Pumps for the mining industry

Flow: 1,079 l/min
Pressure: 8.3 bar

... All EXP Series pumps are “Process Ready” and enhanced with electronic interface capability providing accurate, electronically controlled operation. Combine our pump with the ARO® ...

Flow: 870 l/min
Pressure: 6.2 bar

... pneumatic centrifugal pumps provide effective flow rates up to 230 gpm (870.5 lpm). Compact in size, these pumps are useful for dewatering trenches, holes, bilges, pits or other bodies ...

Flow: 20 m³/h
Pressure: 3 bar

... bioprocessing pump with its patented ReNu SU Technology® cartridge. Quantum offers a step change in pump technology enabling higher downstream process yields throughout the pressure range, ...

Flow: 0 us gal/min - 7 us gal/min
Pressure: 30 psi - 100 psi

... for use with quick-release industrial or sanitary Tri-Clamp® LoadSure® elements for 30-100psi operation and one minute maintenance S, U, Du and Bp pumps are NEMA 2 cased pumps. SN, ...

Flow: 0 us gal/min - 24 us gal/min
Pressure: 30 psi - 60 psi

... for use with quick-release industrial or sanitary Tri-Clamp® LoadSure® elements for up to 60psi operation and one minute maintenance S, U, Du and Bp pumps are NEMA 2 cased pumps. ...

Flow: 0 m³/h - 1,600 m³/h
Pressure: 0 psi - 130 psi
Head: 0 m - 37 m

The Warman® WGR Pump together with its unique streamlined design allows easy access to all of its pump parts. It has an adjustable impellers that sustains high efficiency and lowers total operating costs. ...

Flow: 0 l/min - 57 l/min
Pressure: 0 bar - 8.2 bar
Head: 4.5 m

... corrosion-free plastic. It has a few, easily accessible construction parts. The pump has a flow rate to 65 l/min and can safely run dry. An explosion-proof version is available which complies with ATEX ...

Flow: 0 l/min - 182 l/min
Pressure: 0 bar - 8.2 bar
Head: 5.2 m

... and small tank transfer, pickling solutions, chemical feed, etc. Features: Absolutely lube-free and non stalling operation Can safely run dry Self-priming dry or wet Centre block made of corrosion-free ...

Flow: 0 l/min - 435 l/min
Pressure: 0 bar - 8.2 bar
Head: 6.7 m

DMP 1 1/2'' double diaphragm pump is an industrial solution for applications like filter press, tank cleaning, pigment and resin treatment. The system allows operation without requiring lubrication and ...

Flow: 250 m³/h
Pressure: 10 bar

The Flowrox progressive cavity pump is designed for the most demanding industrial slurry and paste pumping applications, especially with high viscous or shear sensitive liquids and sludges. Due to unique ...

Flow: 15 m³/h - 1,650 m³/h
Pressure: 420 bar
Head: 300 m - 4,200 m

Design Horizontal, radially split, multistage ring-section pump with radial impellers, single- or double-entry. Applications Handling of feed water and condensate in power stations and industrial ...

Flow: 23 m³/h - 14,000 m³/h
Head: 5 m - 90 m

Design Premium design hard iron pumps for long wear life pumping severe slurries. The basic, single-wall construction and heavy section, hard metal wet end combined with the cartridge bearing assembly ...

Flow: 0 m³/h - 4,800 m³/h
Pressure: 110 bar
Head: 0 m - 285 m

... single-stage centrifugal pump that are horizontally, radially spilt volute casing pump with a back pull-out design to API 610. Specific requirements of ISO 13709 or 11th edition. The pumps ...

The Piusi Bucket Pump is an handy manual pump suitable for dispensing grease and oil in limited quantities.

Flow: 15.5 l/min
Pressure: 3 bar - 8 bar

PIUSI P5.5:1 PIUSI P5.5:1 is a pump for transferring lube oil. Designed to be used also in particular application fields, it has been manufactured with the most suitable materials to guarantee high performance and ...

PIUSI HAND PUMP FOR OIL Piusi Hand Pump is a vane hand pump specifically designed for the transfer of low viscosity oil. Designed and engineered by the R&D team of Piusi, this manually ...

