power: 0 kW - 1,200 kW

... and produced in Italy, as proven by the short delivery times. High efficiency and reliability provide a pump with minimal maintenance costs. The pump can also be supplied coupled to a diesel engine. Various ...

Flow: 50 m³/h
Pressure: 5 bar - 10 bar

The product features a outstanding self-priming capabilities and it has legendary ruggedness. The A series pumps keeps up their starting execution level over time without any change,much obliged the programmed clearance. ...

Flow: 15 m³/h - 110 m³/h
Pressure: 12 bar

... the performance of the device constant all through time. The pumps can be removed in situ without the need to disconnect the suction and discharge lines. The pump body is made of cast ...

Flow: 80 m³/h
Pressure: 8 bar

The CC8 is the solution for petroleum product transfer on tanker (Up to 80 m3/h) 8 bars. It is compact and can fits in narrow spaces with dual ended shaft facilities the mounting depending on the rotation direction and ...

Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also ...

Flow: 0.28 l/min - 14.81 l/min
Pressure: 0 bar - 1 bar

The High Pressure Pumps (MO series) from Maximator is a single- or double-acting pump with a single-air drive head. They are light-weight, rugged and provide different pressure ratios up to 1,000bar. ...

Flow: 1.08 l/min - 9.38 l/min
Pressure: 0 bar - 1 bar

... ideally made for applications that need a quick response time. They are made out of cast iron bodies, tool steel plungers and polyurethane seals. The High Pressure Pumps-S series ...

Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m

Series CBT represents horizontal, single-stage volute casing pumps designed in compliance with ISO2858 / EN22858 pumps high temperature liquids(> 200 ºC) and offer special execution with center line feet ...

Flow: 1,200 m³/h
Pressure: 10 bar
Head: 100 m

... of horizontal, single-stage volute casing pumps are designed according to ISO2858 / EN22858 and enlarged sizes and feature full dismantling of the bearing unit towards the drive end without removing the pump ...

Flow: 1,800 m³/h
Pressure: 16 bar
Head: 140 m

... made of grey cast iron and stainless steel materials. They are available in sizes which are constructed in compliance to DIN 24255 / EN 733 specifications. An additional 19 different dimension is also ...

The EZstrip™ Transfer Pump is the latest revolutionary new pump design which can be 'Maintained-in-Place' (MIP), making a day-long maintenance operation become a 30 minute job. Description For the newest ...

... speed for accurate dosing. Features/Benefits Available in cast iron or stainless steel, with a choice of rotor and stator materials A high pressure pump eliminating the need for a series ...

The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. Description The Epsilon Pump incorporates ...

Flow: 10 l/min - 1,200 l/min
Head: 18 m
Power: 1.85 kW - 17.6 kW

... transferring liquids containing impurities up to 4 mm in size. Their hydraulic components: impeller and feed screw in cast iron, pump body in steel allow them to be used with water, emulsions ...

Flow: 5 l/min - 65 l/min
Head: 5 m
Power: 0.15 kW - 1.1 kW

... transferring liquids containing impurities up to 3 mm in size. Their hydraulic components: impeller and feed screw in PBT, pump body in cast iron allow them to be used with water, emulsions ...

Flow: 5 l/min - 80 l/min
Head: 6 m
Power: 0.15 kW - 1.9 kW

This range of pumps are ideal for moving liquids with contaminants that measure a maximum of 2-3 mm. They are fitted with hydraulic components, which are the impeller, scroll in PBT and the cast iron ...

Flow: 150 us gal/min - 400 us gal/min
Pressure: 40 psi - 250 psi

Single stage, end suction firefighting pumps. NFPA-20 design. UL Listed and FM Approved.

Flow: 150 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 355 psi

Horizontal, single and two stage, split case fire pumps. NFPA-20 design. UL Listed and FM Approved. Available with electric or diesel drive, both in 50 Hz and 60 Hz. It is available as a single pumping ...

Flow: 0 m³/s - 0.1767 m³/s
Head: 37 m

The SWP pump line comprises self priming pumps with capabilities to handle clear liquids or with solids. Its large volute design allows automatic repriming in an open system. Its design allows a simplified ...

Flow: 100 m³/h
Pressure: 10 mbar

N121 DEPRESSOR Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 40 m³/h
Pressure: 10 mbar
Power: 1.1, 1.5 kW

EN46 ELECTRO-DEPRESSOR Cast iron pumping unit coupled to the electric motor via an elastic coupler. Equipped with a support base, air intake check valve and cooling fan. Accessories: ...

Flow: 60 m³/h
Pressure: 10 mbar
Power: 2.2, 1.5 kW

EN76 ELECTRO-DEPRESSOR Cast iron pumping unit coupled to the electric motor via an elastic coupler. Equipped with a support base, air intake check valve and cooling fan. Accessories: ...

Flow: 1,500 m³/h
Pressure: 4.5 bar
Head: 45 m

The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chrome alloy, SA05, 27%, ASTM532. They are ...

... hot spring circulation application. Pump casing and impeller are made of CFPP(POM) material which is heat-resistant and corrosive-resistant for hot spring. It can avoid rusting problem with stainless steel or cast ...

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks

Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications

Flow: 0.5 l/s - 8 l/s
Head: 1 m - 57 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / High manometric head Clean, rain and seepage water Suitable for applications in agriculture, irrigation and fish farming

Flow: max 20400.0 l/h
Pressure: max 8.3 bar

The range of air operated diaphragm pumps Techni-flow metal TFX400 is available in many materials including aluminum, cast iron and stainless steel, this variety allows the range of pneumatic ...

Pressure: 170 bar - 290 bar

... radial loads which permits to drive the pump using a pulley or a drive gear (spur or helical) installed on the pump shaft. Housing and covers for series ‘T’ pumps are made of cast ...