PTFE pumps

Flow: 3 l/min
Pressure: 0 bar - 240 bar

40C100 AIRLESS® PAINT PUMP This paint pump is perfect for Airless® applications and provides exceptional performance. Ideal for Airless® applications High efficiency pump for maximum ...

Flow: 3 l/min
Pressure: 0 bar - 240 bar

40C100 WB AIRLESS® PAINT PUMP This water-based (WB) type paint pump provides exceptional performance for high viscosity paints. Ideal for Airless® water-based applications High efficiency pump ...

Flow: 14.4 l/min
Pressure: 0 bar - 240 bar

40C260 AIRLESS® PAINT PUMP This Airless® 40C260 High Pressure Pump is designed for the application of water or solvent based with medium to high viscosity materials All stainless steel construction High ...

Flow: 0 l/min - 20 l/min
Pressure: 0 bar - 8.6 bar

Part of our Compact Series of pumps, our 1/4” pumps feature big performance in a compact package. They feature flow rates up to 5.3 GPM (20 LPM), a wide range of material ...

Flow: 0 l/min - 40.1 l/min
Pressure: 0 bar - 6.9 bar

3/8” non-metallic diaphragm pump The ARO nonmetallic 3/8” PD03P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...

Flow: 0 l/min - 197 l/min
Pressure: 1 bar - 8 bar

1” metallic air operated diaphragm pump The ARO metallic 1” PX10X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...

Flow: 2.3 l/h - 45 l/h
Pressure: 2 bar - 25 bar
Power: 30, 25 W

The new solenoid diaphragm metering pump gamma/ X is user-friendly and has an outstandingly long service life, just like its predecessor. An ingenious solenoid control measures the back pressure and protects the system ...

Width: 272 cm
Length: 411 cm
Height: 190 cm

... control units with filter pressure regulator, control pressure gauge and shut off valve: GSF10(L) with C2 To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Width: 272 cm
Length: 411 cm
Height: 191 cm

... control units with filter pressure regulator, control pressure gauge and shut off valve: GSF15(L) with C2 To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Width: 272 cm
Length: 400 cm
Height: 181 cm

... control units with filter pressure regulator, control pressure gauge and shut off valve: GSF25(L) with C2 To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar

ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...

Flow: 0 m³/h - 48 m³/h
Pressure: 0 bar - 7 bar

... multipurpose peripheral flow AODD pump The TopAir series is one of the most complete lines of Air Operated Double Diaphragm pumps on the market. With eight sizes up to 800 l/min in a wide range of material ...

Flow: 0 m³/h - 8 m³/h
Pressure: 0 bar - 25 bar

... HIGH VOLUMETRIC EFFICIENCY • Small radial and axial clearances – reduced slip • Optimized rotor/gear shape LESS DOWN TIME • Pumps and motors flanged to pedestals – correct alignment between pump ...

Flow: 500 l/h
Pressure: 20 bar

... sealed pump design Diaphragm head with mechanically operated PTFE double-diaphragm Diaphragm status control by hose nipple Materials (product wetted parts): Stainless Steel Pump ...

Flow: 2,827 l/h

... inquiry. Benefits Hermetically sealed pump design Optimal capacity adaptation to widely varying production processes Variable stroke length for each pump allows independent flow rate adjustment ...

Flow: 70,000, 65,000 l/h
Pressure: 400, 1,000 bar

... NOVAPLEX Vector process diaphragm pump combines the reliability of the Bran+Luebbe diaphragm technology with a compact unique gearbox design. This allows for the use of a process diaphragm pump ...

Width: 220 mm - 900 mm
Length: 360 mm - 500 mm
Height: 450 mm - 800 mm

... low-pressure range. In principle, high-pressure pumps such as the LEWA ecoflow can also be used here, though it is usually not efficient to do so. Another important reason to use mechanically actuated metering pumps ...

Width: 1,572 mm - 1,572 mm
Length: 2,000 mm - 2,000 mm
Height: 1,680 mm - 1,680 mm

HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...

Flow: 14 l/h - 140 l/h
Weight: 8 kg
Pressure: 1 bar - 4 bar

... - TUBE PUMP / ALBIN PUMP Specifications: Flow rate: up to 140 l/h (97 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, NBR, ...

Flow: 34 l/h - 348 l/h
Weight: 9 kg
Pressure: 1 bar - 4 bar

... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 348 l/h (92 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, ...

