Industrial pumps

... dewatering pump design offers a high head option exceeding 130 metres, encompassing the speeds for diesel and electrical driven applications. The Warman® DWU dewatering pump has been developed to enhance ...

Flow: 18,180 m³/h
Pressure: 125 psi
Head: 32 m

The newest Warman® GSL Pump by Weir Minerals is a gas scrubber pump that was innovatively designed to provide high-quality performance. This pump has a back pull out and modular design ...

Flow: 9,100 m³/h
Pressure: 580 bar
Head: 67 m

Warman® HTP Pumps are utilized for extreme multi-stage applications, and deliver a variety of quick maintenance features. These fully lined pumps are the highest pressure-rated pumps ...

Electric Compact Pump for use with single-line systems ECP The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line ...

Pressure: 300 bar

SKF KFG piston pump unit for wind turbines has been especially developed for the wind industry. The design is based on SKF's proven KFG series of pumps, which are widely used across the globe in a variety ...

Flow: 1.2, 2.5 l/min
Pressure: 30, 20 bar

The Multi-circuit pump units introduced by SKF are ideally designed to function as gear pumps. They offer choices for pump installation such as units for assembly disconnection from the ...

First among polyurethane machinery manufacturers to develop its own pump more than a decade ago, Cannon has engineered the perfect piston pump to process polyols and isocyanates. Features: •Lower ...

Flow: 1 l/min - 6 l/min
Pressure: 80 Pa

Transfer pumps: Feed material directly from original containers Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer pump. ...

Flow: 0.6 l/min - 6 l/min
Pressure: 20 bar - 400 bar

Drum pumps: High performance piston pumps This drum pump model is available exclusively as a double-acting chop check pump. Along with grease and oils, it also processes ...

... www.dopag.com/products/metering-components-pumps/drum-pumps/pumps-for-lubricants/configurator-for-drum-pumps/ For more detailed information please visit our website ...

The new solenoid-driven metering pump gamma/ XL is the enhancement to our proven gamma/ X and covers a capacity range from 8 – 80 l/h at 25 – 2 bar. The gamma/ XL also has other interfaces, for example CAN bus and Wi-Fi ...

... intelligent peristaltic metering pump. ProMinent is making use of its decades-long experience in the metering pump sector to bring together the best of two worlds. Valve-free metering with the accuracy ...

Flow: 1,079 l/min
Pressure: 8.3 bar

NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP! 3” NON-METALLIC PUMP MODEL ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...

Flow: 1 l/min - 696 l/min
Pressure: 2 bar - 8.3 bar

2'' EXP Non-Metallic Air Operated Diaphragm Pump PD20E-FES-PAA Conductive PVDF ARO® EXP air operated diaphragm pumps with bolted PVDF and conductive PVDF wetted parts offer best in class features ...

Flow: 1 l/min - 200 l/min
Pressure: 2 bar - 8.3 bar

... 1” non-metallic diaphragm pumps are a versatile solution for numerous applications. Our EXP 1” models achieve flow rates of up to 53 GPM (200.6 LPM) and offer a wide array of material and porting configurations. These ...

Flow: 30 l/min
Pressure: 0.15 bar
Power: 25 W

The Enviro ET30 air pump helps to increase the amount of oxygen in the water. Providing a clean oil free air source, it is exceptionally quiet in operation, as low as 35dB even when running continuously. The ET30 is ...

Flow: 8 l/min
Pressure: 2 bar

... Rated for continuous operation, the Dymax Series is whisper quiet and ruggedly reliable. The diaphragm pump is housed within a clean, tough and compact polycarbonate case which conforms to IEC 1010 for safety.

Flow: 1.6 l/min
Head: 20 m

... Centrifugal pumps incorporate a rotary impeller which draws the liquid into the inlet. The centrifugal action forces the fluid to the extremities of the chamber and through the outlet at pressure. Due to their valveless ...

Flow: 383 l/min

To pump heavy flammable liquids from containers, tanks and open containers. The pump is available in two versions with open conical impeller or a closed centrifugal impeller in different sizes. Technical ...

Flow: 383 l/min
Power: 0.75 kW - 4 kW

... open containers etc. The pump is used either horizontally mounted onto a base plate or fixed vertically.Technical data: Flow rate: max. 383 l/min1 Delivery head: max. 12 mwc1 Viscosity: min. 1 mPas - max. 2500 mPas1 Diameter ...

Flow: 733 l/min
Power: 0.75 kW - 4 kW

... open containers etc. The pump is used either horizontally mounted onto a base plate or fixed vertically. Technical data: Flow rate: max. 733 l/min1 Delivery head: max. 33 mwc1 Viscosity: min. 1 mPas - max. 2000 mPas1 Diameter ...

Pressure: 250 bar

GMG-B Pump aggregate ................................. Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,08 / 0,16 max. delivery pressure in bar: 250 Number of outlets: 1...2 / 6...20 Tank ...

