Flow: 0 l/min - 450 l/min
Head: 0 m - 32.5 m
Power: 1.1 kW - 2.2 kW
... These pumps are suitable to be used in domestic, agricultural and industrial applications when big deliveries are requested with medium discharge head. Available also with 2″ x 2″ inlet anda outlet. ...
STAC S.r.l.
Flow: 12 m³/h
Head: 230 m
Power: 0.75 ch - 1.5 ch
... install expensive filters or shielded cables to avoid damaging the motor, as the inverter is integrated. Features pumps with pump body, delivery, integrated non-return valve in Aisi 304 stainless steel impellers ...
STAC S.r.l.
Flow: 100, 140, 220 l/min
Power: 0.37 kW - 2.2 kW
... Newly designed 5″ monobloc submersible pumps for domestic / civil or small industrial applications (distribution or withdrawal of water from wells or collection tanks, irrigation, drip irrigation, pressure ...
STAC S.r.l.
Pressure: 30, 10 bar
... ViscoTec dispenser 3VMP22, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, ...
Flow: 0.0012 l/min - 0.09 l/min
Fluid temperature: 0 °C - 40 °C
Weight: 110 g
A2V Mécatronique
Flow: 0.0052 l/min - 0.09 l/min
Fluid temperature: 0 °C - 50 °C
Weight: 110 g
A2V Mécatronique
Flow: 0.001 l/min - 0.14 l/min
Fluid temperature: 0 °C - 40 °C
Weight: 90 g
A2V Mécatronique
... The world's first marine fuel pump purpose-built for fuel flexibility The DesFuel Deepwell Pump is purpose-built for alternative fuel flexibility, handling LNG, ammonia, methanol, and LPG without modification. With ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C
... The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed ...
DESMI Pumping Technology A/S
Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to ...
Maximator GmbH
Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...
Maximator GmbH
Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...
Maximator GmbH
... ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These ...
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation o No pump ...
SAMOA Industrial, S.A.
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive Frictionless ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System to activate, ...
SAMOA Industrial, S.A.
Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW
... STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...
SAER
Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW
... PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation systems, for ...
SAER
Flow: 5,000, 4,500 m³/h
Head: 210, 318 m
Power: 900, 1,200 kW
... SPLIT-CASING PUMPS Our extremely short delivery times prove it: SKD is the split-casing range, extremely reliable and efficient, and designed, manufactured and tested in Italy. It is able to meet the needs of numerous uses in various ...
SAER
Flow: 20 l/min
Pressure: -0.187 bar - 0.18 bar
Power: 21 W
... The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, it operates ...
Nitto Kohki Europe
Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W
... The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure and 0.1 bar rated ...
Nitto Kohki Europe
Flow: 7 l/min
Pressure: -0.267 bar - 0.45 bar
... The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum free air displacement. ...
Nitto Kohki Europe
Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m
... IE3 electric pump VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock ...
Zenit
Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW
... High efficiency IE3 electric pump Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks ...
Zenit
Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW
... Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications ...
Zenit
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
... The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve that prevents reverse-flow ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 cm³/rev to 4 cm³/rev. ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
... KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two gear shafts in the ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity of MGO and DMA according to ISO 8217. Furthermore, the pumps exhibit extremely good efficiency, especially at high ...
KRACHT GmbH
Flow: 2 l/h - 22.5 l/h
Pressure: 0 bar - 5 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to ...
Verder Liquids
Flow: 3 l/h - 39 l/h
Pressure: 0 bar - 5 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to ...
Verder Liquids
Flow: 10.4 l/h - 125 l/h
Pressure: 0 bar - 6 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to ...
Verder Liquids
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated for filling off high ...
Bürkle
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...
Bürkle
Flow: 14 l/min
... br>With commercially available reusable pumps, there is a risk that the liquid to be filled will be contaminated by the pump - especially if the pump is used for different media or containers and no professional ...
Bürkle
Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... efficiency of the large high-pressure pump is higher than that of the small high-pressure pump, so energy saving From a point of view, it is better to choose one large high-pressure pump ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 187 cm
... -pressure pump should be repaired every six months to prevent working with illness. During the non-use period, the high-pressure pump should be lifted away from the water source in time, and the water accumulated in ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large high-pressure pump ...
Tinajin Harvest
Flow: 0.0001 l/min - 1 l/min
Pressure: 15 MPa
Width: 276 mm
... The ECP201L Preparative Pump is an innovative, powerful, and cost-effective unit for preparative liquid chromatography where high pressure is needed. The pump with 4 low-pressure valves delivers a flow rate of up to 1000 ...
