PTFE pumps

Flow: 460 l/min
Head: 39 m
Power: 0.18 kW - 5.5 kW

In the UP-Do Pump Series, the motor power is transmitted without slip directly to the pump impeller with a rigid shaft (no magnetic coupling). A double mechanical seal (back to back) prevents the leakage ...

Flow: 0 l/h - 1,600 l/h
Pressure: -0.8 bar - 2 bar

Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version IP20 Optionally ...

Flow: 0 l/h - 1,600 l/h
Pressure: -0.6 bar - 1.4 bar

Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version IP20 Optionally ...

Flow: 800, 400 l/h
Pressure: -0.6 bar - 2 bar

... emission 115 V - versions with FM C-US approval C-versions specifically for conveying flammable gasses Bypass valve for PTFE and VA pump body Gas analysis is key for safe and efficient system operation ...

Flow: 90 l/min - 800 l/min
Head: 0 m - 35 m
Power: 0.15 kW - 2.2 kW

... magnet pump which uses the pump casing divided into the front casing and the rear casing to form a vortex chamber as an ideal form. Therefore, the internal leak phenomenon, which means that the liquid ...

Flow: 50 l/min - 510 l/min
Head: 0 m - 30 m
Power: 0.26 kW - 2.2 kW

... magnet pump which uses the pump casing divided into the front casing and the rear casing to form a vortex chamber as an ideal form. Therefore, the internal leak phenomenon, which means that the liquid ...

Flow: 0.0075 l/h - 45 l/h
Pressure: 4 bar - 17 bar
Power: 17 W - 19 W

... comparable metering pumps. Resistance The combination of the non-elastomeric, durable PTFE diaphragm with outstanding permeation characteristics and the PVDF pump head ensures best ...

Flow: 5.2 us gal/h
Pressure: 73, 60 psi
Power: 84, 24 kW

Walchem and Iwaki have created a unique partnership with over 100 years combined pump experience in an array of different markets. The HV series is specifically designed to accurately feed high viscosity chemicals. Equipped ...

Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar

Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar

Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid ...

Flow: 3.5 m³/h - 17 m³/h

... Stainless-Steel Pumps for Sterile Applications Almatec® BIOCOR Series Air-Operated Double-Diaphragm (AODD) Pumps have been specifically designed for critical sterile applications within the pharmaceutical, ...

Flow: 400 m³/h - 8,500 m³/h
Pressure: 4.5 bar
Head: 3.5 m - 32 m

... horizontal installation check the ST pump model. Overview The STV vertical sewage pump is designed with a bearing bracket for direct drive with electric motor via flexible coupling. Support of the motor ...

Flow: 5.5 l/h - 1,000 l/h
Pressure: 10, 40 bar
Power: 0.18, 0.25, 0.37, 0.55, 0.75 kW

... , the Radix spring-return pump series offers the ideal solution for high-precision injection and metering of chemicals in multiple industrial applications. Available in both plunger and mechanical diaphragm heads, ...

Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...

... chemicals compatible with Viton and PTFE seals. The pumps moves 0,33 L per stroke. Chemical pump lever type (set of 2 pumps). Features Fast and simple liquid ...

Flow: 72 l/h - 2,200 l/h
Pressure: 0 bar - 8 bar
Fluid temperature: 85 °C - 130 °C

... material PTFE, Hypalon, NBR black, NBR white, EPDM black, EPDM white In the stator incorporated adapter for foot valves Easy and flexible handling by means of lifting bows. Discharge pumps ...

Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C

... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...

Flow: 63 m³/h
Pressure: 7 bar
Fluid temperature: 120 °C

The SLRT pump is a positive displacement rotary lobe pump designed to discharge food and sanitary products from a truck cistern as it can be driven by a hydraulic motor. The pump is characterised ...

Flow: 145 m³/h
Pressure: 10 bar
Head: 90 m

... close-coupled food-grade centrifugal pump with sanitary design, compact and efficient. It is made of a cold-formed stainless steel casing, stainless steel open impeller (investment casting), mechanical ...

Flow: 97, 71 l/min
Head: 20, 11 m
Power: 550 W

... and the pump tube acc. directives ATEX 2014/34/EU are required. The handy and powerful device can be used as a drive for the ATEX certified sealless pump tubes made of stainless steel (Ø 41 mm), the ...