Pressure: 250 bar

GMA-B...-C Piston pump ............................... Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,08 / 0,15 / 0,22 max. delivery pressure in bar: 250 Number of outlets: 1...4 Tank ...

Pressure: 80 bar

Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,04 max. delivery pressure in bar: 80 Number of outlets: 1...6 Tank size in l: 0,38

... Fluid Solutions' pumps are built to last! Our seal-less design makes our pumps leak-proof, and virtually maintenance free. They are environmentally resistant to hot water spray, salt, fog, shock and vibration. ...

DurA-Tek Prime is our new booster pump for the school transportation industry. This pump features a magnetically coupled, seal-less design that eliminates leaks improving overall quality, reliability, ...

Flow: 20 us gal/min

Features Pump • Seal-less design for long life • Wet Rotor Design • Cast aluminum pump casing Motor • 24 VDC motor versions available • Efficient brushless DC motor • Environmentally sealed (IP 67) Wear ...

Flow: 124 l/min
Pressure: 6 bar
Head: 35 m

... Viscosity:max. 1000 mPas Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube SS 41-L-SL made of stainless steel, 2 m solvent ...

Flow: 124 l/min
Pressure: 6 bar
Head: 35 m

... Viscosity:max. 1000 mPas Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube SS 41-L-SL made of stainless steel, 2 m universal ...

Flow: 124 l/min
Pressure: 6 bar
Head: 35 m

... Viscosity:max. 1000 mPas Immersion depth: 1,000 mm (for emptying drums) 1,200 mm (for emptying containers) Pump set consisting of: Motor, pump tube RE-SS 41-L-MS made of stainless steel, 2 m ...

Flow: 9,000 m³/h
Pressure: 40 bar
Head: 190 m

ANDRITZ single-stage centrifugal pumps from the ACP series are available in a highly wear-resistant, open impeller design. Thanks to their low axial thrust and open channels, these pumps are suitable ...

Flow: 10,000 m³/h
Pressure: 15 bar
Head: 100 m

The SD series from Andritz is designed to be utilized in the waste water industry. It is a single-stage, channel impeller. It has a free passage of up to 200 mm, heads of up to 100 m and a flow rate of up to 10,000 m³/h. It also has a ...

Flow: 900 m³/h
Pressure: 100 bar
Head: 800 m

The Andritz submersible pumps, SU and HDM series are versatile and ergonomically designed pumps that enable an ideal energy consumption by moving the fluid for mechanical operations. Thousands of ANDRITZ ...

Flow: 2.6, 5.1 l/min
Pressure: 10 bar

02C85 Airspray Paint Pump Thanks to its compacity, the 02C85 pump saves waste during flushing and quick color changes. The fluid section special design combined to GT seals allow priming at very low pressure ...

Flow: 7.2, 14.4 l/min
Pressure: 24 bar

Paint circulation pump for medium or low pressure applications. Description - Stainless steel construction - Designed for medium viscosity materials - Extended lifetime Performance: - High output ...

Flow: 7.2, 14.4 l/min
Pressure: 24 bar

Flowmax® paint pump for medium to low pressure applications. Description - Zero maintenance: FLOWMAX® technology - Designed for moisture-sensitive & abrasive materials - Extended lifetime Performance: - ...

The LAGP400 Grease packer by SKF is designed to lubricate open bearings. This packer has a reduced pressure option for utilizing most of the content of SKF grease cartridges. A 3 spout caps is also includes in this unit. For manual grease ...

... loading. The piston design enable for the smoothly emptying of the cartridges. This gun t is suitable for utilization in industrial, agricultural and construction industries as well as for private usage. It also convenient ...

The SKF Easy grease filling gun contains a 175 mm long extension pipe with a gripping nozzle. It suits the greasing need for cartridges and slight items that has loose grease. This device has a unique piston design that allows a smooth ...

Flow: 16.2 l/min - 150 l/min
Pressure: 0 bar - 275 bar
Power: 1.3 kW - 54.4 kW

Hydraulic mobile pump T6CCZ series is specially designed for Cardan mounting. The double row ball bearing and a needle bearing double the permissible radial load compare to standard version capability. Product Overview Parker's ...

Exair reversible drum vacuum system is driven by air pressure, and can be easily mounted to an assembly with a closed head compartment. Its heavy-duty vacuum engine allows filling of a drum with 55 gallon capacity in less than two minutes. ...

Pressure: 5 psi
Power: 2 W - 2.5 W

The LPL Series of Fixed Volume Dispense Pumps are solenoid driven, chemically inert, positive displacement pumps, which provide accurate and repeatable dispense volumes of 25 to 50 µL in a small ...

Pressure: 15 psi - 115 psi
Power: 68 kW

... the Lee 200 Series Positive Displacement Pump. Its unique radial piston design aids in self-priming at altitude and reduces cavitation. The 200 Series Pump provides high flow and pressure capabilities ...

... quantity according to requirements. The pumps are vertical multi-stage high-pressure centrifugal pumps with a fully enclosed, fan-cooled motor. They are designed especially for use in shell boilers. The ...