Flow: 0 l/h - 93 l/h
Pressure: 0 bar - 2 bar
Power: 0.37 kW

... the Verderflex® Rapide 'S' roster of industrial quality tube pumps. The efficiently designed pump is perfectly qualified for use in heavy-duty pumping applications involving highly viscous ...

Flow: 0 l/min - 3.834 l/min
Pressure: 0 bar - 2 bar
Power: 0.18 kW

... to operate industrial tube pumps that are perfect for heavy duty applications, where viscous mediums are being pumped. These industrial peristaltic tube pumps have ...

Flow: 0 l/h - 189 l/h
Pressure: 0 bar - 2 bar
Power: 0.37 kW

... belongs to the “S” family. This range of industrial pumps are simple to operate and excel in heavy duty applications, where high viscosity mediums are being pumped. This peristaltic range of tube pumps ...

Flow: 30, 60 m³/h
Head: 12, 15, 18 m
Power: 3.7, 5.5, 7.5, 9, 11 kW

... submersible dredge pumps Characteristics: Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Electric pumps ...

Flow: 100, 150, 200 m³/h
Head: 5 m - 46 m
Power: 18 kW - 90 kW

Electric submersible dredge pumps. Slurry and mining pumps! Characteristics: Pump complete with standard agitator to put solids in suspension ready for pumping High ...

Flow: 200 m³/h - 1,200 m³/h
Head: 18 m - 55 m
Power: 80 kW - 220 kW

DRAGFLOW HEAVY DUTY PUMPS Electric subersible agitator pumps Characteristics: Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle ...

Flow: 0 l/min - 20 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

AIR OPERATED DOUBLE DIAPHRAGM PUMP, 20lts/min, 3/8" CONNECTIONS Connections 3/8" BSP Max flow-rate 20 l/m Max head 80m Air connection 6mm Self-priming capacity 6 m Diameter of passing solids 3 mm Max pressure 8 bar Materials PP, ...

Flow: 0 l/min - 35 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

Connections 1/2" BSP Max flow rate 35 lt/min Max head 80 m Air connection 6 mm Self-priming capacity 5 m Diameter of passing solids 3.5 mm Max pressure 8 bar Materials PP,PVDF,POMc,SS Noise level 65 dB Max viscosity 15000 cps

Flow: 0 l/min - 55 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

FLUIMAC® manufactures new types of pumps that are developed around air distribution system, the technology of the diaphragm, the geometry of pumping compartments and the system of the valves. This innovation enhances ...

Flow: 20 l/min - 35 l/min

RAASM pneumatic piston pumps for oil transfer and distribution over short and medium distances are ideal for the pumping of lubricants and similar that are of medium-high viscosity; they can also be used with other fluids, ...

Flow: 14 l/min - 40 l/min

RAASM pneumatic piston pumps for oil transfer and distribution over short and medium distances are ideal for the pumping of lubricants and similar that are of medium-high viscosity; they can also be used with other fluids, ...

Flow: 30 l/min - 45 l/min

RAASM pneumatic piston pumps for oil transfer and distribution over short and medium distances are ideal for the pumping of lubricants and similar that are of medium-high viscosity; they can also be used with other fluids, ...

Flow: 200 m³/h
Pressure: 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Our mining packages have been employed in the mining market for over 30 years. The pump is based on the rugged E-Range Flexishaft pump however it has been specifically ...

Flow: 1.2, 3 m³/min
Head: 54, 40 m
Power: 1.5 kW - 11 kW

... three-phase cast iron high head drainage pump. The cast iron body with high-chromium cast iron impeller enables it to withstand demanding conditions, including highly abrasive liquid found in construction, aggregate and ...

Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW

... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to ...

Flow: 12.6 m³/h - 5,400 m³/h
Pressure: 0.6 bar - 7 bar
Head: 6 m - 68 m

SH pump series are horizontal, cantilevered, single-stage centrifugal pump. It is designed for pumping tough slurries which is high-abrasive or corrosivre and high-density. The horizontal pumps ...

Flow: 8 m³/h - 1,826 m³/h
Head: 2 m - 135 m

... according to the requirements of the customer. ZJ series slurry pump is a type of single-stage, single-suction, horizontal, cantilevered, centrifugal slurry pump. The ZJ series pumps ...

Flow: 1 l/s - 533.3 l/s
Head: 3.1 m - 94.2 m

ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump ...

