Aluminum pumps

Flow: 116 l/min
Pressure: 6 bar
Head: 36 m

... Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube Alu 41-L-SL made of aluminium, 2 m PVC spiral hose 1" and hose connections, ...

Flow: 95, 170 l/min
Pressure: 0 bar
Head: 25, 12 m

Drum pump for neutral, non flammable liquids Such as thin-bodied and slightly viscous mineral oils, diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc. Features: - Suitable ...

Flow: 87 l/min
Pressure: 0 Pa
Head: 19 m

... mPas Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube Alu 41-L-SL made of aluminium, 2 m PVC spiral hose 1" and hose ...

Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar

The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless steel, ...

Flow: 0 l/min - 197 l/min
Pressure: 1 bar - 8 bar

1” metallic air operated diaphragm pump The ARO metallic 1” PX10X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...

Flow: 0 l/min - 265 l/min
Pressure: 1 bar - 8 bar

2” metallic air operated diaphragm pump The ARO metallic 2” PX20X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...

Flow: 1,050 l/h
Head: 1.4 m
Power: 20 W

The HX 8810 is a dual use water pump which can be submersed or externally mounted. Designed for continuous use, the pump is capable of a number of applications, including pumping to supply oxygen, wave ...

Flow: 4,000 l/h
Head: 3 m
Power: 100 W

The HX 8840 is a dual use water pump which can be submersed or externally mounted. Designed for continuous use, the pump is capable of a number of applications, including pumping to supply oxygen, wave ...

Flow: 240 l/min

The universal F/FP 430 pump can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken ...

Flow: 220 l/min
Power: 800, 500 W

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, ...

Flow: max 10200.0 l/h
Pressure: max 9.0 bar

Available in aluminium and stainless steel this versatile 1 air operated double diaphragm pump is ideal for pumping a variety of waterborne and solvent based coatings including; Adhesives, catalyzed varnishes, ...

Flow: 720 l/h
Pressure: max 7.0 bar

... consistent pressure output and significantly reduced pulsation Pumps Shear-Sensitive Materials - Low internal velocities and gentle pumping action does not shear coatings Fast & Easy Servicing - Pump ...

... 85635 Air-operated, UL-listed Diaphragm Pumps. A result of Lincoln’s continuous effort to provide superior pump technology, the pumps deliver higher flow rates and greater solids handling ...

Flow: 19 l/min - 1,200 l/min
Pressure: 7, 8.4, 8.6 bar
Head: 2.4, 2.5, 3.7, 4.5, 4.9 m

The VA industrial range really does set the benchmark for air diaphragm pumps. The range features fast-acting air valve technology – eliminating wasted air and using all of the air for moving the fluid. The efficient ...

Flow: 0 l/min - 1,135 l/min
Pressure: 0 bar - 8.6 bar
Head: 2.4, 8.5 m

... metallic pump is a compact, high efficient air operated double diaphragm (AODD) pump suitable for larger transfer/container emptying or as a basic dosing pump. The VA industrial range ...

Pressure: 0 bar - 4,000 bar

... two-speed hand pumps for very high pressure up to 4000 bar PMS-PDS Series are the FPT hand pumps on very high pressure. • Hand pumps with two speeds from 1600 bar to 2800 bar, also ...

Flow: 1 l/min - 12 l/min
Head: 10 m
Power: 0.16 kW - 0.3 kW

The Sacemi Gamar pump is manufactured with a aluminium pump body, cast iron base and the hydraulically driven brass scroll, and is suitable for transferring liquids such as emulsions ...

Flow: 5 l/min - 125 l/min
Head: 27 m
Power: 0.54 kW - 0.95 kW

... and Gamar pump is a high quality device, ideal for transferring impure liquids (which may contain impurities around to 2-3mm) up to ninety degrees Celsius. The hydraulically driven brass impeller combined with the aluminium ...

Flow: 162 l/min
Head: 100 m
Power: 1.5 kW - 5.6 kW

... 100 can pump fluids with temperatures not exceeding 90°C. The equipment is suited for transferring of liquids that contain impurities that measure up to 2mm. The hydraulic features of the product are comprised of a brass ...

