Flow: 65 l/min
Pressure: 6.3 bar
... Rami Yokota BV YPP-1 is a piston-driven pump that is engineered for pumping liquids from drums. It can accommodate maximum capacity of 65 l/min and can exhibit maximum air pressure of 6.3 bar. This 8.8 kg pump fits to ...
Pressure: 6.3 bar
Head: 25, 41 m
Output diameter: 65 mm
... The Rami Yokota BV YP-18 is a sump pump made from bronze, to pump aggressive fluids such as sea water. It can accommodate maximum capacity of 55 t/h and can exhibit maximum air pressure of 6.3 bar. Furthermore, its bronze ...
Flow: 2 m³/h - 18 m³/h
Pressure: 1 bar - 5 bar
... Small pneumatic suction pumps PA The assembly of a pressure adjuster equipped with pressure gauge and of an FCL filter on the suction inlet connection of a vacuum generator of the M .. SSX range has ...
VUOTOTECNICA
Flow: 15 m³/h - 320 m³/h
Pressure: 1 bar - 6 bar
... Pneumatic suction pumps PA A state of the art range of ejectors has allowed creating this range of pneumatic suction pumps featuring an excellent ratio between the amount of consumed air and sucked air, as well as ...
VUOTOTECNICA
Flow: 2.7 m³/h - 31 m³/h
Pressure: 1 bar - 5 bar
... Small pneumatic blowing pumps PS The assembly of a pressure adjuster equipped with pressure gauge and of an FCL filter on the suction inlet connection of a vacuum generator of the M .. SSX range has ...
VUOTOTECNICA
Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW
... STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...
SAER
Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW
... PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation systems, for ...
SAER
Flow: 5,000, 4,500 m³/h
Head: 210, 318 m
Power: 900, 1,200 kW
... SPLIT-CASING PUMPS Our extremely short delivery times prove it: SKD is the split-casing range, extremely reliable and efficient, and designed, manufactured and tested in Italy. It is able to meet the needs of numerous uses in various ...
SAER
Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW
... ZPD external gear dosing pump
Our most flexible line of external gear
pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific ...
Beinlich Pumpen
Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C
... ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based on fluid viscosities ...
Beinlich Pumpen
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
... External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact with bearings ...
Beinlich Pumpen
Flow: 0.1 m³/h - 200 m³/h
Small size standardised models help to keep your production areas dry and clean. Use our Liquid-Conveyors for the easy and reliable suction and disposal of various liquids like oil or emulsion and even greasy substances. Our units can filter the liquids ...
... AC pump Pump: for lifting up and down the equipment ...
Pressure: 0 bar - 4,000 bar
... -speed hand pumps for very high pressure up to 4000 bar PMS-PDS Series are the FPT hand pumps on very high pressure. • Hand pumps with two speeds from ...
FPT Fluid Power Technology
Pressure: 1,600 bar - 4,000 bar
... • Manual pumps for very high pressures, light, compact and easy to carry, made in aluminum • At the maximum pressure, the 1600 bar and 3000 bar hand pumps develop ...
FPT Fluid Power Technology
Pressure: 3,000, 1,600, 4,000 bar
Weight: 7.8 kg
... • Manual pumps for very high pressures, light, compact and easy to carry, made in aluminium • At the maximum pressure of 1600 bar – 23000 psi the manual pumps develop ...
FPT Fluid Power Technology
Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW
... Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The ...
Brinkmann Pumpen
Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW
... Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and ...
Brinkmann Pumpen
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
... .60° C Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical seal - - SiC O-rings - - Viton Optional: ...
Brinkmann Pumpen
Flow: 0 l/min - 450 l/min
Head: 0 m - 32.5 m
Power: 1.1 kW - 2.2 kW
... These pumps are suitable to be used in domestic, agricultural and industrial applications when big deliveries are requested with medium discharge head. Available also with 2″ x 2″ inlet anda outlet. ...
STAC S.r.l.
Flow: 12 m³/h
Head: 230 m
Power: 0.75 ch - 1.5 ch
... install expensive filters or shielded cables to avoid damaging the motor, as the inverter is integrated. Features pumps with pump body, delivery, integrated non-return valve in Aisi 304 stainless steel impellers ...
STAC S.r.l.
Flow: 100, 140, 220 l/min
Power: 0.37 kW - 2.2 kW
... Newly designed 5″ monobloc submersible pumps for domestic / civil or small industrial applications (distribution or withdrawal of water from wells or collection tanks, irrigation, drip irrigation, pressure increase, washing ...
STAC S.r.l.
Pressure: 10, 30 bar
... ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, ...
ViscoTec Pumpen- u. Dosiertechnik GmbH
Pressure: 30, 10 bar
... ViscoTec dispenser 3VMP22, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, ...