... slurry pump is a type of centrifugal pump, designed for pumping liquid containing solid particles in mining, metallurgy,coal washing ,sewage water treatment,power plant,dredging.and chemical ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

... biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants

Flow: 0.5 l/s - 12.5 l/s
Pressure: 0 bar
Head: 0.99 m - 18 m

Electromechanical assembly in B10 bronze, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals with oil lubrication. Oil bath motor.

Flow: 100 m³/h - 20,000 m³/h
Pressure: 145 bar
Head: 10 m - 1,200 m

The ZM axially split case, single or double stage, centrifugal pumps are designed to deliver high-performance in difficult conditions. It is recommended for heavy-duty petrochemical applications thanks ...

Flow: 100 m³/h - 20,000 m³/h
Pressure: 100 bar
Head: 10 m - 1,200 m

... two stage, horizontal pump engineered to comply with the latest API 610 standard (BB1 type). It is a process and transfer pump design developed for the tough demands of pumping crude ...

Flow: 100 m³/h - 20,000 m³/h
Pressure: 145 bar
Head: 10 m - 1,200 m

The transfer pump of the ZLM design was developed for stringent demands, being compatible with various applications in the industry. The main special pipeline pump is recommended for ...

The 351120 PumpMaster (PM) 2 is an oil pump engineered by Samoa. It is suitable for use in quick and clean conveying of lubricants, and other non-corrosive fluids. The pump features a double way operation ...

... double-acting air operated medium pressure piston pump and high volume pump. These pumps are used for pumping out lubricants in medium size installations through multiple dispensing points ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

... Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

Submersible pumps made of vinyl ester thermosetting resins, Saturnsub have a high mechanical strength, dimensional stability and an excellent chemical resistance. The electric motor is completely made ...

Flow: 0 m³/s - 0.3472 m³/s
Pressure: 0 Pa - 800,000 Pa
Head: 0 m - 80 m

A world premiere created by Argal® Pumps and its team. The main functional features and applications are generally known but there was missing a concrete solution of big-sized pneumatic pump made of non-metallic ...

Flow: 450 l/min
Pressure: 8 bar
Head: 70 m

... years, our engineers worked on and designed a new range of double diaphragm pumps: QUANTUM range offers more than efficiency and reliability. These original double diaphragm pumps do provide high performance ...

Flow: 225 m³/h
Head: 79 m
Power: 87 kW

The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated ...

Flow: 450 m³/h
Head: 95 m
Power: 130 kW

The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated ...

Flow: 950 m³/h
Head: 85 m
Power: 250 kW

The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated ...

Flow: 0 us gal/min - 360 us gal/min
Pressure: 0 psi - 2,300 psi
Head: 0'00" ft - 200'00"

Slim Line Pumps are designed for use as dewatering pumps where space is limited. Typical applications for these pumps are manholes, vaults, blast holes, mine and construction ...

Flow: 0 us gal/min - 60 us gal/min
Pressure: 0 psi - 1,800 psi
Head: 0'00" ft - 195'00"

Slim Line Pumps are designed for use as dewatering pumps where space is limited. Typical applications for these pumps are manholes, vaults, blast holes, mine and construction ...

Flow: 400 m³/h
Pressure: 48 bar

... • Ship building industry as waste oil, oily bilge water • Ceramic industry as clayey sludges, lime, glaze • Fish industry as fish flours, entrails and other cutted fish parts • Mining ...

Flow: 400 m³/h
Pressure: 48 bar

... operating temperature lesser than or equal to 180 °C. The N series can also used in different kinds of industries such as paper, chemical, fish, mining, drilling, agriculture, refinery, petrochemisty, ...

Flow: 1,260 m³/h - 2,772 m³/h
Head: 13 m - 63 m
Power: 0 kW - 560 kW

The EHM Series consists of slurry pumps. These pumps can be employed in mining, coal, metallurgical and construction material fields applications. They are well suited ...

Flow: 162 m³/h - 360 m³/h
Head: 12 m - 56 m
Power: 0 kW - 120 kW

The EHM Series slurry pump is designed for tough corrosive, high and minimal density slurries. This device is suitable for high head slurries in the metallurgical, mining, coal, power, building material ...

Flow: 360 m³/h - 828 m³/h
Head: 10 m - 61 m
Power: 0 kW - 300 kW

The slurry pumps of the EHM series represent an excellent solution for handling strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building ...