Flow: 610 l/min
Pressure: 2 bar - 6 bar
Head: 5 m

Diaphragm pumps R. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

Flow: 610 l/min
Pressure: 2 bar - 6 bar
Head: 5 m

Diaphragm pumps R. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

Flow: 170 l/min
Pressure: 2 bar - 6 bar
Head: 5 m

The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models have been designed ...

Flow: 0 l/min - 200 l/min
Head: 0 m - 70 m
Power: 0.81 kW - 8.1 kW

The TE is a dewatering pump engineered by Tsurumi Pump. It is suitable for use in irrigation, sprinkler, cleaning, and dewatering of storm water, ground water, or puddles at construction sites. The ...

Flow: 0 l/min - 55 l/min
Head: 0 m - 7.38 m
Power: 0.48 kW

... self-priming residue dewatering pump that has a submersible motor. Its suction component allows the pump to drain water down to floor level. The pump is integrated with a siphon breaker ...

Flow: 0 l/min - 55 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

FLUIMAC® manufactures new types of pumps that are developed around air distribution system, the technology of the diaphragm, the geometry of pumping compartments and the system of the valves. This innovation enhances ...

Flow: 0 l/min - 170 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

The PF160 features a 1" BSP connection and a 70 m air connection. It has a maximum flow rate of 160 l/min and a maximum head of 1/2" BSP. It also has a maximum pressure of 7 bar, self priming capacity of 6 m and 7.5 mm diameter of passing solids.

Flow: 0 l/min - 380 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

AIR OPERATED DOUBLE DIAPHRAGM PUMP, 380 lt/min, 1"1/2 Dn 40 CONNECTIONS Connection 1"1/2 BSP Dn 40 Max flow-rate 380 lt/min Air connection 3/4" BSP Max head 80 m Self-priming capacity 5 m Diameter passing solids 8 mm Max ...

Flow: 1 l/h - 80 l/h
Pressure: 1 bar - 20 bar

... BTB - pump body construction of Anti-acids mica-filled reinforced polypropylene. BT - pump body pump housing is constructed of cast Aluminium, protected by double coats of Epoxy paint. Excellent ...

Flow: 7 l/h - 490 l/h
Pressure: 2.5 bar - 16 bar
Power: 0.25 kW - 0.37 kW

... with CE regulations - Die-cast aluminium housing protected by epoxy/anti-acid paint - Flow rate is achieved by by operation of a dial control to adjust the stroke length rate from 10%-100% - The vertically motor drives ...

Flow: 204 m³/h
Pressure: 19, 10 bar

The PSG Isoil is a MOUVEX metering solution. This device is equipped with vanes that are usually used in pumps and compressors. The vanes equipped in the metering solution provides the device of a matchless and long-lasting ...

Flow: 0.4 m³/h - 10 m³/h
Pressure: 0 bar - 4 bar
Power: 1.1 kW - 2.2 kW

Specifications : Flow rate : 0,4 to 10 m³/h Discharge pressure : up to 4 bar Maximum suction lift : - 9 mCe Suction / discharge : Inserts nipples or flanges SS, PTFE Ø45 - 60 mm Hoses* : Polyamide reinforced NR/EPDM/NBR/VITON HYPALON/NR Food

Flow: 70 l/min - 100 l/min
Head: 6 m - 12 m
Power: 420 W

Product Details Pump Tube Material: PP Pump Shaft Material: Hastelloy Pump Pipe Length: 1200 or 1000 mm Diameter of Pump Pipe: 41mm Sealing: Non-seal, exact solution! ...

Flow: 70 l/min - 100 l/min
Pressure: 6 bar
Head: 6 m - 12 m

Product Details Pump Tube Material: SS316 Pump Shaft Material: SS316 Pump Pipe Length: 1200 or 1000 mm Diameter of Pump Pipe: 41mm Sealing: Non-seal, exact solution! Fan ...

Pressure: 0 bar - 7 bar
Head: 70 m

... AREAS OF USAGE MIT diaphragm pumps can also be used as submerged pumps. To do this air release pipe should go above the water level to keep pumps exhaust for releasing the air. Materials: Body: ...