ECOM
Flow: 0.0001 l/min - 3 l/min
Pressure: 5 MPa
Width: 276 mm
... Preparative HPLC pump with a very high flow rate of up to 3000 ml/min at the output pressure of up to 5 MPa (725 psi). The ECP301 L preparative pump is an innovative, powerful, and cost-effective unit for preparative ...
ECOM
Flow: 0.001 l/min - 10 l/min
Pressure: 40 MPa
Width: 280 mm
... must be ordered together with the pump. With a flow rate of 0.001-10.00 ml/min and a pressure limit at 40 MPa is this pump suited for analytical applications in liquid chromatography. The pump is designed ...
ECOM
Flow: 0 m³/h - 3.6 m³/h
Power: 7.5 kW
Length: 2,490 mm
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
... pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil tank capacity is 25L and oil flow ...
... variants
- VP-220 UC — Type: 3 ph; Pump absorbed power (P2) 50Hz / 60Hz: 0.14 / 0.21 kW; 50/60Hz dual: STD; DN (BSPP): 1/4; Qmax 50Hz: 11 l/min; Hmax 50Hz: 38 m.
- VPm-220 UC — Type: 1 ph; Pump absorbed
SIMACO ELETTROMECCANICA
Flow: 0 l/min - 5.5 l/min
Power: 0.18 kW
Weight: 1.2 kg
... Product Details - Name: KN39 MINI DC-24V - Type: DC 24V - Absorbed Power (P1): 0.18 kW - Connection: 1/8" BSPP - Maximum Flow Rate (Qmax) at 5500 rpm: 5.5 - Maximum Head (Hmax) at 5500 rpm: 55 Characteristics - Suitable for clear waters/oils ...
SIMACO ELETTROMECCANICA
Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
... MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures ...
SIMACO ELETTROMECCANICA
Flow: 873.6 m³/h
Head: 7.9 m
Power: 23 kW - 26.5 kW
... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...
FAGGIOLATI PUMPS
Flow: 948.8, 1,465.3 m³/h
Head: 32.8, 26 m
Power: 118 kW - 122.7 kW
... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...
FAGGIOLATI PUMPS
Flow: 1,088.5 m³/h
Head: 11 m
Power: 43 kW - 45.5 kW
... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...
FAGGIOLATI PUMPS
Flow: 0 m³/h - 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m
... 1. The motor and pump are coaxial conjoined for eliminating fluctuations. 2. Durable mechanical seal prevents from leakage and keeps long life. 3. Compact & robust structure for saving space and for easy installation. ...
... the pur-pose of transporting liquid is achieved. Applications: 1﹒ Wastewater 2.oil 3. liquid paper 4. concrete water 5. mining industry 6. Paint 7. cosmetic 8. food industry 9. fish jam 10.sludge ...
... * Low Noise * High Durability * No Lubrication Necessary * High Efficiency * Compact and Powerful * Smooth Air Flow * Simple Maintenance ...
Flow: 1 l/min - 1.5 l/min
Pressure: 0.5 bar - 20 bar
Power: 0.07 kW
... 316L or ceramic shaft) and
pump body materials (304, 316L, PPS) allow fluid compatibility and customization.
Model Specification
Model: MPB 015 B A A A 24V 70W
Configuration digits: 1 2 3 4 5 6 7 8
1
Pump ...
Flow: 6 l/min - 10 l/min
Pressure: 0.5 bar - 18 bar
Power: 0.38 kW
... MPB100 micro magnetic-drive gear pump driven by a 380W brushless DC motor. Designed for continuous, low-pulsation fluid transfer with a nominal displacement of 3.6 ml/rev and flow rates up to 10 LPM. Suitable for a wide ...
Flow: 45 l/min - 100 l/min
Pressure: 0.5 bar - 5 bar
Fluid temperature: -40 °C - 100 °C
... Product Overview
The magnet-drive MPB1000
micro magnetic gear
pump provides a fully sealed
pump chamber with no pulsation, no leakage and low noise.
Compact and high-performance, ...
Flow: 3.6 l/h
Pressure: 0 bar - 20 bar
... Flow Rates: 0.625 µl/min - 60mL/min Pressure: Up to 20 bar Material: Glass syringe with PCTFE Applications: Grignard chemistry, lithiation reactions, other orgnometallic reactions, etc. Can handle corrosive chemicals Pulseless and continuous ...
Flow: 220 l/min
Pressure: 310 bar
Input diameter: 275 mm - 400 mm
... Product Description
Our drum
pump AP200-56-1 enables the transfer of adhesives and sealants. It can be used to supply one or more dispensing workstations or dispensing systems, as well as for filling cartridges. This allows ...
the best suppliers