ViscoTec Pumpen- u. Dosiertechnik GmbH
Pressure: 40 bar
... ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, ...
ViscoTec Pumpen- u. Dosiertechnik GmbH
Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Power: 7 W - 32 W
... precision laboratories that meet the CNAS national laboratory accreditation standards ♦ More than 60+ patents in the micro water pump industry, strong research and development strength, and master advanced industry technology ♦ ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 8 l/h - 12 l/h
Pressure: 0.6 bar - 0.8 bar
Fluid temperature: -40 °C - 100 °C
... function • Long service life aided by liquid cooled electronics and DC brushless design giving service life >20,000 hours • Compact and low noise characteristics. • IP68 • Protection Function: Blocked-Protection，Polarity Protection ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 4.5 l/min
Pressure: 130,000 Pa
Fluid temperature: 5 °C - 70 °C
... offer multiple component configurations allowing them to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0.0012 l/min - 0.09 l/min
Fluid temperature: 0 °C - 40 °C
Weight: 110 g
A2V Mécatronique
Flow: 0.0052 l/min - 0.09 l/min
Fluid temperature: 0 °C - 50 °C
Weight: 110 g
A2V Mécatronique
Flow: 0.001 l/min - 0.14 l/min
Fluid temperature: 0 °C - 40 °C
Weight: 90 g
A2V Mécatronique
... The world's first marine fuel pump purpose-built for fuel flexibility The DesFuel Deepwell Pump is purpose-built for alternative fuel flexibility, handling LNG, ammonia, methanol, and LPG without modification. With ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C
... The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed ...
DESMI Pumping Technology A/S
Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to ...
Maximator GmbH
Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...
Maximator GmbH
Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...
Maximator GmbH
... ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These ...
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, China University ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... and corrosion conditions. Different product structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. There are also various impeller ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m
... TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, and the shaft seal ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation o No pump ...
SAMOA Industrial, S.A.
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive Frictionless ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System to activate, ...
SAMOA Industrial, S.A.
Flow: 20 l/min
Pressure: -0.187 bar - 0.18 bar
Power: 21 W
... The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, it operates ...
Nitto Kohki Europe
Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W
... The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure and 0.1 bar rated ...
Nitto Kohki Europe
Flow: 7 l/min
Pressure: -0.267 bar - 0.45 bar
... The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum free air displacement. ...
Nitto Kohki Europe
... BS TOWER PETROL STATION EQUIPMENT operating pressure: 12 bar operating temp. range: up to 45 °C APPLICATIONS Filling tyres with compressed air Water supply BS TOWER series can be used in variety of applications. For applications ...
... BS 12-3,5 PETROL STATION EQUIPMENT - tyre inflators operating pressure: 12 bar operating temp. range: 1,5 to 45 °C flow capacity (ISO 1217): 350 Nl/min APPLICATIONS filling tyres with compressed air water supply BS12-3.5 series can be ...
... AWS PETROL STATION EQUIPMENT - tyre inflators operating pressure: 10 bar operating temp. range: up to 45 °C flow capacity (ISO 1217): 170 Nl/min APPLICATIONS filling tyres with compressed air water supply AWS series can be used in variety ...
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW
... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
... The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
... Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades of excellent service. Applications - ...
Emile Egger & Cie SA
Flow: 180 l/s
Pressure: 16 bar
Head: 100 m
... Turo® Vortex TA impeller for pumping of raw municipal sewage with a high content of fibers without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge with a high content ...
Emile Egger & Cie SA
Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m
... The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications - Demanding fluids in the chemical ...
Emile Egger & Cie SA
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 cm³/rev to 4 cm³/rev. ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
... KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two gear shafts in the ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity of MGO and DMA according to ISO 8217. Furthermore, the pumps exhibit extremely good efficiency, especially at high ...
KRACHT GmbH
Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar
... Dura 5 peristaltic pump for high pressure low volume. Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by up to 70% compared ...
Verder Liquids
Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar
... 7 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by up to 70% compared ...
Verder Liquids
Flow: 0 l/h - 222 l/h
Pressure: 6, 12 bar
... 10 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by up to 70% compared ...
Verder Liquids
Flow: 1.5 l/min
Power: 50 W
... The connection technology of the pump head is designed for fast handling. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston pump ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 5.4 l/min
Power: 100 W
... The connection technology of the pump head is designed for fast handling. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston pump ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 10 l/min - 350 l/min
Power: 30 W
... The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston pump heads. Pump heads from other manufacturers can also be fitted without ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 14 l/min - 26 l/min
... The OTAL® hand pump PP is a compact, universal, manually operated pump for filling and transferring liquids from containers and drums. It works on the air-over-pressure principle so that only the delivery ...
Bürkle
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated for filling off high ...
Bürkle
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction that is capable ...
Bürkle
the best suppliers