Flow: 82, 61 l/min
Head: 9 m - 20 m
Power: 400 W

... drive motor and the pump tube acc. directives ATEX 2014/34/EC are required. The handy and powerful device (5,5 kg) can be used as a drive for the ATEX certified sealless pump tubes made of stainless ...

Flow: 93, 74 l/min
Head: 26, 11 m
Power: 640 W

... drive motor and the pump tube acc. directives ATEX 2014/34/EC are required. The handy and powerful device (6 kg) can be used as a drive for the ATEX certified sealless pump tubes made of stainless ...

Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W

... pressure strokes. Solenoid diaphragm pumps consists of the follwowing (main) components: Drive housing with solenoid Elektronics with connection on the control panel Built-in pump ...

Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm

... environments. Data Sheet: The pump head, made of stainless steel, is realized by the full; The body pump is made of stainless steel; Float made of foam; Sealing valves made of Viton and O-ring ...

Flow: 0 m³/h - 0.5 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 1 m

... hot-water recirculation pump designed for one- and two-family houses. Adapting to the usage pattern, the pump both provides maximum comfort and energy savings. Save your customers more money on their ...

Flow: 80 l/min
Pressure: 30 psi - 100 psi
Power: 20 W

... EP1310C 1/10 Gallon Single Cartridge Pump System is a powerful, medium-ratio system for controlled fluid transfer from 1/10th gallon (310 ml) plastic cartridges. Suitable for silicone-type fluids, this low-pulse pump ...

Flow: 4 us gal/min - 16 us gal/min
Pressure: 5.5, 6 bar
Head: 3.05 m - 4 m

... Purity Bellow Pump Furon A2 Pumps from Saint-Gobain feature a 100% PFA and PTFE wetted flow path which contain no metal parts or elastomeric seals, assuring compatibility with even ...

Flow: 50 l/min
Pressure: 6 bar
Fluid temperature: 65 °C

... double diaphragm pump from Sames designed for low-pressure circulating systems, capable of feeding multiple guns. Sames is proud to introduce the new 3.5:1 pump into our low-pressure range of pumps. This ...

Flow: 4 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Weight: 2.9 kg

The MultiFlow-35 MA is an electromagnetic pump with constant flow rate, manually adjustable via a potentiometer. The model (max flow rate/working pressure) can be selected by the user. Manual adjustment ...

Flow: 0 m³/h - 68 m³/h
Pressure: 0 bar - 6 bar
Head: 0 m - 35 m

Plastic and Fluoroplastic Lined Magnetic drive Horizontal Centrifugal pumps Sub-ISO designed. Lining: PP (Polypropylene), ETFE (Ethylene tetrafluoroethylene) Close-coupled execution Versatility: lthe ETN EVO offers ...

Flow: 0 l/min - 130 l/min
Pressure: 0 bar - 8 bar
Head: 4 m - 80 m

Air-operated double diaphragm volumetric pumps, ATEX – IECEx certified, constructed in polypropylene or PVDF in the plastic version or in aluminium or AISI 316 L for the metal versions. BOXER pumps are ...

Flow: 302 l/min - 1,043 l/min
Pressure: 8.6, 12.1 bar
Fluid temperature: -32 °C - 191 °C

... Vane Pumps, are part of the Iron Line of sliding vane pumps, feature and open-rotor design and have been specifically designed for the high-temperature transfer of thick, viscous fluids, including asphalts. ...

Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar
Fluid temperature: -30 °C - 130 °C

The HPP 200 is a very compact high-pressure pump that is particularly suitable for pressurization when pumping low-viscosity liquids. The basic version of the pump is designed for a continuous ...

Flow: 30 l/h - 6,000 l/h
Pressure: 0 bar - 250 bar
Power: 1.5 kW - 5.5 kW

... CEREX D metering pump, its double diaphragm design, combined with built-in failure detection, delivers superior leak prevention performance compared to single diaphragm pumps with a similar price point. ...

Flow: 0 us gal/min - 100 us gal/min
Pressure: 7 bar
Head: 70 m

... SANDPIPER 1½" S15 Non-Metallic AODD Pump provides unsurpassed fluid containment in the event a diaphragm is breached. This leak-free pump is designed to be driven by compressed air or nitrogen. Why ...