Flow: max 20400.0 l/h
Pressure: max 8.3 bar

... products. etc. TFG400 the pump is the smallest of the big pumps, this pump range the advantage of being easily transportable by one person, in case your application requires more flow ...

Flow: max 39000.0 l/h
Pressure: max 8.3 bar
Head: max 8.3 m

... fluid flow velocity and to lessen the wear of the pump by abrasion . The shipbuilding industries are also user of pneumatic diaphragm pump 2 " but also for reasons of size and weight of the model tire ...

Flow: max 7980.0 l/h
Pressure: max 8.3 bar

... presses high pressure oil pump used cutting . and many other applications of pneumatic pumps . If the specifications of this pump range are too far from your application we probably ...

Flow: 17 l/min
Pressure: 8 bar
Head: 80 m

BOXER 15 diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids.

Flow: 30 l/min
Pressure: 8 bar
Head: 80 m

MICROBOXER diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids.

Flow: 50 l/min
Pressure: 8 bar
Head: 80 m

BOXER 50 diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids.

Pressure: 1 bar - 8 bar

Ecco Flow ALT15 is a metallic diaphragm pump with small dimensions but still high performance. The pump housing is made in aluminium. All components in direct contact with the fluid, ...

Flow: 0 l/h - 1,000 l/h
Pressure: 100 bar

... from 10 to 100% stroke FEATURES Zero leakage plunger pump Robust, compact reliable design Easy handling minimum maintenance ADJUSTMENT Stroke adjustment while running or stopped 0-100% Standard micrometric ...

Flow: 50 m³/h
Pressure: 7 bar

... advantages: Pumps suited to the transfer of aggressive and/or viscous liquids. Plastic pumps are recommended for strong acids and for bases. Metal pumps possess good resistance to ...

Flow: 50 l/min
Pressure: 7 bar

Pneumatic diaphragm pump - PP1/2 SAN Characteristics: Body : PP Membranes : santroprene Bowls : PTFE Weight : 2,8 kg Orifices 1/2" Pressure : 7 bars Suction height: 6 m (dry), 8 m (wet membranes) ...

Flow: 9.6, 3.3 m³/h
Pressure: 7.7 bar

... pneumatic membrane pump is constructed in aluminum composition, with the integration of buna-N, neoprene, viton, EPDM and Polytetrafluoroethylene materials. It operates through enabling transfer of intense ...

Flow: 48, 47 l/min
Pressure: 1.85 psi
Power: 41, 45 W

... which are well-known in the worldwide as the features of reliable, durable and better cooling efficiency as its aluminum body. DB series pumps are used to provide oxygen in sewage treatment, aquariums, ...

Flow: 68, 66 l/min
Pressure: 2.13 psi
Power: 63, 61 W

The stylish aluminum body of DBM series provide a better cooling efficiency with reliable, long lifespan, low power consumption and are equipped with thermostat to prevent pumps from overheating to cause ...

Flow: 68 l/min
Pressure: 2.13 psi
Power: 64 W

... which are well-known in the worldwide as the features of reliable, durable and better cooling efficiency as its aluminum body. DB series pumps are used to provide oxygen in sewage treatment, aquariums, ...

Flow: 17 l/min - 1,041 l/min
Pressure: 7 bar

Air diaphragm pump (also called Pneumatic Diaphragm Pump) is a positive displacement pump that uses a combination of the reciprocating action of a diaphragm and suitable valves on either ...

Flow: 0 l/min - 820 l/min
Pressure: 8 bar

... sized pump available in aluminium and stainless steel AISI 316L. It has a max capacity of 820 l/min. Aluminium and cast iron pumps For transfer of pH-neutral fluids, ...

Aluminium pump include all wetted parts coated with non stick PTFE, is equipped with stainless steel in/outlet ports. The model was developed for the printing industry where a low price alternative of ...

Flow: 0 l/min - 78 l/min
Pressure: 8 bar
Head: 0 m - 80 m

T70 and ATEX approved TX70 is a mid sized pump available in aluminium cast iron and stainless steel AISI 316L. With the compact dimensions 150×168×229 it has an impressive max capacity of 78 l/min.