The oil supply module is used for extracting and filtering fossil fuels in ring mains for supplying one or more burners. It is preassembled in an oil collection vessel together with all fittings to form a single or double station for ...

... atomiser burners with a spill back atomiser system. The oil circulation module is preassembled on a support plate to form a compact unit and supplied with a protective cover. This module consists of a two-chamber ...

In order to stand up to the tough offshore environments, HYTORC has taken our tried and true high flow pneumatic pump and reconstructed it with stainless steel components. Additionally, we have doubled the size of the ...

Pressure: 1,500, 2,500 bar

The PES pump is HYTORC's workhorse tensioning pump. It has the ability to run multiple tools without sacrificing performance. It is reliable and gives our customers consistent results day in and day ...

Flow: 0 l/min - 10 l/min
Pressure: 30 bar

... Series of tension pumps are our latest design for the tensioning market. This pump was designed with maintenance technicians in mind. With a smaller footprint, HY Series tension pumps ...

Flow: 0.71 m³/h - 0.74 m³/h

... size68 Rotor surfacePainted black Terminal box materialGlass-fiber reinforced plastic Pump impeller materialGlass-fiber reinforced plastic Agitator materialPE Pump housing materialGlass-fiber reinforced ...

Power: 48 W

Weight2.0 kg Housing materialShaft: Stainless steel 1.4305 Insulation classF ModeS1 Protection classI (with customer connection of protective earth)

Power: 22 W

Weight0.70 kg Insulation classB ModeS1 CableFlat plug 6.3 x 0.8 Protection classI (with customer connection of protective earth)

Flow: 2 m³/h - 18 m³/h
Pressure: 1 bar - 5 bar

These small pneumatic suction pumps have evolved from the innovative bringing together of smart components: a pressure adjuster, pressure gauge combine, and a vacuum creator of the M SSX series which ...

Flow: 15 m³/h - 320 m³/h
Pressure: 1 bar - 6 bar

At the cutting edge of technological advancement, this pneumatic suction pumps features a splendid ratio between the amount of used and sucked air, and has the ability to adjust the vacuum level and capacity according ...

Flow: 2.7 m³/h - 31 m³/h
Pressure: 0.1 bar - 0.7 bar

... inlet of the suction connection of a vacuum producer of the M.. SSX lineup had permitted development of these compact pneumatic suction pumps. They ship with an extensive list of notable features to include ...

Flow: 252 l/h
Pressure: max 7.0 bar

The pump's acetal body, with its soft seats and st. st. balls, offers universal paint compatibility, including ceramic glaze coatings. The diaphragm's innovative design, with built-in fluid regulator, offers constant ...

Flow: max 450.0 l/h
Pressure: max 6.0 bar

... the ceramic coated pistons and tungsten carbide ball seats. In addition to high-quality materials, the construction of the pump includes surface treatments. Preventative maintenance is not required since there are ...

Flow: max 10200.0 l/h
Pressure: max 9.0 bar

Available in aluminium and stainless steel this versatile 1 air operated double diaphragm pump is ideal for pumping a variety of waterborne and solvent based coatings including; Adhesives, catalyzed varnishes, paints, ...

Pressure: 60 bar

... High Pressure Pumps from SPX have a maximum working pressure of 60 bar, similar to some reverse osmosis structures. Designed with a rigid structure, this model ensures stable performance with minimal vibration during ...

... distinguished among inducer pumps. The pump is further enabled by the inducer to handle gaseous or viscous products that other centrifugal pumps would not be able to handle.

Pressure: 5,000 psi

Quicklub Pumps With RemoteLinc Capability Lincoln has introduced its new P203 RemoteLinc™ pump for fleets using telematics. Designed to communicate with wireless systems, the unit combines the proven ...

Pressure: 0 psi - 5,000 psi

Lincoln offers a range of rotary pump technology, one of which is the AC. The AC model is a lubrication gear pump developed without air or hydraulics. It can be used with a power supplies ranging from ...

Pressure: 0 bar - 345 bar

The pump line that's changing lubrication systems around the word is going electric. Now you can specify a 24VDC powered pump for applications in construction, mining, and industry. The same Rotary Technology ...

Flow: 0.74, 0.71 m³/h
Head: 7.2, 6.1 m
Power: 70, 58 W

The P2E070-AA26-01 is an AC pump manufactured by EBMPAMPST. It weighs 1.6 kg and 70 mm in size. Its surface motor is coated in black. Its terminal box, impeller, pump housing, and cross-member are all ...

Power: 48 W

The P30-4330 which is manufactured by ebmpapst, is a submersible pump for low-viscosity media drive through capacitor motor KM43 which features several specifications/properties including an approximate weight of 2 kg, ...

Power: 22 W

EBM Papst's P5-3020 AC Pumps are evacuation pumps generally utilized for conveying minimal-viscosity media (condensate, water, soap-and-water blends, etc.). These pumps feature integrated ...