Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling pump ...
Casella
Flow: 2 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling pump ...
Casella
Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling pump ...
Casella
Flow: 0.01789 l/min - 0.12151 l/min
Fluid temperature: -30 °C - 85 °C
Length: 170 mm
... programmable single-channel pump designed to meet a wide range of fluid handling needs. With its robust capabilities and precision performance, it stands as a reliable solution for various applications in research, pharmaceuticals, and ...
Inovenso Inc.
Flow: 0.01789 l/min - 0.12151 l/min
Fluid temperature: -30 °C - 85 °C
Length: 170 mm
... The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers ...
Inovenso Inc.
Flow: 0.01789 l/min - 0.12151 l/min
Fluid temperature: -30 °C - 85 °C
Length: 170 mm
... The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance ...
Inovenso Inc.
Flow: 0 m³/h - 13.2 m³/h
Pressure: 0 bar - 8 bar
Head: 2 m - 8 m
... operated diaphragm pump is an environmentally friendly alternative to the traditional air-operated diaphragm pump. It is designed for gentle pumping of the most aggressive media, including those containing abrasive particles. This ...
Tapflo
Flow: 10 m³/h
Pressure: 4 bar
... LOW PRESSURE HOSE PUMPS Reduce maintenance downtime... Suitable for pumping and dosing low or high viscous, pasty, pure, neutral, aggressive or abrasive liquids, those containing gases or which tend to froth or those ...
Tapflo
Flow: 150 m³/h
Pressure: 15 bar
... HIGH PRESSURE HOSE PUMPS The latest design PT pumps combine the best available materials with smart design solutions in order to maximise running time and minimise maintenance. The PT series pump is ...
Tapflo
Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to ...
Maximator GmbH
Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...
Maximator GmbH
Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...
Maximator GmbH
... B.SMART Simple and intuitive – the new Tank Data Management System with access control via Bluetooth from the driver’s smartphone. - Everything under a single part number: fuel dispenser, access code for the web app, and licences for driver/user. - ...
CEMO
... Hand pump 25 l/stroke Order-number: 1452 Details Hand pump, accessories for UNI- and MULTI-Tank, pumps and accessories specially adapted for DWT diesel filling stations -robust ...
CEMO
... Steel drum- pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be shortened as required ...
CEMO
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... inverter allows 4HS to: Change pump speed to maintain set-pressure regardless of water demand. Consequently the pump is operated only when and as needed without wasting energy, thereby extending pump ...
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, China University ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... and corrosion conditions. Different product structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. There are also various impeller ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m
... TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, and the shaft seal ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 20 l/min
Pressure: -0.187 bar - 0.18 bar
Power: 21 W
... The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, it operates ...
Nitto Kohki Europe
Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W
... The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure and 0.1 bar rated ...
Nitto Kohki Europe
Flow: 7 l/min
Pressure: -0.267 bar - 0.45 bar
... The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum free air displacement. ...
Nitto Kohki Europe
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
... The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve that prevents reverse-flow ...
TSURUMI MANUFACTURING CO., LTD.
Pressure: 0.4 bar - 2.5 bar
... Full PTFE bellows pump Pump head can be rotated in 90° steps and connected to the gas line from the top or side Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on the vacuum ...
M&C TechGroup Germany GmbH
Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C
... capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and + 40 °C. The construction ...
M&C TechGroup Germany GmbH
Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C
... - Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material of sample-contacting ...
M&C TechGroup Germany GmbH
Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar
... The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed air connection ...
Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm
... High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level ...
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
... Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades of excellent service. Applications - ...
Emile Egger & Cie SA
Flow: 180 l/s
Pressure: 16 bar
Head: 100 m
... without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge with a high content of fibers - All viscous media - Suspensions with ...
Emile Egger & Cie SA
Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m
... The typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation plants Vaporisation ...
Emile Egger & Cie SA
Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar
... depending on the product involved Standard rotation :Clockwise rotation (A) Input/Output :2 holes 0 6mm on the rear of the pump. Delivered with connecting block G1/4DD Drive shaft diameter :0 12mm with a 4mm key Drive shaft height ...
POMTAVA SA
Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar
... depending on the product involved Standard rotation :Clockwise rotation (A) Input/Output :2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4 Drive shaft diameter : Ø 12mm with a 4mm key Drive shaft height ...
POMTAVA SA
Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar
... depending on the product involved Standard rotation :Clockwise rotation (A) =Input/Output :2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4 Drive shaft diameter : Ø 12mm with a 4mm key Drive shaft height ...
POMTAVA SA
Pressure: 8, 96 bar
... contrast to screw pumps, WIWA THICK FILM PUMPS can be rinsed and cleaned with thinner without any problems. Thus, they are also ideally suited for processing epoxy-based materials. Thanks to the use of quick couplings, ...