Flow: 800 l/h
Pressure: 3 bar - 15 bar

Mouvex® Micro C Series Eccentric Disc Pumps have been designed for use in a wide range of pumping applications in the chemical and hygienic markets. They feature a unique seal-less design with stainless-steel ...

Flow: 60 m³/h
Pressure: 6 bar
Head: 35 m

... system of the bushings, the pump is resistant even to difficult conditions of use. PTFE / Carbon, graphite or SSiC bushings with ADLC treatment (diamond like coating) make the pump resistant ...

Flow: 60 m³/h
Pressure: 6 bar
Head: 35 m

... where intrinsic safety and "" 0 "" emissions are a priority. Reliability: PTFE / Carbon or graphite bushings make the pump resistant to dry running. Design: STN pumps are designed ...

Flow: 19 l/min - 660 l/min
Pressure: 7 bar
Head: 9.5, 9 m

... acids, solvents and petrochemical facilities. The Pure range is machined from a single block of virgin grade PE or PTFE. By machining the pump housing there are no welding points, which reduces material ...

Flow: 0 l/min - 19 l/min
Pressure: 0 bar - 7 bar
Head: 1 m - 9 m

... is a compact, high efficient air operated double diaphragm (AODD) pump, produced from one-piece solid pure PE or PTFE. Suitable for small transfer/drum emptying or as a basic dosing pump.

Flow: 0 l/min - 28 l/min
Pressure: 0 bar - 7 bar
Head: 2 m - 9 m

... is a compact, high efficient air operated double diaphragm (AODD) pump, produced from one-piece solid pure PE or PTFE. Suitable for small transfer/drum emptying or as a basic dosing pump.

Flow: 460 l/min
Head: 39 m
Power: 0.18 kW - 5.5 kW

In the UP-Do Pump Series, the motor power is transmitted without slip directly to the pump impeller with a rigid shaft (no magnetic coupling). A double mechanical seal (back to back) prevents the leakage ...

Width: 340 mm
Length: 840 mm
Height: 850 mm

... SONDERMANN has developed the SAFETEC pump set. The pump set contains all the components required for safe emptying of the container. Your advantages: - all components of the pump ...

Flow: 38 l/min
Weight: 1.9 kg
Pressure: 1.5 bar - 8 bar

Very compact and reliable polypropylene diaphragm pumps for medium to small volume transfer , dosing, spraying and dispensing a variety of fluids. Typical applications are transferring ...

Flow: 50 l/min
Weight: 3.5 kg
Pressure: 1.5 bar - 8 bar

Air operated double diaphragm pumps for dosing, spraying, transferring, evacuating and distributing a wide variety of fluids. Ideal for standard applications with small to medium flow rates. Very robust ...

Flow: 10 l/min

... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction that is capable ...

Flow: 20 l/min

... containers and air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump ...

The mini solvent pump is provided with an enhanced quality hand pump, applicable for small containers like bottles, canisters and tanks with a maximum capacity of 5 liters. ...

Flow: 11 l/min - 13 l/min
Pressure: 220,000 Pa - 250,000 Pa

... diaphragm, newly-designed valves and sealing systems, precise placement of the pump head Extreme chemical resistance The use of chemically resistant materials optional such as PTFE FKM or other ,material ...

Flow: 0 l/h - 0.4 l/h
Head: 10 m

■ Overview TOPSFLO micro diaphragm liquid /vacuum pumps are based on a simple principal,the circular power from the motor is converted into oscillating movement by aneccentric, which moves up and down ...

Flow: 450 l/min
Pressure: 8 bar
Head: 70 m

... from competitors' solid-block pumps. They are currently available in size 1/2", 1" and 1 1/2". A SUPERIOR MATERIAL QUANTUM pumps are available in solid-block PTFE, which is a superior ...

Flow: 52 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

... technology, ASTRAevo FOOD is a recent project too, conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, reducing at the lowest the maintenance necessities, ...

Flow: 24 l/min - 125 l/min

The Tapflo drum pump is ideal for mobile use. It is fitted with a drum tube in polypropylene (PP) or PTFE and a handle in stainless steel AISI 316L. The drum tube is delivered in any length up to 2 m. ...

... connection is mounted on the pump, for earthing of electrostatic loads. APPLICATION Transfer of alcohol and solvents are examples of applications for the Tapflo TX pumps All PE & PTFE ...

Flow: 0 l/min - 11 l/min
Pressure: 8 bar
Head: 0 m - 80 m

... TXR9 (ATEX version) are the smallest in the range of PE & PTFE diaphragm pumps. Ideal for dosing applications and pumping to small containers. The small size grants is also space saving ...