WIWA
Flow: 25 l/min
Pressure: 8 bar
Weight: 10 kg
... material hose. Positive features include the low air consumption, the pressure limitation and the compact size, with which you will not feel crowded even on small construction sites. Fields Of Application Cavity filling Masonry ...
WIWA
Pressure: 8 bar - 240 bar
Weight: 23 kg
... materials Easy operation and maintenance of the unit Fast start-up of the pump with very low air input Easy handling. The WIWA INJECT HD 4 and HD 5 are pneumatic 1K piston pumps characterized by large output and ...
WIWA
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 cm³/rev to 4 cm³/rev. ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
... KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two gear shafts in the ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity of MGO and DMA according to ISO 8217. Furthermore, the pumps exhibit extremely good efficiency, especially at high ...
KRACHT GmbH
Flow: 2 l/h - 22.5 l/h
Pressure: 0 bar - 5 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to ...
Verder Liquids
Flow: 3 l/h - 39 l/h
Pressure: 0 bar - 5 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to ...
Verder Liquids
Flow: 10.4 l/h - 125 l/h
Pressure: 0 bar - 6 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to ...
Verder Liquids
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
... pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil tank capacity is 25L and oil flow ...
... >Product Overview
The Uniphos ASP-40
pump is a lightweight piston-and-barrel air sampling
pump that creates a
vacuum in the
pump barrel to draw an accurate volume of sample air ...
... The Gas Tester II H Pump is set for action by compressing the bellows, which locks into place, and the pump is primed to draw a sample by simply pressing the release button. This allows the user to begin ...
... The easy to use and low-cost Gas Tester I pump can be used with one hand by simply pressing the rubber bulb by one’s thumb. In this way, a 100ml of air is drawn through the tube. These pumps ...
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve. ...
Srl
Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve. ...
Srl
Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve. ...
Srl
Flow: 5, 2.7, 0.9, 2, 1.3 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite braid NBR flange O-ring, Viton® or PTFE seal ...
Pompes Japy
Flow: 2.7, 1.3, 2, 0.9 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile O-ring Seal: nitrile O-ring, NBR flange O-ring. Specifications ...
Pompes Japy
Flow: 2, 1.3, 2.7, 0.9 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover: bronze Inner mechanism: bronze Lever: bronze (brass as an option) Flange: bronze threaded oval Waterproofing: ...
Pompes Japy
Flow: 9.3 m³/h - 37.2 m³/h
Pressure: 8 MPa - 35 MPa
Power: 110 kW - 200 kW
... high-pressure pumps are high-flow plunger pumps that absorb the technology of imported products and use finite element to check carefully. The liquid ends can be equipped with a valve disc structure or a conical valve ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... efficiency of the large high-pressure pump is higher than that of the small high-pressure pump, so energy saving From a point of view, it is better to choose one large high-pressure pump ...
Tinajin Harvest
Flow: 25 l/min - 195 l/min
Pressure: 8 MPa - 80 MPa
Power: 30 kW - 90 kW
... high-pressure pump is an improved product of the 3D2-S high-pressure pump. Its characteristics are: First, the capacity of the lubricating oil in the crankcase increases, the lubricity is improved, and the lubricating ...
Tinajin Harvest
Flow: 300 m³/h - 86,400 m³/h
Power: 0.55 kW - 37 kW
Fluid temperature: -20 °C - 200 °C
... MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, driving ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0.3 m³/h - 86.4 m³/h
Power: 5.5 kW
Input diameter: 25 mm - 150 mm
... MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 180 l/h - 30,000 l/h
Power: 1.5 kW - 15 kW
... The sine
pump is composed of special rotors and is used for transporting high-viscosity materials with easily granular components, such as yogurt with fruit pulp, granular sauces, and so on.
A gate functions as a seal between the inlet ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0 m³/h - 3.6 m³/h
Power: 7.5 kW
Length: 2,490 mm
Flow: 0 m³/h - 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m
... 1. The motor and pump are coaxial conjoined for eliminating fluctuations. 2. Durable mechanical seal prevents from leakage and keeps long life. 3. Compact & robust structure for saving space and for easy installation. ...
... the pur-pose of transporting liquid is achieved. Applications: 1﹒ Wastewater 2.oil 3. liquid paper 4. concrete water 5. mining industry 6. Paint 7. cosmetic 8. food industry 9. fish jam 10.sludge ...
... * Low Noise * High Durability * No Lubrication Necessary * High Efficiency * Compact and Powerful * Smooth Air Flow * Simple Maintenance ...
the best suppliers